Used Nilfisk-Alto Floortec R360 B Obc for sale (6,873)

Condition: good (used), Year of construction: 2014, mast type: telescopic, lifting height: 24,000 mm, fuel type: diesel, General information Mileage: 59.207 km Field of application: Construction Cjbst S T Nmj Emr Tvegt Weights Empty weight: 3.500 kg Functional Working height: 2.600 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Delivery terms: EXW Max. horizontal reach: 1350 m Additional information Please contact Sales Department Collé Sittard for more information

Condition: used, Functionality: fully functional, power: 127 kW (172.67 HP), fuel type: diesel, Year of construction: 2006, operating hours: 16,500 h, Brand: Liebherr Cgobovzz Sfo Emr Tvst Model: A924 B Litronic Power 127 kW Transport length (mm) 9700 mm Transport width (mm) 2750 mm Transport height (mm) 3220 mm Transport weight (kg) 20000 Speed at max. torque: 2000 rpm Operating hours: 16500 hours Year of construction: 2006 - Central lubrication system - Quick change device The machine was refurbished at a cost of over €40,000.

Condition: used, Year of construction: 2020, Functionality: fully functional, total length: 960 mm, sweeping width: 350 mm, drive type: Elektro, net weight: 59 kg, fuel type: electric, construction height: 1,220 mm, engine type: Elektro, construction width: 550 mm, Scrubber dryer Condition: New Csb Emrevzzdbj Tvegt Technical condition: New

Condition: used, Twin cutting band saw Raimann B110 duo Roll diameter 1100 mm Roll width 100 mm Cob Emrjdfc Shj Tvegt Feed rate of 0-40m / min

Year of construction: 2023, Condition: new, TECHNICAL SPECIFICATIONS SINO V10-B X-axis travel 1,000 mm Y-axis stroke 620 mm Z-axis travel 630 mm The distance spindle nose to table 120 ~ 750 mm T-channels 5 x 18 T channel distance 100 mm The size of the working area of the table 1,200 x 600 mm Maximum weight per table 800 kg Spindle taper type BT 40 Main axis motor power (30 min./continuous) 15/11 kW Main shaft motor torque S1 - 52,5 Nm / S2 - 95,5 Nm / S3 -118, Nm Main shaft transmission Direct drive Maximum speed of the main shaft 12,000 rpm SPECIFICATION OF X, Y, Z AXES Rapid feed on the X/Y axis 36 m/min Rapid feed on Z-axis 32 m/min Maximum feed X/Y/Z axes 10,000 mm/min Cgeb Emr Toiyyypevst X/Y axis motor power (Torque) 3 kW (20 Nm) Z axis motor power (Torque) 3 kW (36 Nm) ATC TOOL SHOP (automatic tool change) Tool magazine type With arm Tool magazine capacity 24 Tool holder type BT 40 Tool change time 2.5 sec. ACCURACY X/Y/Z positioning accuracy ± 0.008 mm X/Y/Z repeatability ± 0.005 mm MACHINE DIMENSIONS Length x width 2,850 x 2,450 mm Height 2,850 mm Weight 6,800 kg ACCESSORIES INCLUDED IN THE PRICE Fanuc 0i-MF controller with 10.4˝ color LCD monitor Main shaft with direct coupling (Direct Drive), motor 11/7.5 kW and maximum speed 12,000 rpm 3 axes controlled simultaneously Linear guides with rollers on the X, Y, Z axes 45mm Tool magazine with arm with 24 positions Cooling unit with tank Oil spindle cooling system Spindle air blowing system Air gun System for separating oil from the coolant (Oil Skimmer) Chip conveyor with chain Closed electrical panel with air conditioning Communication interfaces for programs and data: RS 232 interface, CF card and USB M30 automatic shutdown Transformer Centralized automatic lubrication Rigid tapping Inside machine LED work lamp x2 LED warning lamp in 3 colors MPG (manual pulse generator) mobile remote control with cable Screws and soles for leveling the machine Tool box + tools Operating manuals and spare parts list Telescopic guards for all 3 axes Fully enclosed workspace with self-locking doors CE mark 2 year warranty on control 1 year on machine delivery is free on truck showroom CNC Top Ten bv Denekamp Holland

