Used Pegas Gonda 350X400 H for sale (24,224)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Deln Nuewhdzbs Huscg Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Machines are currently in production and can be viewed by appointment.

Condition: used, Year of construction: 1990, fuel type: diesel, lifting capacity 2,5 Tonnen Luftreifen Dsln Nujwhq Arj Huscg height of stroke 4400 mm 1200 mm defekt mindestens 3000 St

Condition: excellent (used), Year of construction: 1997, Schliesing 400 MX Weight without accessories 2000 kg Dsln Neini U Teu Hujcg Engine power 37 kW capacity 16 m³/h passage 200 mm

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Dcsln Netn Rarju Husg

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Dsln Newhd Eyou Hujcg Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Dsln Nuewg Duxe Huscg Tool breakage detection

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Djln Njvu Tthju Hujcg Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm Dceln Njg Akgteu Husg hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Forkardt F315 J8 H lathe chuck - outer diameter 320mm,used, good condition, 100% working, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcjlsulqhmon Nu Huog

Condition: excellent (used), Countersink make Sassex 90 degrees diameter 65 mm27 mm smallest hole to be countersunk MK 4Type H 3 52.1-65Ges.length 284 mm Dcjln Nod St Nweu Hueg

Condition: used, Year of construction: 2017, Carrying capacity: 500 kg Dcelsv Ei Shsn Nu Husg Number of suction pads: 8 With chain hoist: Yes Mounting flexible: Yes For panels: Yes Horizontal panel transport: Yes Conformity marking: CE mark

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Deln Nu Hswf Dddouscg very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 1982, Spindle diameter 160 mm Axes X 3000 mm Y 2500 mm Z 1600 mm W 1250 mm Dsln Newhpxrsu Huecg Spindle revolutions 800 rpm Machine dimensions 5900 x 12440 mm x 7620 mm Machine weight 68 000 kg Including rotary table E 20

Condition: used, Year of construction: 2014, operating hours: 2,638 h, 2014 | Haulotte | Haulotte H 25 TPX (25.3 meters) | Used Telescopic Boom Lift | 2638 hours Dcoln Nuswf Aqco Hujg 📍Location: France, Illange 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 19200 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 34 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine needs maintenance ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "36687 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 1990, - incl. tools & accessories - Year of construction 1990 Technical data: - Capacity: 60 t - Stroke rate: 52 /min - ram adjustment: 80 mm - Table dimensions: 750 x 480 mm - ram surface: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Motor speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V Djln Nusrz R Eqo Hujcg - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Control cabinet dimensions WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 20500 kg Main Drive Spindle motor power 400 V, 50 Hz This 4-axis HELLER MCS-H 250 was manufactured in 1998. A robust horizontal machining centre, it offers reliable performance for diverse machining needs. Consider the opportunity to buy this HELLER MCS-H 250 horizontal machining centre. Contact us for more information. Dcelnewgf Ero Nu Hueg Application Types Milling

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Dcelnov Ezk No Nu Huog Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet Dceln Newf A U Ueu Huog AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 2016, operating hours: 11,339 h, lifting height: 3,700 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, total height: 2,600 mm, total length: 2,900 mm, total width: 1,250 mm, color: other, Empty weight: 5.020 kg Lifting capacity: 3.500 kg Fork dimensions: 1.200 x 1.150 mm - Lifting capacity: 3500kg - Lifting height: 3700mm - Maximum fork width: 1150mm - Number of wheels: 4 Wheels - Overhead clearance: 2600mm - Attachment: Fork positioner, Side-shift - Options: Work lights, Verwarming, Full cabin - Fork length: 1200mm - Free lift: 0mm - Mast: Duplex - Year: 2016 Dcelnewfpqvo Nu Hujg - Documentation available: No - CE mark available: Yes - Serial number: H2X393G03206 - Operating hours: 11339 - Drive: LPG - Transport dimensions: 2900mm x 1250mm x 2600mm (l x w x h) - Transport weight [kg]: 5020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: ready for operation (used), Year of construction: 1997, operating hours: 63,800 h, General Data Machine weight 20500 kg Additional Equipment Rotary Indexing Table: Part Accuracy: ±3 arc seconds / Max. Clamping Weight: 800 daN (center) / Max. Tangential Torque: 20000 Nm (locked) / Max. Tilting Torque: 18000 Nm (locked) Rotary Indexing Table: Part Accuracy: ±3 arc seconds / Max. Clamping Weight: 800 daN (center) / Max. Tangential Torque: 20000 Nm (locked) / Max. Tilting Torque: 18000 Nm (locked) Main Spindle: Speed Range: 45-6000 rpm (infinitely variable) / Drive Power: 36 kW (from 500 rpm, 40 % ED) / Max. Torque: 688 Nm (40 % ED) / Feed Speed: Up to 24000 mm/min / Feed Forces: X/Y-axis 15000 N, Z-axis 20000 N This 4-axis HELLER MCS-H 250 was manufactured in 1997. A robust horizontal machining centre, it offers reliable performance for diverse machining needs. Ideal for those seeking advanced machining capabilities. Contact us for more information about this machine. Application Types Dceln Nu Hswgf Dzoueg Milling

