Used Nilfisk-Alto Floortec 560 B for sale (9,117)

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer Bsljv N U U Norav Abjwl - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 511981, number of spindles: 2, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Manufacturer: INDEX Machine type: G 200 Y/B Machine number: 511981 Year of manufacture: 2007 Generally overhauled: 2024/2025 Control: Siemens Sinumerik 840 D_pl, Version: 6.5 Drives: Siemens Simodrive 611 digital Specifications: Main spindle: Hollow clamping cylinder, 60 mm bore, with C-axis Counter spindle: Hollow clamping cylinder, 60 mm bore, with C-axis, coolant through and via the spindle, tailstock function with foot switch Cross slide 1: X, Z, Y, B, C axes, turret with 14 driven stations Cross slide 2: X, Z, C axes, turret with 14 driven stations Sliding hood: Manual Chip conveyor: Knoll chip conveyor incl. Maintenance switch Coolant system: 8 bar / 18 bar Bar loader: Unimag interface for bar loading magazine Gantry removal device with parts removal conveyor Belrov Rb U Esav Abewl Further information: Renewal of guideways X1, Z1, X2, Z2/Z4 Renewal of ball screw drive X1, Y1, Z1, X2, Z2/Z4 Renewal of cable carrier turrets 1 and 2, Z4 (including all cables, hydraulic and pneumatic hoses) Sealing Y/B axis Repair of turret head 1 and 2 (bearings, seal kit, etc.) New bearings for main spindle S4 including encoder and encoder wheel New hollow clamping cylinder S4 New bearings for counter spindle S3 including encoder and encoder wheel New hollow clamping cylinder S3 Repair of all axis motors by Siemens Renewal of all axis encoders (rod encoders, Glass scales) Replacement of safety glass for sliding door Replacement of control cabinet wiring including electromechanical components Delivery can be made shortly after receipt of order from the Nienhagen factory. This offer is subject to change without notice, availability, and prior sale. Payment terms: 100% upon order Commissioning will be charged separately.

Condition: used, Year of construction: 2003, KOLBUS Perfect Binding Line KM 410.B year 2003 Overview: ZU 841.B gathering machine KM 410.B perfect binder Configuration: ZU 841.B gathering machine - handfeeding one person - 21 stations with optical sheet control - 1 feeder for signatures with laps to be bound - 1 card gluer with NORDSON PROBLUE 4 hotmelt gluing unit - set up element - reject unit AS 841 to the left - transfer to the binder - BECKER air-center VARIAIR (year 2005) KM 410.B perfect binder - Copilot system with touch screen - 20 clamps - main milling station - 3 spine preparing units - without dust extraction system (machine was connected to a central dust extraction system) - interchangeable hotmelt spine gluing unit - ROBATECH ICS C160 premelter - interchangeable PUR nozzle spine gluing unit EP 48V (year 2008) - NORDSON DURADRUM DK 200 PUR premelter spine gluing unit (year 2008) - interchangeable hotmelt side gluing unit 3 mm - ROBATECH ICS C30 premelter - non-stop stream cover feeder NA 400.B with feeding conveyor - scoring station - 2 pressing stations - lay down device Technical specifications: Bolreu Edqvsav Abowl mechanical speed: up to 12.000 cycles/h size range max.: 510 x 290 x 65 mm size range max.: 510 x 305 x 20 mm size range min.: 105 x 100 x 3 mm

Condition: good (used), Year of construction: 1987, number of straightening rollers: 11, coil weight: 1,250 kg, material thickness: 3 mm, sheet thickness steel (max.): 3 mm, coil width: 300 mm, total height: 1,700 mm, sheet thickness (max.): 3 mm, load capacity: 1,250 kg, material width: 300 mm, overall weight: 1,250 kg, space requirement length: 2,200 mm, space requirement width: 1,000 mm, CONTROLS .. electronic controls OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 300 mm Bwjlrjv N Ul Ueav Abel .. sheet thickness max.: 2.5 mm DECOILER .. coil weight max.: 1.25 to LEVELLER UNIT .. sheet width max.: 4 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 0.3 mm .. material cross section max. (450 N/mm2): 350 mm² .. number of leveller rolls: 11 .. diameter of leveller rolls: 60 mm .. drive power: 2.7 kW .. loop controls: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1000 mm .. total height: 1700 mm .. total weight approx.: 1250 kg Equipment: - SOP unwinder - SOP belt control Pneumatic infeed rollers Ø 80 mm. Manually adjustable outfeed rollers Ø 80 mm. Max. straightening capacity 3.4 x 300 at tensile strength Rm 350 N/mm2

Condition: good (used), axle configuration: 3 axles, wheelbase: 8,980 mm, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, first registration: 04/2016, suspension: air, color: white, tire size: 385 / 65 / R22.5, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Bwelraov Uihhsv Abel Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Measures Dimensions (LxBxH): 1404 x 260 x 400 cm Weights Empty weight: 8.789 kg Carrying capacity: 32.211 kg GVW: 41.000 kg Functional Make of bodywork: Krone Coolliner Carrier Vector 1950 Cooling engine: diesel and electric (2234 operating hours diesel; 516 electric) Wall thickness: 5 mm Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good

Condition: used, Year of construction: 2002, operating hours: 27,518 h, Price: On request BOERE sanding line 'Compact' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 128Amp Elite TKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 117Amp - Year: 2002 - Documentation available: No - Serial number: - Operating hours: 27518 Financial information Bslrav Aev Ulxcsbewl VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Bwjlrajvf Dtysv Absl - Sets of knives: 2

Condition: used, mileage: 500 km, power: 250 kW (339.91 HP), first registration: 05/2024, overall weight: 18,000 kg, fuel type: electric, color: white, axle configuration: 2 axles, gearing type: automatic, loading space volume: 36 m³, loading space width: 2,480 mm, loading space length: 6,800 mm, loading space height: 2,200 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * Location SafeServer structure Bjlravsulb Hyo Abewl * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemical certificate (IBC) * 4 rows of load securing * Lashing rings * 2,500 kg Bär tail lift * Rear view camera * Short driver's cab * Leaf/air suspension * ABS * Spoiler * Sun visor * Air conditioning * Seat heating * Cruise control * 100% electric drive * 250 kW electric motor * Battery capacity 200 kWh * Charger DC/DC 15 Ah, AC/DC 22 kW * Luxury Air driver's seat * Driver Performance Assist * Adaptive Cruise Control with FCW and AEBS-3 * Lane keeping assistant * Glass roof hatch Monthly rent 3,900 ¤ + VAT Minimum rental period 6 months incl. registration, tire wear, Inspection, TÜV, service, wear and tear Insurance is provided to the renter

Condition: used, Year of construction: 2011, KOLBUS Perfect Binding Line KM 412.B year 2011 This heavy-duty and high-speed perfect binder of the Publica series is aiming for magazine printers with higher volumes. The maximum format range of 510 mm can be perfectly utilised for 2-up productions. Overview: ZU 841.B gathering machine KM 412.B perfect binder transport and drying line HD 153.P high capacity three knife trimmer RIMA RS-3310S compensating stacker AFS 701.W 360° service portal Configuration: ZU 841.B gathering machine - hand feeding at the end of ZU - MECCANOTECNICA book block feeder FIDO DX - 18 stations basic frame - 18 feeders with automatic section thickness control ATC and signature recognition system SignaLynx - card gluer KK 841 with NORDSON PROBLUE 4 premelter - reject unit AS 841 to the left - transfer channel as connection unit to the binder Bwslraveu Nyp Ao Abol - extended jogging station - air center VARIAIR KM 412.B perfect binder - 30 clamps - infeed incl. coupling to a ZU gathering machine - main milling station with strip cutter and dust cutter - 4 spine preparing units (equalizing, notching, micro-notching, brushing station) - 1st cold spine gluing unit - cold glue pump - IR heater for intermediate drying - hotmelt spine gluing unit - premelter LH 375.C - changeable PUR spine gluing unit - NORDSON smelting unit XNO 962 - hotmelt side gluing unit - premelter LH 375.A - lining station - IR heating at curve - stream cover feeder SAL 413.B - scoring station for 4 scores - 2 pressing stations - straight delivery - lay down device to the left with shingled stream function Technical specifications: mechanical speed: up to 12.000 cycles/h mechanical speed for use lining station: up to 8.000 cyles/h size range max.: 320 x 510 x 80 mm size range min.: 100 x 105 x 3 mm transport and drying line - incl. drying tower (9,25 windings) - with reject unit / emergency delivery HD 153.P high capacity three knife trimmer - right hand infeed with stacker - Copilot with touch screen monitor - standard cutting tables (no. 7 - 18) Special equipment: - silicon-spraying device - 2 set of knives Technical specifications: mechanical speed: up to 6.600 cycles/h size range trimmed max.: 300 x 420 x 80 mm size range trimmed min.: 100 x 120 x 5 mm (magazine mode) size range untrimmed max.: 310 x 430 x 80 mm stack height: max. 80 mm RIMA RS-3310S compensating stacker - delivery to left and right Technical specifications: mechanical speed: up to 15.000 cycles/h size range max.: 321 x 470 x 80 mm size range min.: 100 x 125 x 2 mm stack height max.: 235 mm KOLBUS type: XRS 130 AFS 701.W 360° service portal

