Used Pegas Gonda 250X315 Shi-Lr for sale (25,665)

Condition: good (used), Year of construction: 2007, Elma Parts Washer, Model LRS700-VTRLS3 Mfd. 2007 Precision Stainless Steel, Ultrasonic, Colisvvbk Dekhw Ijgt Conveyor Type, With 7 wash tanks Vacuum dryer Precision ultrasonic cleaning machine from washing laser and high vacuum parts with oil and particle-free requirements Material Compatibility: Materials: Aluminum, copper, stainless steel. Various geometries and weights with a maximum batch weight of 85 kg. Cleaning Items: Components/parts are mounted and clamped inside washer system baskets (dimensions: 450 x 632 x 500 mm) Contamination & Cleaning Result: Contamination: Residues from processing emulsions and other manufacturing residues. Cleaning Result: Components are required to be free of oil, abrasions, detergent residues, and dry, as confirmed by residual dirt analysis. Batch Weight: Maximum: 85 kg. Cycle Time: Variable cycle time based on testing, with a standard of approximately 6 minutes. Complex parts may require extended drying time. Under Power in a clean room

Year of construction: 2015, Condition: used, New: No Field of application: Freight transport Serial number: 2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18864 Cgeliovgyhijkhw Ijt Specifications: - 2015 model - 13 m3 - Weight: 2300 Kg - Spreader - Ready for delivery Description: Spreader of 13 m3 for sale. There is some rust on the box. Ready for delivery Own weight: 2300

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used for shelf spacing: 200 mm Total length: approx. 260 mm Cjlikhewhkbzow Iegt U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.250 kg | each includes: 2x screws M10 x 35 mm 2x nuts M10 2x washers M20 Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 Cslsvbgtneikhw Isgt operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing Cgjljwhp Dzjikhw Iet of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 04/2017, emission class: euro6, color: green, number of seats: 3, Year of construction: 2017, total length: 5,926 mm, total width: 1,993 mm, total height: 2,780 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Quickly & easily contact our sales consultant Internal ID number: [ 2573 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * German vehicle * 2nd owner * Regularly serviced * Euro 6 standard * Accident-free * High roof + long wheelbase * 4x4 all-wheel drive * Raised vehicle * Automatic transmission * rre Cgolikhwswhibgo Ist * Auxiliary heating * Cruise control * Lane keeping assist * Blind spot assist * Trailer hitch * Automatic climate control * Bluetooth multimedia function * Multifunction steering wheel * and much more... * Special features: Storage in the driver's cab roof lining, passenger side airbag, hill start assist, 13-pin trailer socket, equipment package: Cabin Comfort, equipment package: Driver Comfort, exterior mirrors without integrated indicators, outside temperature display, front side indicators, ceiling light in the cargo area, driver assistance system: collision warning system with braking function (Collision Prevention Assist), windows for rear doors / tailgate with wiper / washer system, 180 A generator, heated rear window, fuel tank: main tank 100 Ltr., cargo area partition with window, cross member with integrated step, inside rear view mirror, seats in the driver's cab: double passenger seat, seats in the driver's cab: double passenger seat with folding backrests, seats in the driver's cab: heated passenger seat, lane package, rear stabilizer, reinforced front stabilizer, fuel level sender for additional heating, heat-insulating glazing (windscreen with band filter above)Other equipment: 3rd brake light, adaptive brake light, driver's side airbag, washer fluid level indicator, electric exterior mirrors. Adjustable and heated, both exterior mirrors with integrated turn signals, brake assist, braking system with ABS+ASR, roof lining in the driver's cab, lockable glove compartment, rear door (opening angle 180 degrees), body/structure: high-capacity box, child safety lock, load anchors/lashing eyes, headlight range control, model update, 2.1 liter - 120 kW CDI CAT engine, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 emissions standard, sliding door for the cargo/passenger compartment on the right, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, maintenance interval display Assyst, permissible gross vehicle weight 3.50 t ---- Looking for leasing or financing? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: good (used), Year of construction: 2019, 10 bars. 75kW. Safety valve has been removed (see picture N°6 inside). We are trying to recover that safety valves, buyer must assume we haven't found it back. design Pressure in Bars: 10 Weight in kg: 1420 Cjlikhewfc T Row Iegt