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Dceln Nu Hewg Smvoueg Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: used, Year of construction: 2013, operating hours: 12,399 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, fork length: 1,150 mm, total height: 2,900 mm, total length: 2,000 mm, total width: 1,100 mm, color: other, Empty weight: 3.355 kg Lifting capacity: 2.000 kg Fork dimensions: 1.150 x 0 mm - Lifting capacity: 2000kg - Lifting height: 4670mm - Maximum fork width: 0mm - Number of wheels: 4 Wheels - Overhead clearance: 2900mm - Attachment: Side-shift - Options: Work lights, Camera - Fork length: 1150mm - Free lift: 0mm - Mast: Duplex - Year: 2013 - Documentation available: No - Operating hours: 12399 - Drive: LPG - Transport dimensions: 2000mm x 1100mm x 2900mm (l x w x h) - Transport weight [kg]: 3355kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Djljwfpmdon Nu Huecg Tess van den Boom

Condition: ready for operation (used), Year of construction: 2000, operating hours: 65,550 h, General Data Machine weight 20500 kg Additional Equipment Pallet Changer: Pallet Size: 500 x 630 mm (DIN 55201-A1) / Fastening: 33 x M12 screws Dcoln Nu Howgf D Ujueg Tool Magazine: 3 cassette slots + 1 set-up slot / Tool Holder: SK 50 / Max Tool Diameter: 100 mm (occupied) / 270 mm (with free space) / Max Tool Length: 450 mm / Max Tool Weight: 25 daN This 4-axis HELLER MCS-H 250 was manufactured in 2000. Ideal for precision machining, this horizontal machining centre offers robust construction and reliability. Consider the opportunity to buy this HELLER MCS-H 250 horizontal machining centre. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 2017, operating hours: 15,418 h, lifting height: 4,350 mm, fuel type: gas, fork length: 1,000 mm, total height: 210 mm, total length: 240 mm, total width: 120 mm, color: other, Empty weight: 3.820 kg Lifting capacity: 2.000 kg Fork dimensions: 1.000 x 950 mm - Lifting capacity: 2000kg - Lifting height: 4350mm - Maximum fork width: 950mm - Number of wheels: 4 Wheels - Overhead clearance: 2750mm - Attachment: Side-shift - Fork length: 1000mm - Year: 2017 - Documentation available: No - Serial number: H2.0FT - Operating hours: 15418 - Drive: LPG - Transport dimensions: 240mm x 120mm x 210mm (l x w x h) - Transport weight [kg]: 3820kg - Transport packages [pcs.]: 1 Deln Nu Hjwfpkpsujcg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2013, operating hours: 12,375 h, lifting height: 4,600 mm, fuel type: gas, mast type: duplex, fork length: 1,150 mm, total height: 2,900 mm, total length: 2,000 mm, total width: 1,100 mm, color: other, Empty weight: 3.350 kg Lifting capacity: 2.000 kg Fork dimensions: 1.150 x 0 mm - Lifting capacity: 2000kg - Lifting height: 4600mm - Maximum fork width: 0mm - Number of wheels: 4 Wheels - Overhead clearance: 2900mm - Attachment: Side-shift - Options: Camera, Work lights - Fork length: 1150mm Dolowfpc Esn Nu Huscg - Free lift: 0mm - Mast: Duplex - Year: 2013 - Documentation available: No - CE mark available: Yes - Operating hours: 12375 - Drive: LPG - Transport dimensions: 2000mm x 1100mm x 2900mm (l x w x h) - Transport weight [kg]: 3350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom