Used Gesan Dps 30 for sale (59,767)

Condition: like new (used), Functionality: fully functional, overall weight: 2,430 kg, Year of construction: 2023, operating hours: 160 h, Vertical flat glass washing machine Passage height: 2000 mm (max. glass height: 2000 mm) Running direction: right to left Brushes: 3 pairs of brushes Low-e: Front brushes are for low-e glass (low-e capability) Transport distance: EL and AL 3000 mm (inlet and outlet transport each 3000 mm) Dolq Enaewc Abijvecg Glass transport height vertical: 520 mm from the floor Water tank underneath the machine: Cascade system, first tank heated Voltage: 400 V/50 Hz Connected power: 30 KW Total length with inlet and outlet: 8100 mm

Year of construction: 2003, Condition: ready for operation (used), X-axis: 650mm, y-axis: 600mm, z-axis: 500mm, max. spindle speed: 20-18,000 rpm, number of tool positions: 32, tool diameter: 90-125mm, max. tool length: 125mm, NC swivelling rotary table diameter: 630mm, rapid traverse: 45m/min, resolution of path measuring system: 0.0001mm, spindle power: 15kW, torque: 0.0001mm, max. tool length: 125mm, NC swivelling rotary table diameter: 630mm, rapid traverse: 45m/min, resolution of path measuring system: 0.0001mm, spindle power: 10/15kW, torque: 87/130Nm, tandem drive A-axis: 6m/s, compressed air connection: 6bar, control: Heidenhain iTNC 530, weight: approx. 12t. With tool breakage measurement, measuring probe, linear axes standard version, chip tray and other elements, new spindle head 2023. Delq Enowb E Sueavjcg

Condition: used, Year of construction: 2016, total length: 10,500 mm, front tire size: 250-15, rear tire size: 250-15, wheelbase: 8,000 mm, ground clearance: 250 mm, drive type: Kein Antrieb, load capacity: 14,000 kg, construction width: 2,600 mm, front tire type: Solideal, rear tire type: Solideal, Trailer Multi-Trans VAL 30 Drive No Drive Year built 2016 Lifting weight (kg) 14,000 Dcelqevztw He Enavog

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm Dcolq Esvvt Emenavsg turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3 steples U/min tailstock taper IS tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m The machine is currently in the technical department. Equipment: 3-jaw power chuck KITAKAWA Ø 250mm (without jaws) 4200 rpm. can be operated via 2-way foot switch *

Year of construction: 2023, Condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Dslq Enogazklsavocg All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 651 h, Year of manufacture: 2018 Field of application: Construction Drive: Track Empty weight: 3.400 kg CE mark: yes Reference number: 77 Dcsljway Uzeq Enavjg SEBA Litetrack 50-30. Year: 2018. Hours: 651. Weight: 3400 kg. CE machine. 21.5 KW. Radio Remote Control. Jaw crusher 500x300 mm. Capacity: 6-15 kub/h. UC: 80%. Dimmensions: L: 4550 mm. W: 1580 mm. H: 1950 mm. German machine! ID NR: 77. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, overall weight: 30,000 kg, maximum load weight: 20,540 kg, axle configuration: 2 axles, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,400 mm, loading space volume: 80 m³, first registration: 10/2006, total width: 2,600 mm, total height: 3,800 mm, Equipment: ABS, Refrigerated box body, 1 anchor rail for locking bars per side, plastic floor, CARRIER refrigeration unit type: Vector 1800, diesel-electric, BÄR tail lift type: BC 2000S4, max. lifting capacity 2000 kg, battery box for LBW, rear view camera, central lubrication system, ABS, EBS, "Mercedes" axle(s), last axle forced steered / TRIDEC steering, disc brake system, air suspension, JOST landing gear, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Djlqev Nukdj Enavocg Please contact us!

Condition: excellent (used), A special rotating center SK 30 for e.g., KAPP VAS 432 - SK 30 with M12 retraction thread (without cutout for drive cam) - Spindle, bearings, etc. according to ROTOR MK 3 HP-Line - 60° hollow center according to drawing - Max. concentricity deviation of the 60° hollow cone: 0.003 mm Dcelqewb Dq As Enavsg Price upon request. All technical information is subject to typographical errors/mistakes. Sale exclusively to EU countries.

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° Dcolqov Ip I Us Enaveg B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm Dcslq Enaewc A Snovsg workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: good (used), Year of construction: 2015, operating hours: 3,878 h, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, mileage: 3,878 km, lifting capacity: 3,000 kg, net weight: 5,500 kg, This TRIPLEX forklift from the STILL brand comes from 2015 and is in good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 6,040 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT and a FORK SPREADERDrive-through height of 2,725 mm;Forks 1,200 mm;The battery up to 2015 is equipped with an external charger and an automatic filling system;Make an appointment for a test drive;Watch the video on YouTubeFINANCIAL LEASE POSSIBLE, ask about the conditions Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Dcelq Enajvtm Shjvjg

Condition: used, overall weight: 37,000 kg, maximum load weight: 30,850 kg, axle configuration: 3 axles, first registration: 09/2005, Year of construction: 2005, Equipment: ABS, Manufacturer LAG Model 3 Akslet 30 Fod Tip Chassis Year 2005 Condition Good Serial Number YB49030035L017751 Ref. nr. 7737 Reg. date: 19-09-2005 Disc brake: ? ABS: ? Dcjlqsvn Dkkj Enavsg Rear axles: SAF Suspension: Air Tire Size: 385 / 65R22.5 Cover% left 30-50% Toolbox: ? Total weight: 37000 Kg Net weight: 6150 Kg Load capacity 30850 Kg