Condition: like new (used), designed for packaging food products on trays, fruit, veg, meat, fish, cheese, poultry to retain freshness and presentation, min pack dimensions 90mm L x 110mm W x 10mm H, max dimensions 200mm L x 300mm W x 160mm H, width of film 280mm - 550mm2004 Cjb Eed Dcyrjmr Tvsgt

Condition: good (used), Year of construction: 2013, mast type: telescopic, lifting height: 24,000 mm, fuel type: diesel, General information Mileage: 51.500 km Field of application: Construction Weights Empty weight: 3.500 kg Functional Working height: 2.600 cm Condition Cgob Emot S T Iijr Tvjt Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Delivery terms: EXW Max. horizontal reach: 1350 m Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), Year of construction: 2021, operating hours: 8 h, Functionality: fully functional, working width: 560 mm, area performance: 3,000 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 70 l, gradeability: 10 %, COMAC INNOVA 55 B SCRUBBERS NEW 12V 105Ah SIAP GEL BATTERIES (2x) 2021 year of production Machine mileage is 8 hours 560mm cleaning head equipped with a medium hardness disc brush, allowing work on any surface New natural rubber (rear rubber) and polyurethane (front rubber) squeezing rubbers The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 560 Csbsv Ew H Hs Emr Tvjgt Suction width (mm): 800 Theoretical efficiency (m²/h): 3000 Tank capacity clean/dirty water (l): 70/70 Number of brushes (pcs): 1 Brush speed (rpm): 170 Weight without batteries (kg): 110 Total weight, ready to work (kg): 190 Climbing ability (%): 10 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (x2) NEW suction turbine NEW drain hose NEW suction hose 560mm PPL 0.5 disc brush Suction bar with new rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: 70-litre tank allows you to pour a large amount of solution cleaning agent, so you don't have to stop work often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic suction beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (560mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: good (used), Year of construction: 2006, BIGLIA B 301 LATHE FANUC Series 21i - T CNC 2-AXIS LATHE COMPLETE WITH DOCUMENTATION Cgsb Emevrwqxsr Tvst YEAR OF FIRST INSTALLATION: 2006

Year of construction: 1992, Condition: used, Raimann B110S band saw Roller diameter 1100mm Roll width 100mm Cutting width right and left of saw blade 200mm Cob Emeb R Ty Asr Tvjgt Cutting height max. 400mm

Condition: used, Year of construction: 1990, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, travel distance X-axis: 310 mm, Sale of a Macmon M 200 B horizontal milling machine (built in 1990) For sale is a Macmon M 200 B horizontal milling machine from 1990, equipped with a Haidenhain digital display and an Almatic vice. The machine is in working condition and is ideal for precise milling work in workshops and small series production. Technical details: Travel paths: 600 x 310 x 400 mm Table size: 900 x 350 mm Speed range: max. 1900 rpm Spindle mount: SK40 Feeds: Manual or with automatic feed Digital display: Haidenhain POSITIP 880 Condition: Used, functional Cgjb Emr Tsvx A Ipovet Note: The sale is without guarantee or warranty.

Condition: new, overall weight: 2,700 kg, empty load weight: 655 kg, maximum load weight: 2,045 kg, axle configuration: 2 axles, loading space volume: 8.8 m³, loading space length: 3,050 mm, loading space width: 1,520 mm, loading space height: 1,930 mm, color: black, construction height: 2,560 mm, working width: 2,050 mm, Hydraulics, automatic reversing, hot-dip galvanizing, unbraked, tandem with sheet steel sandwich body 30 mm walls, braked, 2 lashing rails, 4 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with sheet steel sandwich body 30 mm walls, braked, 2 lashing rails, 4 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,700 kg - Unladen weight: 655 kg - Payload: 2,045 kg - Interior dimensions: 305 x 152 x 193 cm (L x W x H) - Overall exterior dimensions: 455 x 205 x 256 cm (L x W x H) - Loading sill height: 59 cm - Tires: 185R14C steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, Finnish multiplex board - Walls: 30mm sheet steel sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber spring axle - Number of lashing eyes: 4 pieces (750kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimension tailgate/flap: - Interior light: at extra charge - Supports: at extra charge - Overrun device & brakes: yes - Rear door: yes - 100km/h: at extra charge - incl. vehicle documents Overrun device & brake: yes, - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Registration papers: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - tandem axle - overrun device from ALKO - floor panel made of Finnish multiplex - side walls made of very solid sheet steel sandwich, 30 mm thick - roof made of GRP sandwich 25mm - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - stainless steel espagnolette lock and hinges galvanized - rear frame and edging profiles made of special aluminium profiles - 4 lashing points in the floor, 750 kg lashing force - trailer has pre-mounted lashing strip on both sides - automatic jockey wheel - automatic reversing - plastic mudguards - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - additional slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 Ceb Emeu Ht Iyjr Tvogt