Year of construction: 2014, Condition: used, Field of application: Freight transport Serial number: 2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18861 Specifications: - 2014 model - 13 m3 - Weight: 2300 Kg - Spreader - Ready for delivery Description: Spreader of 13 m3 for sale. There is some rust on the box. Ready for delivery Own weight: 2300 Cjlikhwovgxmwj Isgt

Condition: used, mileage: 532,212 km, power: 290 kW (394.29 HP), first registration: 10/2013, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, next inspection (TÜV): 08/2025, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, navigation system, KEMPF 3-way tipper body, 800 mm aluminum side walls, standing area behind the cab, hydraulic trailer connection, Duo-Matic brake connection, ABS, engine brake, all-wheel drive, differential locks, navigation system, multifunction steering wheel, air conditioning, driver's comfort suspension seat, heated and electrically adjustable exterior mirrors, electric windows on the driver and passenger doors, roof hatch, fog lights, 2 rotating beacons, ALCOA aluminum rims, air suspension with rear axle lifting and lowering device, vehicle can be painted and/or lettered with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle can be painted and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. Cslikhjwhh Apsw Ijgt We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: excellent (used), Year of construction: 2020, Agfa Inca Onset X3 digital printer for rigid media Full automation Auttomation: Dual Hi-5 Robotic Arms Cjlikhwst St E Ue Iegt Color configuration: 6 colours (CMYKLcLm) Manufacturing year: 2020 RIP: included Print head status: perefct One Platform. Infinite Potential - Capable of printing at up to a blistering 900m2 /hr* (equivalent to 180 full-bed sheets/hr), the Onset X3 sits at the pinnacle of productivity. With Onset X3, users of analogue screen printing lines can take the digital route, confident they can print long runs of high-quality print with superb consistency and reliability. The 14 channels feature three sets of CMYK plus white (W). Fujifilm Dimatix Printheads - Depending on whether applications are focused on quality or speed, one of two print Decomissioning transport and installation available upon request. Available January 2025 For further technical information please refer to enclosed data sheet from manufacturer.

Condition: excellent (used), Year of construction: 2017, Votech VLR-300 Bag filling line Serial: 283A01 2017, bulk bag filling line, 5Kg 10Kg 20Kg and 25Kg fills, running at 385 Bags per hour, starts with empty bag magazine, into a bag feed section, with Good Tech IPA1001-T-RH print and apply labeller, then onto bag opening section, then bag filling section, then bag air removal and compression, then heat sealing, then Meindertsma stitching unit, then a bag lay down section, then onto final roller section for levelling out the bag, with manuals and drawings ect Celewfg Rmoikhw Iogt

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 04/2017, emission class: euro6, color: green, number of seats: 3, Year of construction: 2017, total length: 5,926 mm, total width: 1,993 mm, total height: 2,780 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Quickly & easily contact our sales consultant Internal ID number: [ 2573 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * German vehicle * 2nd owner * Regularly serviced * Euro 6 standard * Accident-free * High roof + long wheelbase * 4x4 all-wheel drive * Raised vehicle * Automatic transmission * rre * Auxiliary heating * Cruise control * Lane keeping assist * Blind spot assist * Trailer hitch * Automatic climate control * Bluetooth multimedia function * Multifunction steering wheel Cgslikewhibajhw Iot * and much more... * Special features: Storage in the driver's cab roof lining, passenger side airbag, hill start assist, 13-pin trailer socket, equipment package: Cabin Comfort, equipment package: Driver Comfort, exterior mirrors without integrated indicators, outside temperature display, front side indicators, ceiling light in the cargo area, driver assistance system: collision warning system with braking function (Collision Prevention Assist), windows for rear doors / tailgate with wiper / washer system, 180 A generator, heated rear window, fuel tank: main tank 100 Ltr., cargo area partition with window, cross member with integrated step, inside rear view mirror, seats in the driver's cab: double passenger seat, seats in the driver's cab: double passenger seat with folding backrests, seats in the driver's cab: heated passenger seat, lane package, rear stabilizer, reinforced front stabilizer, fuel level sender for additional heating, heat-insulating glazing (windscreen with band filter above)Other equipment: 3rd brake light, adaptive brake light, driver's side airbag, washer fluid level indicator, electric exterior mirrors. Adjustable and heated, both exterior mirrors with integrated turn signals, brake assist, braking system with ABS+ASR, roof lining in the driver's cab, lockable glove compartment, rear door (opening angle 180 degrees), body/structure: high-capacity box, child safety lock, load anchors/lashing eyes, headlight range control, model update, 2.1 liter - 120 kW CDI CAT engine, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 emissions standard, sliding door for the cargo/passenger compartment on the right, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, maintenance interval display Assyst, permissible gross vehicle weight 3.50 t ---- Looking for leasing or financing? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: used, mileage: 341,999 km, power: 397 kW (539.77 HP), first registration: 02/2022, overall weight: 9,730 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, ID: 2923-375483 All our vehicles and the latest offers - Features I-See Predictive Cruise Control. Map based topography information. FH Globetrotter XL sleeper cab. 2 x 210 Ah - AGM Absorbent Glass-fibre Material type. Starter battery box on LH side when dual batt system. D13K540 diesel engine, 540hp, 2600Nm SCR and EGR. I-Shift Automated 12-speed - GCW 60 tons. I-Shift manual gear shift available in automatic mode incl kickdown function. Gearbox mounted retarder. Gearbox oil cooler - Basic water to oil. Driver comfort Fully electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Electrical window lift, auto up/down driver side, el operated on passenger side. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - air to air. 33 liter under bunk mounted refrigerator with freezer and deviders. Technical specifications Continental VDO 4.0 smart tachograph. Front tires 315/70 R22.5. Rear tires 315/70 R22.5. Jost JSK 37 cast iron fixed fifth wheel. Wheelbase 3200 mm. Left 700 liter aluminum 710 mm high D-shaped diesel tank with two steps. AdBlue tank 65l behind/under cab on right hand side. Right 365 liter aluminum 710 mm high D-shaped diesel tank. Road speed limiter setting 90 km/h. Technology Vehicle assistance service enabled, with voice channel. Fleet Management System gateway, preparation kit. Assistance switch and microphone, Volvo Action Service (VAS). Exterior LED headlamps. Head lamp asymmetry right, for LHD roads. V-shaped daytime running lights. Front fog lights - white. Cgsljv E Dc Ijikhw Iet

Condition: used, Year of construction: 2007, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19692 Specifications: - Model year: 2007 - Engine hours: 6060 hours - Hammer hours: 2496 hours - Weight: 14,900 kg - Machine width: 241 cm - Belt width: 30 cm - Central lubrication - Straight grinder - Chassis (see pictures) - Compressor - Wear parts included - Hammer has been repacked every 400 hours - The engine has had an oil change and filter change every 250 hours - Carousel - Radio control - Winkelm gauge - Meter gauge - Diesel heater - Ready for delivery Description: We have for sale a 2007 Atlas Copco D7 Drilling Rig , which has been well maintained and is in working order. The machine comes with a significant stock of wear parts and filters, and the owner has carried out regular oil changes on the engine every 250 hours and on the hammer every 400 hours. The rig is a bit slow to start, but the owner lets it run with the diesel heater for 15-20 minutes before starting, and then it starts easily. The idler wheel on the left side is a bit worn and needs to be replaced, and there is also a need to replace some hoses on the vacuum cleaner. The rig is from 2007, so some errors and defects may occur, and some expense will be required to get it back in top condition. However, it is ready for delivery and use. Cgjlijvyf Nlekhw Iet Total Weight: 14900 Width: 241