Year of construction: 1984, Condition: excellent (used), Robatech Roba 30 adhesive system. Delqjum Hufj Enavocg

Condition: good (used), Year of construction: 1990, Functionality: unexamined, machine/vehicle number: 1132, 30 stations Delq Eswc Un Ujnavecg

Condition: excellent (used), Year of construction: 1996, Hydraulic guillotine shear. Brand Gade 3050 x 6/8 mm Model CO 30/6 Useful cutting length: mm 3050 Maximum cutting thickness: mm 8 Dcslqsv S Ai Ts Enavjg Tank capacity 120 lt Motorized register 1000 mm Recess 500 mm Motorized blade gap Rear sheet metal evacuator CE machine Weight 8100 KG Year 1996 CE

Condition: used, Year of construction: 2024, operating hours: 210 h, fuel type: diesel, Field of application: Internal logistics Rental currency: EUR Please contact Jan De Lepeleer for more information Djljwaqx Dsq Enavocg

Condition: good (used), Year of construction: 1990, Functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components Dcelqsv Iv Sgo Enavog such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Höcker, radial fan chip extraction fan type L 30/220 -Volume flow: 4100 m³/h -Motor: Lammers 5.5 kW 1450 rpm -Connection input: Ø 220 mm -Connection output: Ø 220 mm Delov Ivlyoq Enavjcg -Base plate: 955 x 880 mm -Fan wheel: Ø 740 x 170 mm -Dimensions total: 955/880/H1075 mm -Weight: 264 kg

Condition: used, Functionality: fully functional, Year of construction: 1999, operating hours: 7,723 h, load capacity: 3,000 kg, lifting height: 5,550 mm, fuel type: electric, mast type: standard, construction height: 3,400 mm, drive type: Elektro, Electric 4-wheel forklift Fork width: 1100 mm Mast type: Standard Technical condition: normal Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Dceloukrg Ueq Enavjg Battery Ah: 775Ah Battery year of construction: 2005 Description: The device may be partially painted, workshop and UVV tested. Prices are available on request. Sideshift, 3rd valve, front work lights, full cab,

Condition: used, Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 019 113, total length: 16,000 mm, total width: 1,100 mm, total height: 1,700 mm, Manufacturer: JENOPTIK Technologie GmbH Type: JENOMIC P3/30 Year of manufacture: 1998 Multi-spindle machining center for radius grinding and polishing Speed indicators for each main spindle and eccentric spindle Rated voltage: 400 V 3/N/PE Frequency: 50 Hz Connected load: 8.5 kVA Dcelq Eowbfnionavsg

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Dimensions and weights Length ca.1725 mm width/depth ca.880 mm Weight ca.270 kg Dressing Chip removal max.4 mm Connection suction Suction port diameter thickness2 x 120 mm Delq Enekwhykjavjcg Thickness Working height min.3 mm Working height max.230 mm Chip removal max.4 mm Electrical data Power drive motor4 kW Supply voltage400 V Mains frequency50 Hz Planing cutterhead TypeTERSA Number of planing knives3 pcs Speed5200 min¯¹ Planing width max.300 mm Feed rate Speed7 m/min Availability: short term Storage location. Hochheim

Condition: used, Year of construction: 2008, operating hours: 6,673 h, Functionality: fully functional, machine/vehicle number: 764774, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, This is a KUKA KR 30-3 industrial robot Dcjlq Esrzaakenavjg Year of manufacture 2008 We are also happy to offer you this robot refurbished! The robot includes the following options: KUKA.USB LoadDataDetermination USB.menu

Condition: used, mileage: 258,039 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 01/2011, next inspection (TÜV): 03/2027, emission class: euro4, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * 2nd hand * Air conditioning * TÜV (German Technical Inspection) until 2027/3 * Roof rack * Tool racks are not included! Special equipment: Load compartment partition, radio preparation, 4 speakers, Cab seats: Double passenger seat (including automatic seat belt), Power outlet in the cargo/passenger compartment Additional equipment: Driver's side airbag, Anti-Slip Regulation (ASR), Wide-angle exterior mirrors, Colored turn signals integrated into the exterior mirrors, Rear wing doors without glass, Body/structure: Van, Fuel tank: 90 liters, Height-adjustable steering column (steering wheel), Engine: 2.2 liters - 74 kW HDi CAT, Wheelbase: 3000 mm, Sliding door in the cargo/passenger compartment on the right, Seat cover/upholstery: Fabric, Dyed bumpers Dolqowauwko Enavjcg

Condition: good (used), Year of construction: 2001, Radial fan, chip extraction fan, fan, extraction, chip blower, high-performance fan -Engine power: 30 kW -Speed: 1475 rpm -Volume flow: 23150 m³/h Dcjlq Ensv Iqrzoavjg -Total pressure: 2719 Pa -Connection input: Ø 550 mm -Connection output: Ø 550 mm -Dimensions: 905/1950/H1790 mm -Weight: 622 kg

Condition: used, Year of construction: 1967, Functionality: fully functional, total width: 32,050 mm, total height: 26,000 mm, Semi-gantry crane Manufacturer: Nöll Built in 1967 Rebuilt in 2009 Radio control Clearance width: 32,050 mm Lifting height: 26,000 mm From foundation. The crane was last serviced in June 2024. Annual maintenance. Of 78 inspection points, 4 were found to be defective. 1. The hoist rope has one broken wire and one kink. 2. The lighting in the power supply switch cabinet is defective. 3. The barrier on the bridge girder is broken. 4. The "Hoist Overload" indicator light is defective. Dsljwa Ubpoq Enavscg The crane is powered and can be demonstrated.