Used Gesan Dps 30 for sale (59,726)

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, pressing force: 220 t, bending length: 3,000 mm, stroke distance: 180 mm, TECHNICAL DETAILS Pressure: max. 220 t Folding length: max. 3,000 mm Stroke: max. 180 mm Control: Delem DA 58 Controlled axes: y1, y2, x, r, z1, z2 Tool holder: Amada-Promecam Fsb Hcou S N Htj I A Tepg MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 12,000 kg Dimensions: 3,660 × 2,380 × 2,800 mm EQUIPMENT - Safety doors behind the machine - 2-hand foot switch

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, warranty duration: 24 months, Multifrequency ultrasonic cleaning tabletop unit, perfect for cleaning mechanical cleaning of mechanical components, watches, glasses, jewelry, medical medical devices and much more. L-30 PLUS 30 liters 28/40KHz 600W / 220 Volt Basket dimensions 460 x 260 x 150 mm Fpjb Hc I Aerwpgfo Tsg From stock CH- St Gallen immediately available also smaller models! Various sizes from stock! High-performance ultrasonic component Precise heating elements for constant bath temperature LED control Constant power and frequency for better ultrasonic density, which is particularly suitable for cleaning high-precision parts

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, Functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1.63 m³/h, type of cooling: water, input voltage: 400 V, operating temperature: 201 °C, frequency: 50 Hz, motor voltage: 400 V, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, type of motor: electric motor, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 screw compressors Were used to pneumatically unload railroad cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via shell and tube heat exchangers. Year of construction: 1998 Dimensions: Length: 2800mm Width: 1150mm Height: 1770mm Weight: approx. 2750kg Operating hours: Fpebjrkpp Ho Hc I A Tsg Compressor 1: 28109 hours Compressor 2: 28222 hours Compressor 4: 28973 hours Compressor 5: 26645 hours Regular service was carried out by a specialist service company! Have not been operated since 2019. Have been in a dry and heated location since then.

Condition: excellent (used), Functionality: fully functional, power: 55.4 kW (75.32 HP), fuel type: diesel, color: yellow, tire size: 405/70 R 20, shovel volume: 1 m³, Year of construction: 2018, operating hours: 3,190 h, Equipment: additional headlights, cabin, standard shovel, Manufacturer: Volvo Type: L 30 G Year of construction: 2018 Hours: 3.190 Engine: Volvo D 3.3H Power: 55,4 kW Tires: 405/70 R 20 Bucket: 1.0 m³ standard with cutting edge Equipment: Quick coupler Pallet fork StVZO equipment Work lights Sweeper preparation Fpsb Hju S E U Hoc I A Teg Machine ready for immediate use. Subject to errors and prior sale.

Condition: good (used), min width of the middle prism after cutting 80mm max width of middle prism after cutting 280mm electric saw advance diameter of spindles 70mm max diameter of circular saw blade 800mm Fpjb Hc I Aou Evque Tjg max cutting height 260mm max number of circular saws 2 pcs length of feeding track 5000mm engine power 2x15kW

Condition: new, Functionality: fully functional, Year of construction: 2024, Return roller 108,0/30/ 600/ 608/ 626/SW22 Price for one 87 €/pc Totally 27 pieces in store Feb Hcoual Ntj I A Tspg

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 7,771 h, load capacity: 3,000 kg, lifting height: 3,655 mm, free lift: 150 mm, mast type: duplex, construction height: 2,450 mm, power: 39 kW (53.03 HP), fork length: 1,200 mm, engine type: 4-Zyl. VW, drive type: Treibgas, LPG forklift Load center: 500 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Description: Sideshift, Fsb Hcotzg D Ns I A Tjpg 3rd valve, rear working lights, front working lights, heating, full cab, LED,

Condition: excellent (used), Year of construction: 2019, operating hours: 3,500 h, Functionality: fully functional, fuel: diesel, Ditch Witch JT30 from 2019, 3500mtg, complete with 1 box of 150m poles Fpob Hcevkucco I A Teg

