Used Gesan Dps 100 for sale (40,098)

Condition: like new (used), Functionality: fully functional, Year of construction: 2019, Forklift battery 48V 5PzS700 Battery 100% TESTED Deliqyjv Ic Ihjp Tokl Year of manufacture: 2019 Dimensions (lxwxh): 830mmx630mmx785mm Weight 1118kg Battery was serviced and tested by a specialist company. Capacity test (C5 discharge test) 777/700 Ah battery Remaining capacity: 100% percent+ With Aquamatik filling system (BFS) With pole screws but WITHOUT end discharge

Condition: used, Year of construction: 1990, pressure 100 t throat 400 mm stroke 10 - 100 mm ram strokes 100 Hub/min Dkoliqsvtgv Tjyp Tel ram adjustment 60 mm

Condition: used, Year of construction: 2009, operating hours: 1,550 h, load capacity: 1,000 kg, lifting height: 2,000 mm, fuel type: electric, construction height: 1,900 mm, gearing type: other, overall weight: 490 kg, empty load weight: 440 kg, total length: 1,800 mm, color: red, mileage: 1,550 km, first registration: 12/2009, suspension: other, driver cabin: other, emission class: none, fuel: electricity, The BT HWE 100 is a used electric high lift truck with a 24V Dkolisr Uzbmeqyp Tjl battery type 2 EPzV 160 that lasts until November 2024. This truck is ideal for internal transport in confined spaces thanks to its compact design with a height of 1,900 mm, a width of 720 mm and a length of 1,800 mm. With a permissible total weight of 490 kg and a red color scheme, it is both functional and visible. It was first registered on December 16, 2009 and has since accumulated 1,550 operating hours. Despite its years, it is well maintained as it has only had one previous owner. The electric drive makes it particularly low-maintenance and environmentally friendly as no exhaust gases are produced during operation. There are additional service options for registration and delivery within Germany, and viewings are possible from Monday to Saturday on site in Rohrbach (Palatinate). Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 143151, warranty duration: 6 months, Model: AQUAMIX Reference: SPI 280 AQ Sold with a bowl Removable bowl Bowl and spiral entirely made of stainless steel Max Flour Capacity: 100 kg Max Dough Capacity: 160 kg Bowl Capacity: 280 L Electrical Power: 14.5 kW Power Supply: 400 V / 50 Hz Year of Manufacture: 2006 Touch control panel, with integrated PLC Frequency inverter Equipped with two motors: one for the bowl and one for the spiral tool Chassis coated with anti-corrosion epoxy paint -Touch control panel, with integrated PLC, allows you to store your recipes (up to 99) and production schedules. Maintenance assistance is also available. Doliqotuk Dkjyp Tokl -The Aquamix mixer has been specially developed by VMI for working with highly hydrated doughs. Featuring a flat-bottomed bowl, an elongated spiral with a half-turn, and a round pivot with scraper, the Aquamix kneads without sticking, at a very fast pace, doughs rich in water, which correspond to the latest successful productions. -Frequency inverter: Kneading dough varies depending on its moisture percentage. The Aquamix, equipped with a frequency inverter, offers greater work flexibility and allows you to customize your recipes for rustic breads and Chapatis.

Condition: ready for operation (used), Year of construction: 1962, Functionality: fully functional, Used Weingarten P 100 screw press Doliqysvuqlbop Tokl Pressing force: 80t Table: 350 x 400 mm Stroke: 80 - 250 mm Stroke rate: 45 min-1 Installation space: 400 mm

Condition: new, Year of construction: 2025, Automatical capsule filling machines SPT-Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to #000,5. The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The capsule filling machine SPT-FH100 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 14 psc/h; Max.production quantityof capsules - 110 000 psc/h; Weight of machine - 2 500 kg; Dsliqyody Dywjp Tokl Space consumption - 1650 x 1650 x 2030 mm