Year of construction: 1999, Condition: used, Machining center for muntins KOCH Type B-510-S workpiece length 120-3000 mm workpiece width 20-290 mm workpiece thickness 30-100 mm drill- chipboard HM drill, solid wood HSS drill cutter speed up to 18000 rpm dowel dimensions diameter 8 x 60 mm dowel projection variable working height 900 mm connected load 16 kW dimensions LxWxH 5400 x 3500 x 2900 mm Csb Esilurvsmr Tvogt Weight approx. 4000 kg

Condition: excellent (used), Battenfeld Unilog control 9000 B Csb Emrsf N Ivvs Tvsgt

Condition: used, Year of construction: 2018, ----Construction: Caterpillar sorting grapple type 522-5887, volume 0.9 m³, year of manufacture 2018, weight: 2,073 kg. I.D.-Plate model 226-4127, type CW20/CW30/CW40, year of manufacture 2018, weight: 141.2 kg Cgeb Emeqrltror Tvjt Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, machine/vehicle number: hsmob125, Seppi M. H-SMO-B 125 mulcher / NEW / in stock & available immediately Price: 11,790.00 ¤ net / 14,030.10 ¤ gross Working width: 125 cm Total width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - strong and maneuverable device for attachment to excavators or crawler vehicles, ideal for maintaining embankments and fallow land - mulches grass and light bushes up to 7 cm Ø - for excavators from 5 to 13 tons - for mounting on various attachment plates - drive intended for hydraulic motor depending on the delivery rate of the carrier device - indirect V-belt drive with 4 V-belts - drop-forged counter blades Ceb Ejp R E Sbomr Tvegt - double-walled housing made of high-strength steel - adjustable discharge hood, with rubber protection at the rear - reinforced support roller with double tapered roller bearing, height adjustable by 5 cm - wall thickness of the rotor: 12.5 mm - front protection with chains - color: red RAL3020 · anthracite RAL7021 OPT 371 rotor with SMO hammer (standard) - 12 pieces, ET number 130.02.001 OPT 291 VARIO FLOW - axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 60 - 120 OPT 099 Floating attachment (parallelogram guide) Optional: MS08 adapter plate including screws and assembly = 750.00 € net 3 hydraulic lines are required: supply, return and leak oil. The device is delivered without hoses or connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. In our warehouse we have a very large selection of different products from Seppi M. that are available immediately! Simply contact us at . If you wish, we will also be happy to make you a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are also one of the largest commercial vehicle dealers in Germany with 800 used vehicles. We supply the complete Seppi M. range for you! Errors and prior sale reserved!