Condition: used, Year of construction: 2022, NEW MACHINE OF OWN PRODUCTION - NATIONAL INDUSTRY PLAN 4.0 MACHINE COMPONABLE ON REQUEST ACCORDING TO YOUR PRODUCTION NEEDS Numerical control machining center for automatic processing of standard (45 °) or reversible (90 °) frames Numerical control with programming on industrial PC 15 ”Touch screen - Windows 10 environment and complete NP-WOOD Software of all the parametric macros for the most common processes (straight cuts, 45 ° cuts, counter plates, hinges concealed, pivot hinges etc ...) The machine is completed by the relative loading and unloading benches. The loading bench is complete with motorized belts, for the automatic feeding of the machine. A special capture and locking unit, equipped with 4 pneumatic clamps, slides along the longitudinal axis (X) and firmly captures the first piece arriving from the loader desk, aligns it and then accompanies it through all work groups, without ever unlocking it, until the program is completed and then up to the unloading bench. The profile is aligned with the stop upwards (valuable side) and towards the stop side. The finished pieces, at the end of the cycle, are unloaded on a series of idle rollers and accumulate in descent. Groups present on the machine: Base + CN vice carriage (X axis) · Loading bench with motorized belts and retractable rollers for the alignment of the piece in the locking position . Blocking and handling unit of the piece by means of n. 4 pneumatic clamps (pliers) with automatic positioning according to the size of the workpiece. · Cutting unit + 45 ° kw 5.5 right side · Cutting unit -45 ° kw 5.5 left side · Cutting unit 90 ° kw 5.5 for straight cut · Group of holes + 45 ° with n. 3 spindles with 32 mm center distance for right-hand drilling · Hole group -45 ° with n. 3 spindles with 32 mm center distance for left-hand drilling · 90 ° vertical hole group (reversible frames) with n. 3 spindles with 32 mm center distance for cross-beam drilling REVERSIBLE · Group of holes horizontal / horizontal (reversible uprights) with n. 3 spindles with 32 mm center distance for drilling on the UPRIGHTS . Automatic anubating unit with loader . Automatic anubating unit with vibrating magazine 2-axis NC milling unit (Y-Z) kw 3.8 2-axis NC milling unit (Y-Z) kw 3.8 · Unloading bench with idle rollers Optional for the anuba group, the vibration warehouse All electrospindles are managed by Inverters Advantages of the work system: * Maximum precision, due to the movement of the panel by means of pneumatic clamps up to the moment of completion of the production process * Great sturdiness of all work groups which are mounted on fixed bearing structures. This guarantees quality during processing thanks to the absence of vibrations. * The cutting groups act with electric transversal movement, while the milling group is equipped with axes controlled by vertical (Z) and transverse (Y) NC. WORKING DIMENSIONS * Max profile width on bench 2300 mm Fobou Hbhuj Hc I A Tjpg * max profile width 230 mm * min profile width 60 mm AVERAGE PRODUCTIVITY considering the complete frame with anuba processing - 180 complete frames per shift of about 7 hours

Condition: excellent (used), OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Payload: 6 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Fjb Hc Isuf N Dfj A Topg Loading area: Size approx. 4100 x 2100 mm, load height approx. 560 mm, with screen printing plates Deflectors on the front sides of the frame Steering: Four-wheel Ackermann steering, drawbar can be raised, cannot be repositioned or removed, Drawbar safety device according to UVV Chassis: Both axles steered, wheels with solid rubber tires approx. 425 x 150 mm, wheel hubs with tapered roller bearings and tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Miscellaneous: - Collision protection on the frame ends made of drop-shaped half shells. - All-round anti-slip protection approx. 25 mm high - Side underride guard at diagonal bar height - Pin coupling with captive pin, pin spring-loaded Dm 30, on the rear side - Double-acting wheel chock with chain - Two reflectors at the rear - prepared for roof mounting

Year of construction: 2003, Condition: excellent (used), control: Ultimax tool taper: SK40 table size: 1020 x 510 mm travel: x-760, y-510, z-610 mm spindle speed: 10000 rpm 24 fold tool changer internal cooling accessories: 2 hydrl. vices, div. tool holder Fpjb Hc Ieitk Ncj A Teg

Condition: used, Functionality: fully functional, Year of construction: 2019, load capacity: 3,000 kg, construction width: 1,200 mm, Fork positioner ISO class: ISO class 3 = 2,500 - 4,999 kg Fsb Hc I Aot S N R Te Tjpg Technical condition: good Description: Capacity 3000 kg Year 2019 Sideshift ISO 3A (51 cm) Opening range 400-1200 mm Width 1200 mm ID OS632

Condition: used, Functionality: fully functional, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,830 mm, free lift: 1,445 mm, fuel type: electric, mast type: triplex, construction height: 2,230 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Rear tires type: Superelastic Fjbjqxk Hte Hc I A Topg Battery Volt: 80V Battery Ah: 625Ah Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, safety light, LED,

Year of construction: 1989, Condition: reconditioned (used), *originally pre-evacuation filler *converted to double pre-evacuation *with 30 filling valves and 10 head crown corker *including vacuum pump *In this filler 1,800 working hours were invested, that means everything was overhauled including a new ball bearing slewing ring. So the filler is in a really perfect top condition. *equipped for one bottle type (250ml) can be converted to up to 500ml *max 265mm heigh/85mm diameter Fpjb Hconi U Ruo I A Tjg *bottle conveyors and bottle lifter + corrugated box preparation unit Lantech can be discussed for additional cost.

