Used Allcat 180 Hb for sale (14,293)

Condition: new, power: 207 kW (281.44 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (tel. .----IVECO Eurocargo ML180E28/P 4x2 chassis ----Standard equipment: * Wheelbase: 5,175 mm * Driver Drowsiness Attention Warning (DWA) * Standard frame overhang * Standard taillights * Standard braking system * Electronic Stability Program (ESP) * Rear view camera monitoring system * Blind Spot Information System (BSIS), right * Intelligent Speed Assist (ISA) * Front Interruption Information System (MOIS) * Pneumatic parking brake * IVECO logo, standard, light gray * DRIVE T. 295/80R22.5 * Connection cable for alcohol immobilizer (ALC) * Tire Pressure Monitoring System (TPMS) with internal sensors * Steel rims * Lane Departure Warning (LDWS) * Connectivity Box 4G including TCO service contract * Generator 1680 Watt (24 Volt x 70 Ampere) * Emergency Brake Assist (AEBS) * Speed limiter 90 km/h * Electronic immobilizer and second vehicle key * Clothes rail on the rear cab wall including movable hooks * Manually operated cab tilt mechanism * Halogen front headlights Djlqjv N R U Ej Igi Rskl * Standard cab with flat roof design * Rear cab wall without windows * Onboard tool kit * Radio with Bluetooth, DAB+ and 7-inch display * Rearview mirror for body width 2600 mm * Plastic bumpers * Black cab attachments * Fabric-covered cab interior trim * Digital 4.1 EC control unit * White flat roof * Air suspension on the rear axle * Parabolic spring on the front axle * Left-hand drive for right-hand traffic * Maneuvering and towing eye at the front * Front underrun protection for Chassis with a total mass greater than 7,490 kg * Chassis frame in gray * C-profile steel ladder frame * Steel air reservoirs, number depends on suspension and trailer version * ZF 8AP1000 automatic transmission * Exhaust tailpipe located centrally under the vehicle * Air filter unit under the cab * EURO VI E emissions standard * Two-stage engine brake. Can be activated via the right steering column stalk * Westinghouse brake * Raw air intake without snorkel OPTIONAL EQUIPMENT: * Leather-trimmed steering wheel * Heated fuel pre-filter on the frame * 70-liter AdBlue tank * 280-liter aluminum fuel tank, lockable * AdBlue tank heater * Engine intake air heater for optimal cold start performance in extreme temperatures * Rear axle ratio: 4.63 * Switchable differential lock on the drive axle(s) * Mechanical battery disconnect switch on the chassis, right * Reverse warning buzzer, switchable * Batteries 180 Ah for Heavy / 170 Ah for Eurocargo (recommended for use with a tail lift and/or power take-off) * Toll system preparation (OBU), includes antenna and wiring on the dashboard without a receiver * Voltage converter 24/12 Volt (10.5 Ampere) * Electrical preparation for cargo area light * Adaptive Cruise Control (ACC) * Hill Holder for comfortable starting on inclines * Mechanical roof hatch * Smoker's package, ashtray, and cigarette lighter * Static single passenger seat, 2-way adjustable, 3-point belt, textile cover * Car jack * Rear underrun protection, steel version * End cross member, D-value: 100 kN * Trailer socket for 24-volt operation, 15-pin * Trailer coupling, 40 mm, 100 kN, automatic * Front axle weight variant: 7,500 kg/h

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 62 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/18-4S The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1300 Working pressure (bar): 180 Maximum pressure (bar): 275 / 27.5 Connection power (kW): 9.2 Weight (kg): 62 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 Maximum water supply temperature 60°C Contents of cleaning agent tank (l) 6 EQUIPMENT: NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Dslq Isv S Tt Negi Rekl Built-in chemical tank allows dosing of cleaning fluid directly by the machine Very legible and intuitive panel control Simple construction and good access to individual components under the housing make the machine user-friendly and easy to service

Year of construction: 2021, Condition: used, total length: 1,023 mm, construction height: 630 mm, construction width: 849 mm, net weight: 1,440 kg, Traction Battery Battery Voltage: 80V Battery Ah: 625Ah Battery Manufacturer: AIM Battery Type: PzS Battery Year of Manufacture: 2021 Battery Condition: 80-100% Description: DIN A, suitable for Linde BR 387 E 25L, E 30L, and other brands. Reconditioned with 90% performance. Delsv N R Apjq Igi Rjkl

Condition: excellent (used), Functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, Riehle lye device Standing device made of stainless steel Incl. mobile table with shelf and locking rollers Dolq Igeupvnmji Rjkl Dipping with 4-spring technology Lye drain tap at the bottom Suitable for sheet size 600 x 400 mm Dimensions in mm: 500 x 702 x 880 WxDxH Used device cleaned Many lye dipping devices in stock for you!