Condition: new, controler for resistance weldingmachines Dalex MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 Dkelopbbyuoiqyp Tel --- MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1 --- MPS 300multiR1 available from stock

Condition: ready for operation (used), Nippon Gerotor 100-2PC-2AH0-HL Index Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Djliqyoi D I Uvsp Tekl

Condition: used, Year of construction: 2013, operating hours: 1,455 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,900 mm, gearing type: other, overall weight: 730 kg, empty load weight: 515 kg, total length: 1,800 mm, color: red, mileage: 1,455 km, first registration: 09/2013, suspension: other, driver cabin: other, emission class: none, fuel: electricity, The BT HWE 100 Elektro is a used high lift truck, ideal for internal transport. With a load capacity of 730 kg and a lifting height of 1,900 mm, it is both compact and powerful. The truck is in a vibrant red and was first registered in September 2013. The low mileage of 1,455 kilometers and just as many operating hours underline its well-maintained condition. This electric high lift truck is an efficient tool for industrial applications. The compact dimensions of 1,800 mm in length and 720 mm in width make it maneuverable and suitable for narrow aisles. As an electric vehicle, it offers environmentally friendly operation and is low-maintenance. Dkjliqer Uzbisyp Tsl A registration service and various loading options are offered, with delivery within Germany possible for an additional charge. To find out more details, we recommend contacting the seller. Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm Dkeliqovwgpujyp Tjl y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: used, Year of construction: 2013, sheet width 2100 mm Dkoliqypsvrq Uwj Tsl plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm blade length 2110 mm no. of strokes 34 Hub/min back stop - adjustable max. 735 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 5.0 kW weight 1750 kg range L-W-H 2600 x 1900 x 1250 mm Machine from a maintenance workshop good condition (!!) Equipment: - robust electro-mechanical sheet metal shears - heavy / robust drive motor - manual back stop, including analog position display * Adjustment range max. 735 mm * Adjustment from the front using a handwheel - 1x table side stop - 2x front support arms - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating unit - front left - rear safety device (grid enclosure) Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Description Digital display (3 axis) Technical data: Clamping surface 1100 x 300 mm Longitudinal travel 700 mm Dkjliqye Twi Hop Tol cross travel 250 mm Vertical travel 470 mm Spindle speeds 45 - 2000 rpm. ISO 40 mounting 12 milling feeds Longitudinal and transverse 18 - 800 mm/min. vertical 7,2 - 320 mm/min. Drive motor of the milling spindle 7 PS Drive motor of the table 1,5 PS Machine weight approx. 2050 Kg

Condition: refurbished (used), machine/vehicle number: 153122, This 45kW Loher powered Alpine Rotoplex B40/100RO has undergone a full rebuild and has not been used since. The rebuild includes final settings by the Manufacturer at their works in Augsburg. Additionally the opening mechanism has been upgraded to elektro-hydraulic. Dkoliqeivathoyp Tsl

Condition: ready for operation (used), Baumüller GSF 100-S servo motor , serial no. according to photo , hole spacing of mounting holes: 151 x 151 mm, Ø drive shaft: 32 mm ,used, strong traces of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dslji D E Eleiqyp Tokl

Condition: used, Year of construction: 2013, operating hours: 1,553 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,900 mm, gearing type: other, overall weight: 730 kg, empty load weight: 515 kg, total length: 1,800 mm, color: red, mileage: 1,553 km, first registration: 09/2013, suspension: other, driver cabin: other, emission class: none, fuel: electricity, The BT HWE 100 Elektro is a used high lift truck, ideal for commercial applications. It was first registered on September 12, 2013 and has a mileage of 1,553 kilometers or operating hours. This model is in striking red and is electrically operated. With a height of 1,900 mm, a width of 720 mm and a length of 1,800 mm, it is compact yet functional. The permissible total weight is 730 kg, which is sufficient for many operational requirements. Inspections are possible without registration, which offers interested parties a flexible planning option. Additional services such as loading and registration services can be used. Delivery within Germany is possible for an additional charge. Dkjlijr Uzbbsqyp Tol Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Dslst Ixkzoiqyp Tokl Maximum Inlet Wire's Diameter: 30 mm