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y Fpeb Hcsux Si Hs I A Tsg - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, The machine was completely measured according to the new machine IB protocol. TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 2,000 mm Y-axis: 600 mm Z-axis: 700 mm Work table Table dimensions: 2,200 x 600 mm Fpob Hju U Iykjc I A Teg Spindle Speed range: 20 - 15,000 rpm Interface: SK40 Tool system Tool changer: 48-fold EQUIPMENT - Partition wall preparation - Partition wall for pendulum machining - Direct distance measuring systems - Complete cabin (closed at the top)

Condition: good (used), Year of construction: 2018, - Control unit: KR C4 - Weight: 665kg Fpsb Hcotq Uvas I A Tog - Load capacity: 30kg

Condition: good (used), Year of construction: 2010, operating hours: 4,500 h, Functionality: fully functional, machine/vehicle number: 3754-05-10, The CMB ERL-30-EXP packaging equipment is in good working condition. It was purchased new from the manufacturer in Spain. It is sold as shown in the pictures. Delivery preparation and loading into the truck is included in the price. Transport is the responsibility of the buyer. Fpob Hc I Ajvuqt Se Teg

Year of construction: 2014, Condition: like new (used), Matec 30 HVK Working range X 1300 (1500) mm Working range Y 600 (800) mm Working range Z vert. 675 (975) / hor. 800 (1100 at Y=800) mm distance spindle nose / table vert. 0-675 (975) / hor. 175-975 (1275) mm Working spindle - DIN 69871 (HSK 63A) 15.000 rpm drive power 16 (30) kw at 40% ED Torque max. 100 (190) Nm at 40% ED rapid traverse 30 (48/100 with linear drive) m / min. Machine weight 15 tons Control Siemens Fob Hjl D Nc Tec I A Tjpg

Condition: good (used), Year of construction: 2015, Functionality: fully functional, PSYSTEM pellet PRESS automated with the refiner, its hydraulic control unit and pellet unloading auger. Used and overhauled by the manufacturer. Production capacity up to 350 kg/hour, starting from sawdust and fine wood chips, maximum humidity 13-14%. Coupled motor 30 kW, absorption depends on actual production. For example, with the hourly production of 250 kg of pellets per hour, electricity consumption will be approximately 25 kWh. It can be integrated into the customized system based on the needs and characteristics of the material and completed with: 1) Mini silo for collecting the raw material or a container of various volumes (depending on the autonomy we want to obtain and the available budget). 2) Sorting machine (if there are metal contaminants in the waste). Fpjb Hsvfc Nmec I A Tog 3) Additional refiner for waste with dimensions greater than G20 (20x20x5 mm) 4) Dryer for waste with humidity greater than 14% 5) Filter for dust recirculation (its capacity depends on the power of the dryer and productivity of the plant). 6) Hopper for pellet collection 7) Packaging system (manual, automatic…..)

Condition: used, diverse tool retainers SK 30 DIN 69871 Fpjb Hsbp Nthjc I A Tjg

Condition: used, Year of construction: 1993, Shredder brand Kara Fjb Hc I Ajtyim So Tspg type KV-2512-300-30 roller length: 1250 mm roller diameter: 300 mm sieve holes: ø 15 mm number of teeth: 24 tooth size: 30 x 30 x 15 mm size of the funnel: 1250 x 2700 mm dimensions approx. 5200 x 1900 x 2490 mm weight approx. 6000 kg incl. horizontal conveyors, approx. 12 meter, angled approx. 6 meter Can shred almost all wood types!

Year of construction: 2009, operating hours: 12,000 h, Condition: like new (used), The machine is in excellent condition and reliably cleans the exhaust air (even from several machines). thruput 2400m3 / hour. Feb Hefmy D Aec I A Tepg

Year of construction: 1999, Condition: used, machine/vehicle number: 1449, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 30KW - double exit - complete with triode ITL2 Fob Hc I Aot U Ia Es Tspg - sn 1449 - year 1999

Condition: used, Knurling attachment Quick 1/KF CNC VDI 30 L Fpsb Hc Iou Sk Tko A Tsg