Used Bimak 30 Cr for sale (84,563)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Celip Iaswc Nvgs Rjgt Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, MGF100TF-30, SMC Pneumatic Compact Cylinder/Guide Table Cgslipsrfb Tvo Ia Rjt Model: MGF100TF-30 Condition: Used

Condition: ready for operation (used), Bosch VMA 70 CR 001-D supply module 1070070783-507 SN:003253676, used, normal signs of use, 100% functional, scope of delivery as per photos Cslok Hd I Ejip Ia Regt

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min Colijv Skzdop Ia Rsgt total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: used, overall weight: 30,000 kg, maximum load weight: 20,500 kg, axle configuration: > 3 axles, loading space length: 8,400 mm, loading space width: 2,500 mm, first registration: 09/2017, Year of construction: 2017, Equipment: ABS, Manufacturer MTDK Model 4 Achsen 30 t. Maschinen Hydr. rampen Cjlip Iaswg Ny To Regt Year 2017 Condition Good Serial Number UMTP444MT6AMT3918 Ref. nr. 7840 Reg. date: 27-09-2017 Last seen: 20-09-2024 Drum brake: ? ABS: ? Axles: SAF Suspension: Air Tire Size: 245/70R17.5 Cover% left 40 - 40 - 40 - 40% Toolbox: ? Total weight: 30000 kg. Net weight: 9500 kg. Load capacity 20500 kg. Inside length: 8400 mm. Internal width: 2500 mm.

Condition: good (used), Functionality: fully functional, sheet thickness steel (max.): 8 mm, roller (top) diameter: 240 mm, roller diameter: 260 mm, overall weight: 7,400 kg, total length: 4,800 mm, total height: 1,000 mm, total width: 1,400 mm, roller (bottom) diameter: 260 mm, working length: 3,050 mm, roller length: 3,050 mm, Equipment: documentation/manual, Bending length: 3.050 mm Pre-bending: 8 mm Rondbuigen: 10 mm Top roll: Ø 240 mm Lower rolls: Ø 260 mm Featured with: - Hydraulic drop end - Digital readout on lower rolls - User manual Country of origin: Italy Motor power: 11 kW Machine LxWxH: 480 x 140 x 100 cm Machine weight: 7.400 kg Celip Iowchm Dea Regt

Condition: used, axle configuration: 2 axles, loading space length: 7,340 mm, loading space width: 2,350 mm, loading space height: 2,190 mm, first registration: 04/2011, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 7,400 mm, Year of construction: 2011, Equipment: tail-lift, General information Model year: 2025 Cgslip Iaswg D Hze Rot Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: ROR Brakes: drum brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 70%; Tyre profile right: 70% Measures Dimensions (LxBxH): 1050 x 255 x 375 cm Weights Empty weight: 7.160 kg Carrying capacity: 10.840 kg GVW: 18.000 kg Functional Tail lift: Dhollandia DHSMR.20, slider lift, 1500 kg Make of bodywork: Brinks Carrosserie Carrier Supra 950 U MT Cooling engine: diesel (973 operating hours) Wall thickness: 50 mm

Condition: like new (used), Year of construction: 2005, operating hours: 1,491 h, fuel type: electric, lifting capacity: 3,000 kg, Manufacturer + model: STILL EGU 30 ID:25050.3089 Cat.:Used Forks:1200 x 560 mm Cslipjwg H Dpe Ia Rjgt Capacity:3000kg Year:2005 Hours:1491 hours Capacity:24v / 375ah

Condition: excellent (used), Year of construction: 2006, Horizon HT-30 Three-Side Trimmer Standalone (offline) trimmer featuring Horizon’s touch & work technology for intuitive operation. Trimming process: Fully automatic, processes up to 10 books simultaneously. Dual-direction knife movement ensures clean, damage-free cuts. Conveyor system: Includes a stack tray for neatly collecting trimmed books. Job memory: Stores up to 40 repeat job settings for efficient recall. Cgolipewhmmto Ia Rjt Adjustment: Precise trimming control via touchscreen interface. Built for long-term durability and designed to occupy minimal floor space. Ideal for small to medium production runs. Book size (untrimmed): • Max: 320 × 235 × 51 mm • Min: 152 × 136 × 1 mm Book size (trimmed): • Max: 305 × 230 × 51 mm • Min: 148 × 134 × 1 mm Trimming range: • Max: 99 mm • Min: 2 mm Pre-stack capacity: 300 mm Maximum speed: 520 books/hour Clamping pressure: Up to 8 kN Noise level: Max. 70 dB Machine dimensions: 2,350 × 1,160 × 1,370 mm Power supply: 400 V / 50 Hz, 1.25 kW Weight: 1,020 kg