Condition: used, Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available Suction capacity: 500 - 1000 m³/h Warranty: 12 months Bwoleb Rgxnsrav Abjl Status: Refurbished Delivery time: by arrangement

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: Fanuc Arc Mate 120i/B/20, load capacity: 20 kg, workpiece weight (max.): 500 kg, Equipment: documentation/manual, The robot is mounted on a linear axis with a span of 4 m. It has a dual positioner with a payload of 500 kg. Bslrav Ajvb Evbobewl Please refer to the description for details of the system. The system has not been in use for several months and can be inspected at any time. The robot has been regularly serviced and is fully functional. The system has very few operating hours, as follow-up orders have not been received in the expected volume.

Condition: used, Year of construction: 1996, Price: On request BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 Bwolov Ukdwsrav Abel - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2013, Labotek Trockenlufttrockner DDM 5/60 60 Liter Bj. 2013 + Förderer price: 4.950 € Contact: Mr. Rainer Eckerle Bolrav Aov Rdbbsbewl

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. Bolrav Asvxa Aqsbswl - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: used, machine/vehicle number: 16063, Perforier- und Nutmaschine - Perforation and Creasing machine TORINO PD-1/B Bwsloh Axknsrav Absl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2021, Condition: as good as new (ex-display), Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Sogevac SV 300 B Cat. no.: 960702 Bweleb Enbrorav Abel Status: Feeding unit as good as new nominal suction capacity: ca.280 m³/h final pressure: ca.0,08 mbar w. gas ballast Warranty: 12 months accessories: manual, mineral oil filling

Year of construction: 2005, Condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Bwslraved Tw T Nj Abel Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface • Easy servicing of the drain pan We have 6 pc on Stock!

Condition: good (used), Gear motor, electric motor Bwslredwdrieav Abol -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Number: 1x available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Condition: excellent (used), Fuji 3710 flow wrapper in excellent condition. Machine is inverted so it seals on the top (and ends) and product is placed directly onto the film. Bwslrenbfifoav Abel

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 1050, IN ADDITION TO THE MACHINE, THERE ARE: KOLBUS ZU 840 SIGNATURE COLLECTOR, 4 STREAMFEEDER MOD. OMG LOADERS COMPLETE WITH CLAMPS, 1 MULLER MARTINI LOADER, BOOK BLOCK FEEDER WITH LEFT-HAND LOADING, RAISING DEVICE, AMBAFLEX TOWER MOD. SV-400-1800-HS. THE MACHINE IS WORKING AND CAN BE CHECKED AT OUR OFFICE IN MALALBERGO (BO), BY APPOINTMENT. Bslrasv Rp Nqsv Abewl

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bwjljh Axd Nerav Abol

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Bjlsd Rcigorav Abewl Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, chip blower -Engine power: 22 kW -Speed: 1460 rpm -Volume flow: 22,100 m³/h Bwjlrsvvh Uvsav Abol -Total pressing: -Connection input: Ø 560 mm -Connection output: 450 x 560 mm -Dimensions: 1270/1500/H1600 mm -Weight: 507 kg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Bwslraveum Unts Abjl Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Bwolrod Nt Rqjav Abel Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°