Used Nilfisk-Alto Neptune 2-41 for sale (49,325)

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Internal article no.: 24006 Industrial robot Kuka KR150 / 2 Tj YEAR OF MANUFACTURE:2001 + control unit + control panel Cgslnorywt Rj U U Eiot Robot: Kuka KR150/2Tj YEAR OF MANUFACTURE:2001 6- axes serial no.: 786657 LxWxH: 1800 x 1700 x 2200mm Weight: 1120Kg Control system: Kuka (V) KR C1 Serial no.: 10072 YEAR OF MANUFACTURE: 2000 LxWxH: 1200 x 800 x 1200mm Weight: 140Kg Control panel: Kuka VKCP VKR C1 / 69-000-399 Serial no.: 19862

Condition: used, Year of construction: 1977, Control type: conventional Axis travel: X: 1120 mm Y: 345 mm Z: 400 mm Vertical feeds: 5 - 250 mm/min Longitudinal and transverse feeds: 16 - 800 mm/min Table area: 400 x 1600 mm Cgolnewdivvj U U Eijt Speed range: 28 - 1400 rpm Tool holder: SK50 Total power requirement: 14.5 kW Machine weight approx.: 3.65 t Space requirement approx.: 2345 x 1950 x 2060 mm (LxWxH) External control cabinet with plug-in connections. Equipment: - 3-axis digital display - Pivoting control panel (suspended) The machine can be tested/demonstrated live on-site. All information is provided without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2017, operating hours: 918 h, Field of application: Construction Colnjr Idcls U U Eijgt Empty weight: 900 kg Make of engine: Yanmar 4TNV88-K Capacity: 4,1 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3.01x1.4x1.38 Working pressure: 7 bar Please contact Sales Department for more information

Condition: new, Mobile tube bender with manual hydraulic pump for bending steel tubes larger diameters. Bending is done via dies that come in commonly used tube dimensions allowing bends up to 90°. Appropriate attachments for various diameters are included. Cgsln Usuzlh Is U Eist

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt Celn U Uou Ngu So Eiegt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: good (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 078603 L115, power: 45 kW (61.18 HP), Infeed width: 650 mm Infeed height: 150 mm Infeed rollers: 2 Material feed: Shaking chute (approx. 18 m) Cgoln Ujwcmgij U Eist 2 sets of 4 new knives each + 2 sets of 4 used knives each

Condition: used, Year of construction: 2013, Year of manufacture: 2013 Empty weight: 19.860 kg Extendable superstructure: Yes Price: On request Meusburger MTS-5+2+2. Year: 2013. 12 tons Gigant axles. Weight: 19.860 kg. Max weight: 84.000-108.000 kg. Kingpin load: 18.000-24.000 kg. Hydr. gooseneck. Hydraulic works on NATO. EBS ABS ALB. Toolbox on neck. Central greasing system. 2 x 6 meter extandable. Total 12 meter extand! 2 x 25 cm widened. Hydr. suspension. 1st axle liftaxle. Powersteering all axles steering axles. Dimmensions: Neck: L: 3900 mm. W: 2550 mm. H: 1500 mm. Kingpin height: 1250 mm. Cgelnov Nhuio U U Eijt Floor: (5 axles) L: 9500 mm. W: 2550 mm. H: 900 mm. 2 x Meusburger MUA-2. 12 tons gigant axles. Max weight 24.000 kg. Lenght floor: 3200 mm (x2). Tyres: 245/70R17,5 80%. ID NR: 450. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, For sale is a sawmill dust extraction system in excellent condition, with an 11 KW extraction motor and the accompanying 40 m3 closed sawdust storage container. Cgelowff Absn U U Eijt

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50Hz installed capacity: 104 KVA current intensivity max. 150 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Cgelsv N Rabjn U U Eist Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, HSK - Motor-driven guillotine shear: - Motor: Dietz 380-3-50, 2.2 kW - Stroke rate: 100 rpm - Weight: approx. 700 kg - Driven by brake motor - Cut initiated by a movable foot switch - Shear table with support table extended to approx. 600 mm Cjln U Usv Tm Hls Eiegt - Side stop TA 500 with scale - Folding rear width stop ZA 500 - Manually adjustable. The stop can be raised for long sheets. - Fully installed and ready for use Additional: Pneumatic hold-down device

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm Celn Uou Ngvie U Eiogt *

Year of construction: 2016, Condition: not inspected (used), Functionality: limited functionality, machine/vehicle number: 989913230000, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food use. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. Cgelnevu Sgas U U Eiet The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Replacing the motor bearings is also recommended. Further information is available upon request.