Condition: used, mileage: 699,000 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 02/2010, emission class: euro5, Year of construction: 2010, Equipment: tail-lift, German vehicle Djlqst D Sn Es Igi Rjkl

Condition: ready for operation (used), Year of construction: 2008, Specifications : NC: FANUC 0i mate - TC Max. clearance above bench: 800 mm Max. clearance over carriage: 490 mm Distance between centers: 1000 mm Max. turning length: 785 mm 8-tool turret: 32 x 25 or dia 50 mm Spindle passage: 100 mm Spindle power: 11 kW Spindle speed: 40 to 1000 rpm Dslq Igjrxux Esi Rekl Machine dimensions: 3461 x 2000 x 1800 mm Machine weight: 5.3 t Equipped with : 380 mm hydraulic chuck Chip conveyor Tool kit

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Dolq Igiov D Hmas Rokl Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, fuel: electricity, overall weight: 62 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/18-4S The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1300 Working pressure (bar): 180 Maximum pressure (bar): 275 Connection power (kW): 9.2 Weight (kg): 62 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 Maximum water supply temperature 60°C Contents of cleaning agent tank (l) 6 EQUIPMENT: Dkslsv S Tqzsq Igi Rsl NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple design and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: good (used), mileage: 127,731 km, power: 130 kW (176.75 HP), first registration: 10/2016, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 205.75.17,5, fuel: diesel, wheelbase: 3,950 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, = Additional options and accessories = - Armrest - Audio controls on the steering wheel - AUX connection - Outside temperature display - Construction light - Differential lock - Tachometer - EBS - ESP - Extra lighting - Driver airbag - Driver seat height adjustment - Remote central locking - Low noise - Speed limiter - Tinted glass - Hydraulics Dslq Iov Iyvijgi Rekl - Height-adjustable steering wheel - Folding exterior mirrors - Air horn - Air conditioning - Center armrest - Multifunction steering wheel - Fog lights - Radio/CD player - Reversing camera - Full service history - Headlight height adjustment - Power steering - Seat heating - Start interrupter - Tachograph - Toolbox - Winch - Power take-off (PTO) - Power take-off (PTO) = Notes = Renault D 180 tow truck, Euro 6, from 10-2016 with 127,700 km. Hydraulic recovery wheel lift with remote control. This Renault is in good condition both technically and visually. For information and/or advice please email or call (also WhatsApp). = More information = Technical information Number of cylinders: 4 Engine displacement: 2,953 cc Drivetrain AdBlue system: Yes Fuel tank: 90 liters Gearbox Gearbox: 8 gears, automatic Axle configuration Tire size: 205.75.17.5 Brakes: Disc brakes Front axle: Max. axle load: 3100 kg; Steered; Brand axles: CONTINENTAL; Tire profile left: 60%; Tire profile right: 60%; Suspension: Leaf spring Rear axle: Twin tires; Max. axle load: 5100 kg; Brand axles: HANKOOK; Tire profile left inside: 60%; Tire profile left outside: 60%; Tire profile right inside: 60%; Tire profile right outside: 60%; Suspension: air suspension Dimensions Dimensions (L x W): 640 x 235 cm Weights Empty weight: 4,750 kg Payload: 2,750 kg GVW: 7,500 kg Maintenance APK (technical main inspection): New MOT upon delivery History Booklets: Present Condition Technical condition: good Visual condition: good Damage: none = Company information = Nidro cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All trade is possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), Functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, 4-spring immersion technology Stainless steel floor unit incl. mobile table with shelf and locking rollers suitable for tray size 580 x 780 mm Lye drain tap at the bottom Used appliance cleaned Dimensions in mm: 700 x 902 x 880 WxDxH 6 months warranty Dkjlq Isvdkrgsgi Rol We have many lye machines in stock!

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, PEERLESS - machine for forming paper bowls and trays. Model: HBF 36 In very good technical condition, ready to work. Dkolev R Ec Toq Igi Rsl The maximum forming depth is 3” (76.2 mm), available forming pressures enable high-quality production of deep bowls and trays of large dimensions, precise and durable set of 3 new forming dies included with the machine.

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 90*2=180 cycles/min; bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags); suitable film width: 140-380mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.4m³/min; dimensions (LxWxH): 2270*1560*1880mm; weight: 900kg. Dkjlqsv Nnfzj Igi Rjl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1998, spindle bore: 52 mm, center width: 1,500 mm, capacity 1500X575MM spindle bore 52MM external electrical cabinet bezel multifix turret several multifix tool holders Dslq Igsvl H Ruji Rokl

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 63 kg, warranty duration: 6 months, COLD WATER WASHER KRANZLE 799 TST The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and 25° power nozzle Built-in pressure hose reel makes it easy to roll up and store Durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Dkolq Iev S S E Degi Rol Thanks to the operating parameters of 180 bar and 780 l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: Kranzle 799 TST Supply voltage [V]: 400 Pumping capacity [l / h]: 780 Working pressure [bar]: 180 Connection power [kW]: 5.5 Weight [kg]: 63 Dimensions [mm]: 780 x 395 x 870 Hose [m]: 20 EQUIPMENT: NEW durable pressure gun NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 20m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE

Condition: used, mileage: 43,382 km, power: 132 kW (179.47 HP), first registration: 07/1994, fuel type: diesel, color: other, axle configuration: 4x4, tire size: 365/80 R20, fuel: diesel, wheelbase: 3,050 mm, gearing type: mechanical, emission class: euro1, suspension: steel, loading space width: 2,400 mm, loading space length: 2,400 mm, loading space height: 650 mm, Year of construction: 1994, Equipment: all wheel drive, differential lock, = Additional options and accessories = - PTO = Remarks = General PTO: 868 uur Axles Configuration: 4x4 Structure Tank capacity: 3500 liters Dslq Igijv Ikfzo Rskl View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = General information Cab: double Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 365/80 R20 Brakes: drum brakes Suspension: leaf suspension Front axle: Differential lock; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Tyre profile left: 45%; Tyre profile right: 45% Measures Dimensions (LxBxH): 585 x 245 x 285 cm Weights Empty weight: 6.460 kg Carrying capacity: 3.540 kg GVW: 10.000 kg Max. towing weight: 13.500 kg Functional Extendable superstructure: Yes Interior Number of seats: 4

Condition: excellent (used), Functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, 4-spring immersion technology Stainless steel free-standing unit with salt container Dkjlq Isvdkrtsgi Rsl incl. mobile table with shelf and locking castors suitable for tray size 580 x 780 mm Lye drain tap at the bottom Used appliance cleaned Dimensions in mm: 700 x 902 x 880 WxDxH 6 months warranty More lye machines in stock!

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, KABAN 2-head cutting machine for PVC cutting Dkslq Isv Tmnvogi Rjl

Year of construction: 2025, Condition: new, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-1800kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 60L/min; power supply: 220V; power consumption: 5.5kW. Dkelq Igisv Nnkws Rsl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Manufacturer: Andritz Dkslev Dr Hfeq Igi Rsl Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, fuel: electricity, overall weight: 70 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 901 B The device has new equipment, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle. The brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation. The very efficient Honda GX270 combustion engine ensures stable operation even with long-term use. Thanks to the operating parameters of 200 bar and 750 l / h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture. Each device we offer has individually taken photos, you buy exactly the machine you see. TECHNICAL DATA: Power supply: Combustion Engine: Honda GX 270 Pumping capacity [l/h]: 750 Dslq Igsv S Hc Dei Rekl Working pressure [bar]: 200 Maximum pressure [bar]: 230 Weight [kg]: 54 Dimensions (length x width x height) (mm): 1045 x 582 x 670 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE

Condition: used, mileage: 712,000 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, overall weight: 7,490 kg, first registration: 04/2017, loading space length: 5,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, emission class: euro6, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, MAN TGL 8.180 car transporter closed navigation Euro 6 . for inquiries: 0224142 * Empty weight: 5,460 kg * Engine: 132 kW / 180 HP * Displacement: 4,580 cm3 * Euro standard: Euro 6 * Automatic transmission * ABS * ASR * ESP * Rear axle differential lock * Hill start assist * CD radio * Bluetooth * Hands-free system * Navigation system * Adaptive cruise control with emergency brake assist * Lane keeping assist * Electric exterior mirrors. adjustable and heated * Electric windows * Automatic air conditioning * Auxiliary heating * Sleeping bed * Cool box * Air-suspended comfort seat for driver * Transparent sun visor * Fog lights * Air horn on roof * 2-part sun blind, mechanically extendable * Driver's seat heating * On-board computer * Multifunction steering wheel * Mechanical roof hatch * Driver's door sun blind, mechanically extendable * Radio * AdBlue right side * Duomatic * Body: Kässbohrer Dimensions of loading area: Length: 5,500 mm Width: 2,450 mm Height: 2,200 mm Tires: * Front axle: 225/75 R 17.5 leaf spring / 35% * Rear axle: 225/75 R 17.5 air spring / 50% ----Price: 23,900 euros + 19% VAT If you have any further questions, you can contact us at the following numbers: * We speak: German, English, French, Polish and ????? Dkjlq Igov N Achoi Rel Subject to typos, errors and prior sale.

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm turning diameter 220 mm chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min Dolq Ievxltuegi Rokl tail stock automatisch

Condition: new, Year of construction: 2025, Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m³/6bar, filling water: 9m³/h, rinsing water: 3m³/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Dkelqsv Nlais Igi Rjl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling); film width: 130-510mm; max. speed of the machine in neutral: 180 cycles/minute; stainless steel; 380V/9.0kW; 6bar, 0.25m³/min; machine dimensions: L1700xW1300xH1700mm; weight: 700kg. Delq Igev Nmydei Rjkl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, Condition: new, Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling); film width: 170-560mm; max. speed of the machine in neutral: 180 cycles/minute; stainless steel; 380V/7.5kW; 6bar, 0.25m³/min; machine dimensions: L1500xW1200xH1620mm; weight: 700 kg. Dkslq Igijv Nmyks Rsl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.