Condition: excellent (used), 079 USED SP 30 L. Mixer with fixed bowl. TECHNICAL DATA: - capacity 45 kg of dough, - 30 kg of flour. EXTERNAL DIMENSIONS (in cm.): - W: 60, - L: 114, Cgjliowf I Slep Ia Rot - H: 113 BOWL DIMENSIONS (in cm.): - W: 60, - H: 35 - internal width 56. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 30working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  Cjlip Iasr I H A Hj Regt - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: reconditioned (used), Functionality: fully functional, DGUV certified until: 06/2026, year of last overhaul: 2025, Spiral Mixer Kemper Model: ST 30 Dough machine with 2 speeds For min/max 5-45 kg dough Flour dust hood, 2 timers Stainless steel bowl and spiral Bowl running on the left and right Mobile machine with locking device DGUV V3-certified Weight 345 kg Connection: 400V, 4 kW, 16A-CEE plug Dimensions: 600 x 1010 x 1220/1600 mm, W x D x H Used machine, overhauled 3-month warranty + spare parts service Options: Maintenance contract Service package E-box Cgjlipjvyb Evs Ia Rst Instruction & commissioning Leasing & rental service Visit our bakery equipment exhibition!

Condition: used, Functionality: fully functional, machine/vehicle number: 0584, Year of construction: 2018, operating hours: 24,509 h, load capacity: 3,000 kg, lifting height: 3,170 mm, fuel type: electric, mast type: duplex, construction height: 2,275 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0584 Mast type: Duplex Transmission: Automatic Technical condition: very good Celiswg Nkrop Ia Regt Double pallet fork,

Condition: used, axle configuration: 3 axles, first registration: 01/2018, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2018, Tire size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Cgolip Iaewgqu Eo Rst Suspension: Air suspension Rear axle 1: Left tire profile: 18 mm; Right tire profile: 10 mm Rear axle 2: Left tire profile: 11 mm; Right tire profile: 14 mm Rear axle 3: Left tire profile: 13 mm; Right tire profile: 11 mm Damage: None

Condition: excellent (used), mileage: 283,612 km, power: 345 kW (469.07 HP), first registration: 10/2011, fuel type: diesel, color: other, axle configuration: 8x4, tire size: 385/65 R22.5, fuel: diesel, wheelbase: 6,420 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - Aluminum fuel tank - Climate control - Power windows - Fog lights - Radio/CD player - Power side mirrors - Sun visor - Digital speedometer - Power take-off (PTO) = Additional Information = General Information Cabin: Single License plate: BZ-NH-83 Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Axle configuration Brakes: Disc brakes Suspension: Leaf spring Front axle 1: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Steered; Left tire profile: 50%; Right tire profile: 50% Front axle 2: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Steered; Left tire profile: 10%; Right tire profile: 10% Rear axle 1: Tire size: 315/80 R22.5; Max. axle load: 11,500 kg; Left tire profile: 40%; Right tire profile: 40% Rear axle 2: Tire size: 315/80 R22.5; Max. axle load: 11,500 kg; Steered; Left tire profile: 40%; Right-hand tire tread: 40% Dimensions Dimensions (L x W): 890 x 255 cm Weight Unladen weight: 15,265 kg Payload: 27,735 kg GVW: 43,000 kg Functional Body brand: Hyva Lift 3065 S Maintenance General technical inspection (AIT): inspected until October 2025 Cgjlip Iajwgy Dij Ret Condition Technical condition: very good Visual condition: very good Damage: none

Condition: good (used), Year of construction: 1979, Functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, total length: 6,500 mm, total width: 3,500 mm, total height: 2,900 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, - Operating voltage: 380 V - Frequency: 50 Hz - Connected load: 25 kW - Spindle speed: 50 – 3,000 rpm - Center height above table: 240 – 1,040 mm Cgjliewdnzkop Ia Rjt - Table dimensions: 1,050 x 1,050 mm - Feed: infinitely variable - Feed rate: - Row 2: 18 – 160 mm/min, 35 – 320 mm/min - Rapid traverse speed: 3.5 m/min - Rated motor speed: 1,400 rpm - Drilling depth: up to approx. 1,200 mm EQUIPMENT: - 3-axis digital display from Heidenhain - Coolant system included