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, retraction force: 100 t, Equipment: safety light barrier, H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 200 TON H TYPE SERVO HYBRID HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 200 TONS CAPACITY (POT) 100 TONS MAIN TABLE SIZE 1000 x 800 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 600 mm Dkeliqev D Rv Eeyp Tjl STROKE (POT) 200 mm MIN. OPENING HEIGHT 200 mm MAX. OPENING HEIGHT 800 mm STRESS RELIEF after WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar MOTOR POWER 30 kW – HAWE – SERVO MOTOR FREE FALLING SPEED 150 mm/sec. PRESSING SPEED 15 mm/sec. ASCENDING SPEED 200 mm/sec. RAM CYLINDER DIAMETER Ø 320 mm – Ck45 POT CYLINDER DIAMETER Ø 230 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 4400 mm PRESS DEPTH 1800 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1150 mm ENGINE Protection Class IE3 PRESSURE FILTER PARKER USED VALVES HAWE FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATION ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL PLC SIEMENS S71510 TOUCHSCREEN PANEL SIEMENS KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS PILZ– 2 pc. APPROXIMATE WEIGHT 10 TONS

Condition: excellent (used), Year of construction: 2017, operating hours: 364 h, USED KARCHER SWEEPER KM 100/100 R YEAR OF MANUFACTURE 2017 364 working hours TECHNICAL DATA: - Theoretical capacity (m2/h) 6000 - Working width (mm) 700 - Working width with 1 side brush (mm) 1000 - Waste tank (l) 100 - Working speed (km/h) 6 - Weight (kg) 350 - Dimensions (L x W x H) (mm) 2006 x 1005 x 1343 EQUIPMENT - Round polyester filter - Automatic filter cleaning - Travel drive, hydrostatic - Oscillating roller brush - Adjustable suction power - Large debris flap - Forward sweeping method - Driving forward - Rearward travel - Suction system - For indoor as well as outdoor use - Operating hour counter - Sweeping function (can be switched off) LARGEST SELECTION IN POLAND !!! WE PROVIDE WARRANTY! DELIVERY UP TO 100 KM FREE OF CHARGE ! We offer: - a large selection of washers of this model, in technical condition as well as visually very good Dkoliqjuf Nk Seyp Tsl - we provide warranty on purchased equipment - we have warranty and post-warranty service - possibility of transport - possibility of shipping the washer by courier Why is it worth to buy the device in BUBU-KAR? Buying machines in our company you are sure that the equipment is in working order, because all machines are serviced by our specialized technical department. You do not have to worry about spare parts, because we have a wide range of spare parts on sale, more than 4 thousand items. Our advantages: - large selection - professionalism - flexibility - knowledge and experience

Condition: ready for operation (used), Nippon Gerotor 100-2PC-2AH0-HL Index Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Dksliqypei D I Uyj Tel

Condition: ready for operation (used), Baumüller GSFG 100-S servo motor , serial no. according to photo , hole spacing of mounting holes: 150 x 150 mm, Ø drive shaft: 32 mm ,used, strong traces of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkjliqyei D E Ewop Tol

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Mainspindle Drive, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Dsliqei Ebgyjyp Tekl

Condition: ready for operation (used), Heat sink with 6 pcs. Fuji Electric 1DI300G-100 from Siemens 6SC6115-5VA01 E/R module ,used, good condition, 100% working, scope of supply acc. photos Djliqypji Ebw Ee Tjkl

Condition: ready for operation (used), Parker PRM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% functional, scope of delivery acc. photos Doliqji Ecc Rsyp Tokl

Condition: ready for operation (used), Parker PRPM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% working, scope of supply acc. photos Dsliqyei Ecc Uep Tskl

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Dkjliqei Ebhhjyp Tel