Year of construction: 2025, Condition: new, Functionality: fully functional, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: Csb Emovnb Iger Tvjgt - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Condition: new, overall weight: 2,700 kg, empty load weight: 735 kg, maximum load weight: 1,965 kg, axle configuration: 2 axles, loading space volume: 8.8 m³, loading space length: 3,050 mm, loading space width: 1,520 mm, loading space height: 1,930 mm, color: black, construction height: 2,560 mm, working width: 2,050 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanized, Unbraked, Drive-on flap / sheet steel sandwich body 30 mm walls / 2 lashing strips / 4 lashing eyes, * IMMEDIATELY AVAILABLE * incl. drive-on flap / sheet steel sandwich body 30 mm walls / 2 lashing strips / 4 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2700kg - Unladen weight: 735 kg - Payload: 1,965 kg - Interior dimensions: 305 x 152 x 193 cm (L x W x H) - Overall exterior dimensions: 455 x 205 x 256 cm (L x W x H) - Loading sill height: 59 cm - Tires: 185R14C steel rim - Brake: yes - Support wheel: yes, automatic, 500 kg - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, Finnish multiplex board - Walls: 30mm sheet steel sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber spring axle - Number of lashing eyes: 4 pieces (750kg/daN) - Rear door: no - Tailgate: yes - Tailgate material: aluminum - Tailgate/door function: espagnolette lock - Clearance dimension tailgate/flap: - Interior light: at extra charge - Supports: at extra charge - Overrun device & brakes: yes Overrun device & brake: yes, - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Registration papers: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - tandem axle - overrun device from ALKO - floor panel made of Finnish multiplex - side walls made of very solid sheet steel sandwich, 30 mm thick - roof made of GRP sandwich 25mm - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - stainless steel espagnolette lock and galvanized hinges - rear frame and edging profiles made of special aluminium profiles - 4 lashing points in the floor, 750 kg lashing force - trailer has pre-mounted lashing strip on both sides - automatic jockey wheel - automatic reversing - plastic mudguards - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: COC papers Special equipment included in the price: - Aluminum access ramp instead of hinged door Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - additional slot-hole rails for lashing straps & locking beams - bar strip with rubber coating for lashing straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cgjb Eou Skx Tjmr Tvet

Condition: used, Year of construction: 2018, ----Construction: Caterpillar sorting grapple type 522-5887, volume 0.9 m³, year of manufacture 2018, weight: 2,073 kg. I.D.-Plate model 226-4127, type CW20/CW30/CW40, year of manufacture 2018, weight: 141.2 kg Cebjqw S D Ts Emr Tvjgt Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, Seppi M. H-SMO-B 125 mulcher / incl. Van Osch mount / incl. floating attachment / NEW machine / in stock & immediately available Price: 12.290,00 ¤ net / 14.625,10 ¤ gross - Working width: 125 cm - Overall width: 140 cm - Depth: 120 cm - Height: 60 cm - Weight: 380 kg - Support roller: 152 mm - V-belt: 4 - Powerful and maneuverable device for attachment to excavators or tracked vehicles, ideal for maintaining embankments and fallow land - mulches grass and light bushes up to 7 cm Ø - for excavators from 5 to 13 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 4 V-belts - drop-forged counter blades Cobjvi Tr Hs Emr Tvogt - Double-walled housing made of high-strength steel - Adjustable discharge hood, with rubber protection at the rear - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm - wall thickness of the rotor: 12.5 mm - Front guard with chains - Color: red RAL3020 - anthracite RAL7021 OPT 371 Rotor with SMO beater (standard) - 12 pieces, ET number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 120 OPT 099 Floating attachment (parallelogram guide) Incl. Weld-on adapter frame WOAF ? KNSW80 (Van Osch mounting) Incl. hydraulic hoses see photos 3 hydraulic lines are required: Flow, return and drain oil. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Mr. Herden (Tel. will be happy to assist you. We will also be happy to make you a financing offer on request. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale! Internal no.: 360029

Year of construction: 2025, Condition: new, Functionality: fully functional, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) Cob Emsvnb Hcer Tvsgt -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Condition: new, overall weight: 3,500 kg, empty load weight: 865 kg, maximum load weight: 2,635 kg, axle configuration: 2 axles, loading space volume: 1.9 m³, loading space length: 3,020 mm, loading space width: 1,550 mm, loading space height: 350 mm, color: silver, construction height: 2,160 mm, working width: 2,040 mm, Automatic reverse drive, hot-dip galvanizing, swivel ramps / full steel floor / shovel shelf, *INSTANTLY AVAILABLE incl. swivel ramps / full steel floor / shovel shelf Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 865 kg - Payload: 3,500 kg - Interior dimensions: 302 x 155 x 35 cm (L x W x H) - Overall exterior dimensions: 486 x 204 x 216 cm (LxW) - Loading sill height: 49 cm - Tyres: 185R14C - Brakes: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle superstructure: - Floor: Sheet steel floor! - Drop sides: solid steel drop sides - Drop side height: 35cm - Chassis: ALKO rubber spring axle - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 12 - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 8 pieces in the floor inside - Supports: integrated in ramps - Ramps: 170cm ramps standing on shaft, can be swung away - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Bucket storage - Welded dropside/frame construction made of steel grey RAL 7037, powder-coated - Very stable bolted V-drawbar REINFORCED - Drop sides 35cm high - Immersion bath hot-dip galvanized steel ramps upright, - perforated ramps can be swung away so that the trailer can also be loaded with a forklift - extremely sturdy welded tubular lattice frame completely hot-dip galvanized - tree rail trailer with an enormously high load capacity - walkable aluminium chequer plate mudguards - 8x lashing eyes in the floor inside (750daN/pc) - automatic reversing - ALKO overrun device and parking brake - sturdy locks for ramp - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cob Emeu Hricjr Tvegt