Condition: used, mileage: 532,212 km, power: 290 kW (394.29 HP), first registration: 10/2013, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, next inspection (TÜV): 08/2025, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, navigation system, KEMPF 3-way tipper body, 800 mm aluminum side walls, standing area behind the cab, hydraulic trailer connection, Duo-Matic brake connection, ABS, engine brake, all-wheel drive, differential locks, navigation system, multifunction steering wheel, air conditioning, driver's comfort suspension seat, heated and electrically adjustable exterior mirrors, electric windows on the driver and passenger doors, roof hatch, fog lights, 2 rotating beacons, ALCOA aluminum rims, air suspension with rear axle lifting and lowering device, vehicle can be painted and/or lettered with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle can be painted and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. Cgoljwhh Aijikhw Iet We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: new, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm Cgjliksu Uu U Uehw Iot - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2022, Votech VLR-B Bag filling line Serial: 681A01 2022, bulk bag filling line, 5Kg 10Kg 20Kg and 25Kg fills, designed for 320Bags per hour, starts with empty bag magazine, into a bag feed section, with Good Tech IPA1001-T-RH print and apply labeller, then onto bag opening section, then bag filling section, then bag air removal and compression, then heat sealing, then Fishbein stitching unit, then a bag lay down section, then onto final section for levelling out the bag, with manuals drawings ect Celikhwewfg Ilj Ijgt

Condition: ready for operation (used), Year of construction: 2020, This 6-axis Universal Robots UR-3e was manufactured in 2020, offering advanced automation solutions with its versatile robot arm design. Ideal for tasks requiring precision and flexibility in various industries. Consider the opportunity to buy this Universal Robots UR-3e robot arm. Contact us for more information. Application Types Robotics Cgelewg Id Rsikhw Iet

Condition: used, mileage: 389,292 km, power: 397 kW (539.77 HP), first registration: 09/2022, overall weight: 9,730 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, ID: 806-399025 All our vehicles and the latest offers - Features I-See Predictive Cruise Control. Map based topography information. FH Globetrotter XL sleeper cab. 2 x 210 Ah - AGM Absorbent Glass-fibre Material type. Starter battery box on LH side when dual batt system. D13K540 diesel engine, 540hp, 2600Nm SCR and EGR. I-Shift Automated 12-speed - GCW 60 tons. I-Shift manual gear shift available in automatic mode incl kickdown function. Gearbox mounted retarder. Gearbox oil cooler - Basic water to oil. Driver comfort Fully electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Electrical window lift, auto up/down driver side, el operated on passenger side. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - air to air. 33 liter under bunk mounted refrigerator with freezer and deviders. Technical specifications Continental VDO 4.0 smart tachograph. Front tires 315/70 R22.5. Rear tires 315/70 R22.5. Jost JSK 37 cast iron fixed fifth wheel. Wheelbase 3200 mm. Left 700 liter aluminum 710 mm high D-shaped diesel tank with two steps. AdBlue tank 65l behind/under cab on right hand side. Right 365 liter aluminum 710 mm high D-shaped diesel tank. Road speed limiter setting 90 km/h. Technology Vehicle assistance service enabled, with voice channel. Fleet Management System gateway, preparation kit. Assistance switch and microphone, Volvo Action Service (VAS). Exterior LED headlamps. Head lamp asymmetry right, for LHD roads. V-shaped daytime running lights. Front fog lights - white. Celiewf T Hhokhw Iogt

Condition: used, Year of construction: 2015, Field of application: Construction Serial number: 11-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17783 Specifications AMV: - 2015 model - Not certified - Engine hours: 2297 hours - Transmission hours: 688 hours - compressor hours: 8056 hours - Pump hours: pump V: 8878t- Pump S: 9170t- Pump H 8788t - Percussion hours: stroke v: 2950t-stroke s: 3142t- stroke H 2984t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW Cgelsvg Rcdeikhw Ijt - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery

Condition: used, mileage: 217,862 km, power: 213 kW (289.60 HP), first registration: 07/2010, overall weight: 15,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, loading space volume: 9 m³, total width: 2,420 mm, total height: 3,170 mm, Equipment: ABS, parking heater, Schwingenschlögel tank structure for fuel, capacity 8700 liters, 2 chambers, 1st chamber 5400 liters, 2nd chamber 3300 liters, bottom filling, SENING pump system for moderate emptying, output: empty hose 500 l/h, hose reel with approx. 50 m tank hose with nozzle for vehicle refueling, output 300 l/h, measuring device: Schwingenschlögel Petrodat 30021, gas measuring device: GMV 80F / FpH, receipt printer, ADR type class FL, AT, all-wheel drive, differential locks, ABS, cruise control, reversing camera, engine brake, roof air conditioning, auxiliary heating, exterior mirrors heated and electrically adjustable, electric. Driver and passenger door windows, driver's comfort suspension seat, battery isolator switch, rotating beacon, stainless steel toolbox, air suspension with rear axle lift/lower mechanism, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. Cjlikjwhhzrehw Isgt We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, mileage: 349,509 km, power: 397 kW (539.77 HP), first registration: 09/2022, overall weight: 9,730 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, ID: 2067-400257 All our vehicles and the latest offers - Features I-See Predictive Cruise Control. Map based topography information. FH Globetrotter XL sleeper cab. 2 x 210 Ah - AGM Absorbent Glass-fibre Material type. Starter battery box on LH side when dual batt system. D13K540 diesel engine, 540hp, 2600Nm SCR and EGR. I-Shift Automated 12-speed - GCW 60 tons. I-Shift manual gear shift available in automatic mode incl kickdown function. Gearbox mounted retarder. Gearbox oil cooler - Basic water to oil. Driver comfort Fully electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Electrical window lift, auto up/down driver side, el operated on passenger side. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - air to air. 33 liter under bunk mounted refrigerator with freezer and deviders. Technical specifications Continental VDO 4.0 smart tachograph. Front tires 315/70 R22.5. Rear tires 315/70 R22.5. Jost JSK 37 cast iron fixed fifth wheel. Wheelbase 3200 mm. Left 700 liter aluminum 710 mm high D-shaped diesel tank with two steps. AdBlue tank 65l behind/under cab on right hand side. Right 365 liter aluminum 710 mm high D-shaped diesel tank. Road speed limiter setting 90 km/h. Technology Vehicle assistance service enabled, with voice channel. Fleet Management System gateway, preparation kit. Assistance switch and microphone, Volvo Action Service (VAS). Exterior LED headlamps. Head lamp asymmetry right, for LHD roads. V-shaped daytime running lights. Front fog lights - white. Cjlikswf T E Rshw Isgt

Condition: used, Year of construction: 2014, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17779 Cgolikevg Nbljhw Ijt Specifications AMV: - 2014 model - Not certified - Engine hours: 2097 h - Transmission hours: 612 hours - Compressor hours: 10999 hours - Pump hours: pump V: 10840t- Pump S: 11232t- Pump H 10736t - Percussion hours: stroke v: 3923t-stroke s: 3811t- stroke H 3770t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery.

Condition: used, Year of construction: 2021, operating hours: 158 h, Field of application: Construction Serial number: SY0027cc3xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18111 Specifications: - 2021 model - 15.2 kW - 2760 kg Cjlikhsvg Nuxsw Iegt - 158 hours - Extra hydraulics - Machine width: 155 cm - Belt width: 30 cm - Grader blade - S40 attachment - Quick attachment - Narrow bucket - Hydraulic sanding bucket - Tooth bucket - Pinch - Service history - Light - Climate - Radio - Ready for delivery Description: The machine can be put to work straight away. Everything works as it should according to the owner and it comes with a lot of equipment. Ready for delivery. Hours: 158 Total Weight: 2760 Width: 155 Kw: 15,2

Year of construction: 2010, Condition: used, Mileage: 190.000 km Field of application: Freight transport Serial number: WMAN13ZZ9AY24xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19017 Specifications: - 2010 model - Km: approx. 190,000 - 4x2 - 2015 Euroskilt cushion - C1 car - Gear: manual - Disc brakes - Tires (see pictures) - Wheels with studded winter wheels (see pictures) - 2 year check on the printer - Wheelbase: 306 cm - Tool box - AC/climate - Radio - 2 seats - Delivery by agreement Description: Cjlijvgx S Tjkhw Iogt MAN TGL 8.220 cushion truck. It is a Euroskilt cushion from 2015. The truck has traveled about 190,000 km Comes with studded winter wheels. Delivery by agreement. Km: 190000 HK: 220 Technical approved: Yes EU-approved until: 16.09.2025 Own weight: 5180 Total Weight: 7500 Payload: 2245 Width: 238 Length: 567 Euro: 5 Gearbox: Manual