Used International 856 Xla Turbo for sale (10,551)

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Duolqyertryyoliwot Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Duslouzlltoqyliwjt Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Pos. 3: Mechanical cross slide, Turret open Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Duolqyewhwhbeliwet Control: DECKEL DIALOG 4 Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: used, mileage: 271,000 km, Year of construction: 2020, Field of application: Freight transport Serial number: WV3ZZZSZZL9046938 Please contact ATS Norway AS for more information Please provide reference number upon request: 19978 Specifications: - Km: Approx. 271,000 - Transmission: Automatic - Euro 6, 177 hp - Okay tires - 4x2 - 2 x side doors - Zepro lift, 750 kg - 3 seats - 8 pallets - Internal length: Approx. 4.38 m - Internal width: Approx. 2.1 m - Internal height: Approx. 2.09 m - Radio/CD - Air conditioning/AC - Ready for delivery - Videos Description: 2020 Volkswagen Crafter with 8 pallet box truck. The left rear wheel bearing, front brake pads, rear brake discs and pads have been replaced.++ Ready for delivery Km: 271000 HK: 177 Technical approved: Yes Duelqylov U R Ntsiwjt EU-approved until: 02.09.2026 Own weight: 2740 Total Weight: 3500 Payload: 685 Width: 220 Length: 710 Euro: 6 Gearbox: Automatic

Year of construction: 1997, Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum load 280kgs, maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Dujlqeiwyr Aoyliwjt Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: excellent (used), Year of construction: 2019, operating hours: 11,908 h, Functionality: fully functional, machine/vehicle number: 12710008623, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 20,000 rpm, table load: 1,500 kg, The DMG MORI DMU95 monoBLOCK is one of the most accurate, reliable and flexible simultaneous 5 axis milling machines available on the market. The machine has a trunnion style table with a large working envelope to machine components up to 950mm diameter and over 1,000Kg maximum load on the table. This DMU95mb built in 2019 is in very good condition and working order due to its low spindle running hours, and has a comprehensive specification perfect for machining Aluminium or harder materials such as Titanium or Inconel. Djlsv Dg U Deqyliwjut The machine is available immediately for collection and includes our logistics services to provide you with delivery, install and export licence if required. Specification - Basic Machine - DMU 95 monoBLOCK Universal Machining Centre Control - Siemens 840D with CELOS, 21.5" ERGOline Touch Screen Travel - 950 mm x 850 mm x 650 mm / 37.4 in x 33.5 in x 35.6 in Motor spindle - speedMASTER® 20,000 rpm / 35 kW / 46.9 hp (40% duty cycle) / 25 kW / 33.5 hp (100% duty cycle) Spindle taper - HSK A63 to DIN 69893 Chain magazine - 60 magazine pockets / Tool change system double gripper NC swivel rotary table Table plate C-axis: d 850 x 750 mm / 33.4 x29.5 in, integrated in rigid table 1,000m x 750 mm / 39.4 in x 29.5 in MPC Machine Protection Control Production Package - Scraper flight conveyor with coolant unit 600 l / 160 gallon Paper band filter Discharge height: 950 mm / 37.4 in / Width: 970 mm / 38.2 in Internal coolant supply - 40 bar / 23 l/min / 580 psi / 6 gpm, through spindle centre (AD) External coolant supply - 4 bar / 58 psi - 40 l/min 10.4 gpm Spray Pistol Oil and emulsion mist separator Renishaw OMP60, infrared measuring probe Blum laser tool measuring 3D quickSET Kinematics kit Electronic Handwheel Screen Display - English

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Duslqyliertrzdewst Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, net weight: 20,000 kg, Roller conveyor type G with Titan blastwheels For profiles, plates, rolls, tubes... max entrance width: 1100 mm max entrace height: 550 mm 4 turbines, each 11 kW working speed: 1,4 2,4 m/min Delqyjwikatjliwsut Total power: 62kW Installed on top of floor, no foundation needed! Including a large selection of new spare parts worth in excess of 80 000€!

Condition: used, Field of application: Internal logistics Serial number: B3A2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19880 Specifications: - 5395 Hours - 4500 kg - Lifting capacity of 3000 kg - Repair item - Ready for delivery Description: We have a Hyster H60F Gas truck Repair item for sale. The forklift is a Repair item as it is hanging on the clutch. Apart from this, it works as it should. Dujlsv U Stajqyliwot But some additional costs must be considered. Ready for delivery

Condition: used, Used Matcon approximately 1,000 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 500mm deep with a 500mm deep conical bottom. Unit mounted on forkliftable base. Includes internal discharge cone. Dolqyjun Syveliwout

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Dsljrtrxisqyliwout Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Year of construction: 2018, Serial number: YF1S3HWL2HF03xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19763 Specifications: - 2018 model - 3 axles - Lift on 1 axle - Full side opening - Tires (see pictures) - Internal width: 2,490 m - Internal height: 2,849 m - Internal length: 13.439 m - Ready for delivery Description: Narko 3-axle semi-trailer that can be put straight to work. Some errors and shortcomings may occur as the trailer is from 2018. Ready for delivery Technical approved: Yes EU-approved until: 30.06.2025 Dolqylijv U Tdgowsut Own weight: 8990 Total Weight: 42000 Payload: 33010 Width: 260 Length: 1380