Condition: new, machine/vehicle number: hsmob125d, Seppi M. H-SMO-B 125 mulcher / rotary motor / Vario Flow / NEW / in stock & available immediately Price: 15,590.00 ¤ net / 18,552.10 ¤ gross Working width: 125 cm Total width: 140 cm Depth: 120 cm Height: 60 cm - strong and maneuverable device for attachment to excavators or crawler vehicles, ideal for maintaining embankments and fallow land - mulches grass and light bushes up to 7 cm Ø - for excavators from 5 to 13 tons - for mounting on various attachment plates - drive provided for hydraulic motor depending on the delivery rate of the carrier device - indirect V-belt drive with 4 V-belts - drop-forged counter blades - double-walled housing made of high-strength steel - adjustable Ejection hood, rear with rubber protection - reinforced support roller with double tapered roller bearing, height adjustable by 5 cm - wall thickness of the rotor: 12.5 mm - front protection with chains - color: red RAL3020 · anthracite RAL7021 OPT 371 rotor with SMO hammer (standard) - 12 pieces, ET number 130.02.001 OPT 291 VARIO FLOW - axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 60 - 120 OPT 099 floating attachment (Parallelogram guide) OPT 372 hydraulic 190° rotating device Optional: MS08 adapter plate including screws and assembly = 880.00 € net 3 hydraulic lines are required: flow, return and leak oil. The device is delivered without hoses or connections. Cob Emomqd Sisr Tvsgt Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. In our warehouse we have a very large selection of different products from Seppi M. that are available immediately! Simply contact us at . If you wish, we will also be happy to make you a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are also one of the largest commercial vehicle dealers in Germany with 800 used vehicles. We supply the complete Seppi M. range for you! Errors and prior sale reserved!

Year of construction: 2025, Condition: new, Functionality: fully functional, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm Csbovnb Dbo Emr Tvsgt - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Condition: new, overall weight: 2,700 kg, empty load weight: 695 kg, maximum load weight: 2,005 kg, axle configuration: 2 axles, loading space volume: 10.3 m³, loading space length: 3,550 mm, loading space width: 1,520 mm, loading space height: 1,930 mm, color: black, construction height: 1,930 mm, working width: 2,030 mm, Hydraulics, automatic reversing, hot-dip galvanizing, unbraked, tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 4 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 4 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2700kg - Unladen weight: 695 kg - Payload: 2,005 kg - Interior dimensions: 355 x 152 x 193 cm (L x W x H) - Overall exterior dimensions: 515 x 203 x 193 cm (L x W x H) - Loading sill height: 59 cm - Tires: 185R14C steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, Finnish multiplex board - Walls: 30mm sheet steel sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber spring axle - Number of lashing eyes: 4 pieces (750kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: - Interior light: at extra charge - Supports: at extra charge - Overrun device & brakes: yes - Rear door: yes - 100km/h: at extra charge - incl. vehicle documents Overrun device & brake: yes, - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Registration papers: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - tandem axle - overrun device from ALKO - floor panel made of Finnish multiplex - side walls made of very solid sheet steel sandwich, 30 mm thick - roof made of GRP sandwich 25mm - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - stainless steel espagnolette lock and galvanized hinges - rear frame and edging profiles made of special aluminium profiles - 4 lashing points in the floor, 750 kg lashing force - trailer has pre-mounted lashing strip on both sides - automatic jockey wheel - automatic reversing - plastic mudguards - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - additional slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. Cjbju Htkne Emr Tvegt