Condition: used, mileage: 1,007,609 km, power: 315 kW (428.28 HP), first registration: 05/2019, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, sleeping cabin, +++Very good condition. Sleeping seats with lap belts available, currently 49+1+1 installed+++ +++3 benches included+++ Engine: Mercedes-Benz Emission class: Euro 6 Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment: Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Leather headrest inserts * Driver microphone * Wheelchair space * Wheelchair lift Exterior: Raising/lowering system * Power steering * Tachograph with card Cgeln U Usv Swvne Eist * Sun visor * Sleeping compartment prepared * Exterior mirrors Electric * Ski case eyelets * Central locking * Roof hatches, fans, roof vents Audio and communication navigation system * Voltage converter * Radio/CD * USB on the radio * USB on the benches * Video/DVD Other vehicle dimensions: Length 13.11 m, width 2.55 m, height 3.77 m * German vehicle registration document * Hubcaps * Dual tires * Tires: Front 40%, Rear 40% Our internal vehicle number: 11439 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles are always available.

Condition: ready for operation (used), Year of construction: 1990, Weinig Type Profimat P22 N/2 Year of manufacture 1990 Number of spindles 5 Spindle arrangement: U-R-L-T-U Celn U U Ejv T Rycjiegt Motors kW 4 - 7.5 - 5.5 Mobile spindle - the left shaft automatically adjusts to the scanned width Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter 40 mm Table length approx. 2000 mm Cardan feed Safety cover Table lubrication: lubricant pump Feed in front of the planer Feed speed continuously variable 5-22 m/min., 2.2 kW Profiling package: axial adjustment of the right and left shafts 20 mm Sliding rollers: 1 driven unit Electric adjustment of the thicknessing shaft Weight approx. 1800 kg Price €11,500 Year of manufacture 1990 Condition tested for functionality

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Cgsln U U Eev N Razeist Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable Cgsln U Ujwcaqhj Eiet - Analogue operation, integrated in the control cabinet

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm Cjln Usv N N Scj U Eiogt threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: not inspected (used), Year of construction: 2016, Functionality: limited functionality, machine/vehicle number: 989913220001, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food use. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Cjln U U Eovu R U Aeiegt Replacing the motor bearings is also recommended. Further information is available upon request.

Condition: used, Year of construction: 1995, GNT S 1300/2 Upper and lower panel brush and washer. Working width: mm. 1300 Cjlev E N Rden U U Eisgt 3 Lower brushes 3 Upper brushes Maximum panel thickness: 100 mm

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: SA14F04798, type of input current: AC, input voltage: 380 V, input current: 26 A, power: 10 kW (13.60 HP), Nordson Pro Blue 4/2 hotmelt glue unit suitable for 2 hose connections. The tank has a capacity of 4 liters. Cgjln Ujway Nxs U Eist The unit can also be supplied with 4 hose connections. The price is then to be determined. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional

Condition: used, overall weight: 65,000 kg, maximum load weight: 51,600 kg, axle configuration: > 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. * Telescopic loading bed, length approx. 8,800 mm, with a rear slope of approx. 500 mm x 10° * Recess in the slope and extending into the loading bed to accommodate the excavator dipper * One pair of two-part steel ramps * BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles self-steering * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF tires with twin tires * WABCO EBS-E braking system * Steel bulkhead, pluggable, approx. 400 mm high * One pair of pluggable aluminum side walls on the gooseneck, approx. 400 mm high, anodized * One pluggable aluminum rear wall on the gooseneck, approx. 400 mm high High, anodized finish * 2 kingpins * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair of permanently installed wheel recesses, open to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle * Wheel recesses with sheet metal covering and square climbing rails, approx. 15 x 15 mm, approximately every 200 mm * Between the 2nd and 3rd axles in the loading area, 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * Covers for wheel recesses, divided lengthwise, with wooden support, with external plug-in safety devices * WABCO Smart Board System * 1 single-piece stainless steel toolbox, approx. 2,480 x 340 x 390 mm * Galvanized stands for the Extendable wheel well extensions for widening the wheel well covers * Central lubrication system with 1 pump, brand BEKAMAX Cgjln U Uewbb Ulj Eiet * 1st axle with automatic lifting axle function and traction aid * 1 LED reversing light on the left and right rear of the vehicle * Complete HRM (High Resistance Metallization) metallization

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Minimum length of the processed element 470mm Cgsln U Usv Tv Urj Eiot Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: good (used), Year of construction: 2019, operating hours: 2,320 h, Functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (6) Year of construction 2019 Operating hours 2,320 hours, as of August 24 Number of pressed bales 4,359 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a Cgsln Uou Thipe U Eijt bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Year of construction: 2020, Functionality: limited functionality, machine/vehicle number: 2212029166-010-001, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food processing. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. Cgelsvu Sh Den U U Eijt The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Replacing the motor bearings is also recommended. Further information is available upon request.

Condition: good (used), Year of construction: 2019, operating hours: 673 h, Functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (5) Year of construction 2019 Operating hours 673 hours, as of August 24 Number of pressed bales 1,127 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Coleu Thicen U U Eijgt Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.