Used Ajce Ab-280F for sale (87,580)

Year of construction: 2018, operating hours: 1 h, Condition: as good as new (ex-display), machine/vehicle number: 1CY1119D00007, DONALDSON dryer Buran DC 0225 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0225AB Medium: compressed air, free from aggressive components Flow rate: 3,75 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1 1/4" Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 870 mm Bwsb Hjdy Drbel Akujl Width: 480 mm Length: 660 mm Weight: 68 kg

Year of construction: 1995, Condition: ready for operation (used), A used compressed air refrigeration dryer. Bwjb Hl Asfy Trhekuol The refrigeration dryer was checked for function by refrigeration engineer before decommissioning. He then extracted and disposed of the 18 kg of R22 refrigerant ( 2 bottles). All protocols available. Afterwards a small amount of nitrogen was filled in. Gladly we can let them fill the dryer with new refrigerant ( for example R407C ). !! Selling price is without refrigerant !!! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A max. volume flow: 55m³/min (3340 m³/h) pressure drop at max. volume flow: 0,38 bar Weight of refrigerant: 18 kg ( actual without refrigerant) Max. pressure refrigerant side: 16/ 25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch max. pressure compressed air side: 16 bar max. volume flow max. temperature: compressed air: 60°C power consumption with fans: 7,1 kW voltage: 400Volt size width/ depth/ height: 1880mm / 1100mm / 2000mm weight: 835 kg

Condition: new, 1. Sikafloor 20 PurCem ABCD color Dusty Grey RAL 7037: 12 kpl. x 32.5 kg = 390 kg 2. Sikafloor 260 PurCem ABCD color Dusty Grey RAL 7037 : 66 kpl. x 25 kg = 1650 kg Bwsb Hl Ajvbfnqskusl

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Bwebjwc T Aqe Hl Akuol Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1800027, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Chip conveyor: present Control system: Siemens 840D Coolant and lubricant processing system Manufacturer: Knoll Type: AE1058 Bwsb Hjwhdqcjl Akusl Year of construction: 2004

Condition: good (used), Equipped with: Siemens Simatec Panel PC Qass Crack Detection Headstock Tailstock Load Unload Panel Chiller Bjb Hl Aeruaiqekuowl Specifications: 4 Ton Capacity 500mm Maximum Workpiece Length

Condition: used, Year of construction: 2007, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Somab Lathe Beb Hl Aksv Rfi Tjujwl Type Deltamab 300 Year 2007 Siemens Sinumerik 840D CNC With Tooling With Tailstock With Chip Conveyor With Documentation

Condition: refurbished (used), Functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 350 A, protection type (IP code): IP23, welding current (min.): 16 A, welding current (max.): 500 A, For sale: ESAB Aristo Mig 5004i 500 AMP 400 Volts Water-cooled 2/4 Step Manual Program memory Stick option Steel + Stainless Steel weldable. Refurbished, tested, and serviced Test welding possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Bjbjwhcx Sj Hl Akujwl Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2002, Condition: good (used), Brand: MABO Type: Participate Machine no: 76 Year of manufacture: 2002 Bebopitqme Hl Akuewl - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Height: 160 cm Stock no: 2001159BXM

Condition: good (used), spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm Bwjb Hl Akewha Nbeuel -Total weight: 170 kg

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Siemens 840 DSL X-axis travel: 550 mm Y-axis travel: 450 mm Z-axis travel: 375 mm Tool changer Capacity: 40-station Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling system Coolant and lubricant treatment system: Knoll Further information according to the manufacturer - without guarantee Swivel table / counter bearing with face gearing: Swivel time 0 - 180° approx. 3.0 s Prepared for A and U axes: yes Support for X / Y clamping blocks: yes Speed range A and U axes: 1 - 50 rpm Speed range C-axis: 7-station 4-axis Speed range: 10 - 10,000 rpm (1 - 17,500 rpm) Bweb Hjwhdp Ejl Akuel Ramp-up time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Tool change system: Pick-up Max. tool diameter: 70 mm / 160 mm (adjacent position free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Machine weight: 8.3 t Total connected load: approx. 64 kVA Control system: Siemens SINUMERIK 840 D

Condition: excellent (used), ABB IRC5 Drive Unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bjb Hsr I Aqiol Akuowl

Condition: like new (used), Ventilation plant ABB Brand: ABB Type: ABY-80-2120 Complete ventilation system for cooling and heating brief description below what is included: -Control center RW165.02 for air treatment compact unit with control, regulation and monitoring functions -Room temperature sensor - Duct temperature sensor -Outside temperature sensor - Diving temperature sensor -Setpoint converter -Air treatment unit STRATOS ABY - Defrost damper -Air heater water -Cooling battery water -Circulation pumps - Fans Bwob Hl Aslk Hvgjkuol -Heat exchanger, water, electricity, battery The plant is still in operation and can be seen on site Contact us for further information if there is interest. Stock no:2001612TKG With reservation for incorrectly presented technical data

Condition: excellent (used), ABB IRC5 teaching pendant DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bob Hl Ajr I Aqbekuowl

Condition: excellent (used), MDU-790A Main Drive Unit HV DSQC 633 is used in: IRB 2400,IRB 2600,IRB 4400,IRB 4600,IRB 6400R IRB 660, IRB 66XX and IRB 7600 Bob Hl Akjtqcumjuswl DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2007, ABB IRB6640-180/2.55 Cleanroom DEVELOPMENT OF GSG ROBOTICS Bjbor I Arge Hl Akuowl GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 only robot Bweb Hjr I Ar Ssl Akuel DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC025338-003 DSQC 617 Bjb Hler I Aqqo Akujwl DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Year of construction: 2019, ABB IRB6700+Controller+TPU+Cables Brand New DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bjb Hl Aksr I Ap Nsujwl

Condition: excellent (used), ABB IRB6640-130/3.20 DEVELOPMENT OF GSG ROBOTICS Beb Hler I Ap To Akujwl GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8 IRC5 controller DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bsb Hl Asr I Arcekuowl

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 IRC5 controller-Low DTC Bob Hl Akstqcuqjuowl DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2012, ABB IRB1600 6KG/1.2 Robot+controller IRC5 Bjb Hlor I Aqxj Akuowl DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 controller DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bebsr I Arks Hl Akujwl

Condition: excellent (used), Year of construction: 2007, ABB IRB 140 M2000+ ABB IRC5 Drive04 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bwobotcuw Ie Hl Akuel