Condition: like new (used), Year of construction: 2000, Used Kemutec Kek model 200 EC Stainless Steel Jacketed Ribbon/T-Arm Mixer. Has approximately 200 litre working capacity and 215 litre total capacity. Mixing trough approximately 565mm diameter X 860mm long. Has hinged lid and end cover. Internal rated atmospheric pressure at 50 degC. Cantilever design with bolted double ribbon mixing blade belt driven by 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 reduction ratio at approximately 53 rpm. Includes spare double ribbon and t-arm mixing blades. Has provision for chopper but none fitted. Includes centre bottom discharge with valve. Has stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. Mounted on mobile base. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Duelqylioiwytcjwet

Condition: used, mileage: 280,377 km, Year of construction: 2018, Serial number: VF640J560JB00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19765 Specifications: - 2018 model - 280377 km - Automatic transmission - Euro 6 engine - 245 hp - 7.5 tons - Tires (see pictures) Duolqsv U Scneyliwjt - Internal width: 2,463 m - Internal height: 2,502 m - Internal length: 6,492 m - Service history - Diesel heater - Heating in cabinets - Air conditioning/ac - Radio - Light - Ready for delivery Description: We are selling a Renault D7.5 4x2 box truck with heating in the box. The truck has a full service history and can be documented. Everything works as it should, according to the owner. Ready for delivery Km: 280377 HK: 245 Technical approved: Yes EU-approved until: 19.09.2025 Own weight: 5770 Total Weight: 7490 Payload: 1645 Width: 255 Length: 842 Euro: 6 Gearbox: Automatic

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. Duolqyotz Thbjliwst External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs.

Condition: used, mileage: 258,000 km, Year of construction: 2016, Field of application: Freight transport Serial number: WDB9061351N675445 Please contact ATS Norway AS for more information Please provide reference number upon request: 19817 Specifications: EU approved until: 22.12.2026 Model year: 2016 Mileage: Approx. 258,000 km Gearbox: Automatic Tires: See pictures Lifting capacity: 750 kg Side door Internal length: Approx. 436 cm Internal height: Approx. 201 cm Seating capacity: 3 seats Total length: 705 cm Total width: 218 cm Wheelbase: 432 cm Net weight: 2,600 kg Delqylsv U Sdreiweut 4x2 Engine power: 163 hp Radio/CD player Air conditioning/AC Description: Mercedes Sprinter box van from 2016 with side door and 750 kg lifting capacity. The car has covered approx. 258,000 km and is EU-approved until 22.12.2026, ready to be put into operation. The truck can be delivered at short notice. Km: 258000 HK: 163 Technical approved: Yes EU-approved until: 22.12.2026 Own weight: 2600 Total Weight: 3500 Payload: 825 Width: 218 Length: 705 Euro: 5 Gearbox: Automatic

Condition: used, Used Stainless Process Systems approximately 50 litre (13 US Gallon) stainless steel vertical reactor. Unit measures approximately 500mm diameter x 300mm straight side. Unit has welded dished bottom and clamped dished top head. Internal originally rated 75psi (5.17bar) maximum allowable working pressure at -20 to 350 deg.f. (-28 to 176 deg.c.) Unit re-rated in 2015 to 100psi (6.89bar) maximum allowable working pressure at 350 deg.f. (176 deg.c.). External stainless steel jacket rated 90psi (6.20 bar) / full vacuum maximum allowable working pressure at 350 deg.f. (176 deg.c.). Unit has bottom entry Steridose magnetic coupled agitator driven by Baldor 0.37hp, 1730rpm electric motor. Unit includes local control panel. Mounted on mobile stainless steel trolley. Duolqeun S Hpsyliwst

Condition: used, mileage: 318,000 km, Year of construction: 2012, Serial number: WDB9061551N53xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19770 Specifications: - 2012 model - Km: approx. 318,000 - Manual - Tires (see pictures) - 3 seats - Length: 700 cm - Width: 220 cm - Wheelbase: 432 cm - Curb weight: 2,960 kg - Internal height: approx. 211 cm - Internal length: approx. 434 cm - 4x2 - 163 hp - Side door both sides - 750 kg Zepro lift - Rear view camera - light in the box - Some rust, shown in pictures - Radio/CD - Air conditioning/ac Description: Mercedes Sprinter from 2012 with Zepro lift and side door both sides. Brakes were replaced in 2024 and the alternator was replaced a few years ago. It is ready to be put into operation. There is some rust, shown in the pictures. Can be delivered within a short time. Watch video. Km: 318000 HK: 163 Technical approved: Yes EU-approved until: 22.05.2026 Own weight: 2960 Total Weight: 5000 Payload: 1965 Width: 220 Length: 700 Euro: 4 Delqylov U R Sujiwout Gearbox: Manual

Condition: used, Used Bibby approximately 3,00 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1,980mm tan to tan x 1,400mm diameter. Unit has welded dished top and bottom heads. Internal rated 3.61 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-set 2-tier, 3-blade agitator with Lightnin model LS150 drive. Unit is mounted on side supports. Delqyljun Sw Isiwout

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Dolqysun Sxreliweut

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Djlqyloun Syceiwsut

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Delqyljtz Tgqsiwsut Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs.

Condition: like new (used), Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. Delsgfb Rgsqyliweut External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 4 kw 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Unit requires a mechanical seal and backing plate. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Dujlqyliogcb A Ejwjt Has 321 stainless steel external jacket rated 3.45 bar working pressure. Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Dujlqylegwbbfjiwot Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Driven by 45kw motor/gearbox with new double mechanical seal. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.