Condition: excellent (used), power: 55 kW (74.78 HP), Year of construction: 2018, operating hours: 3,386 h, Field of application: Construction Empty weight: 6.650 kg Make of engine: Volvo Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DE Please contact Nedtrax B.V. for more information Volvo L30G Year: 2018 Reading hours: 3386 H Weight:6650KG 55.4KW Made in Germany 1/4 Bucket Cgolip Iaewg Anqe Rot forks Hydraulic Quick Coupler CE-MARKED In good condition

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: 57 76 F-552, Condition: Very good condition Cjlip Isu Hyxxsa Rogt

Condition: used, Functionality: fully functional, machine/vehicle number: 0191, Year of construction: 2019, operating hours: 6,101 h, load capacity: 3,000 kg, lifting height: 4,890 mm, free lift: 1,490 mm, fuel type: diesel, mast type: triplex, construction height: 2,275 mm, power: 36 kW (48.95 HP), fork length: 1,200 mm, drive type: Diesel, Diesel Forklift VIN: 0191 Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Superelastic Rear Tires Type: Superelastic Colipjwg Nhkj Ia Rsgt Sideshift, 3rd Valve, 4th Valve, Roof Cover, Full Cabin

Condition: excellent (used), Functionality: fully functional, overall weight: 36,000 kg, empty load weight: 6,120 kg, maximum load weight: 29,880 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,270 mm, loading space height: 1,480 mm, loading space volume: 26 m³, first registration: 04/2017, next inspection (TÜV): 04/2026, suspension: full air, color: silver, tire size: 385/65 R22,5, Year of construction: 2017, machine/vehicle number: WLASKA339HWF66817, Equipment: ABS, For sale is an SKA 24/30 aluminum tipper trailer from Langendorf. The trailer has a lift axle and a roll-top tarpaulin. The aluminum body is insulated, including the floor. Trailer equipment: -Registration date: April 4, 2017 -General vehicle inspection: April 2026 -VIN: WLASKA339HWF66817 -1st axle tires: 385/65 R22.5, tread depth: 30%, suspension: pneumatic -2nd axle tires: 385/65 R22.5, tread depth: 30%, suspension: pneumatic -3rd axle tires: Tires: 385/65 R22.5, Tread depth: 60% Suspension: Air -BPW axles -Lift axle -Drum brakes all around -Rear work lights Trailer is ready for immediate use Offer subject to change without notice, typing errors, changes, mistakes, and prior sale. Financing available upon request. Celip Iaowhc Due Rsgt We are also happy to arrange customs clearance for you. Opening hours: Mon.-Fri. 8 a.m.-1 p.m. or by appointment. Invoice with VAT will be issued upon sale. Price is NET/subject to negotiation Vehicle location: Im Gewerbepark 11 99441 Umpferstedt

Condition: new, INA KUSE 30 L W1 G3 V1/700-30/30 ball monorail guidance system, set = 2 pieces, unused in original packaging, 100% functional, scope of delivery according to photos Cslipji Ec Hae Ia Rsgt

Condition: new, Year of construction: 2024, Functionality: fully functional, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled Cjlip Iajunh Hro Rjgt - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: excellent (used), Self-loading press for gluing Orma LS/CA/HF 30/13 Working length 3000mm Working width 1300mm Automatic loading 6 side clamps Cgjlipovxib Ns Ia Rot Shelf mounted on 6 pistons CE certificate

Condition: used, Functionality: fully functional, Year of construction: 2002, operating hours: 3,330 h, load capacity: 3,000 kg, lifting height: 6,010 mm, free lift: 1,800 mm, mast type: triplex, construction height: 2,660 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,650 mm, net weight: 5,500 kg, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Sideshift, 3rd valve, rear working lights, front working lights, full free lift, twin tires, Cgslipevc I T Se Ia Rjt

Condition: used, Functionality: fully functional, Year of construction: 2005, operating hours: 5,510 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,300 mm, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,440 mm, net weight: 4,900 kg, LPG forklift Cgslip Iaevc I Ucs Rjt Load center: 500 Mast type: Triplex Technical condition: normal Front tires type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, full free lift, twin tires,