Used Bimak 45 Ac/M for sale (138,321)

Condition: new, Year of construction: 2020, • CE certificate by a Notified Body. • Can be installed behind the palletSaw. • One employee dismantles and the second employee can do the cross cutting. • Five pre-set board lengths. • Adjustable cutting speed. Dcolqjcvm Epoxrlaog • Easy installing without any special facility. • Boards can be sorted by length on a not motorized sorting rack.

Condition: used, mileage: 723,120 km, power: 331 kW (450.03 HP), first registration: 04/2018, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Lane departure warning system Dimensions and weights: Total weight: 18,000 kg / 19,000 kg Empty weight: 8,777 kg Permissible weight of the set: 45,000 kg / 65,000 kg Wheelbase: 3750 mm Aluminium tank: 750 + 500 l 2x seat, 2x bed, without sunroof, electrically operated windows, electrically operated rear-view mirrors with heating, electrically operated sunroof, central locking with remote control, Dcjlqxsvu Nuhsrlaog refrigerator, immobilizer, radio with navigation, digital tachograph, comfortable driver's seat Exterior: sun visor, complete set of spoilers, fog lights Tires: 1st axle: Cordiant 385/65 R 22.5 2nd axle: 315/70 R 22.5

Condition: good (used), Functionality: fully functional, machine/vehicle number: 2374, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: OKUMA, controller model: OSP-U10M, workpiece weight (max.): 50 kg, table width: 460 mm, table height: 750 mm, table length: 1,000 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 7,000 rpm, coolant supply: 10 bar, distance table center to spindle nose: 610 mm, spindle motor power: 14,600 W, spindle nose: BT40, number of slots in tool magazine: 32, tool length: 250 mm, tool diameter: 90 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, power: 22.4 kW (30.46 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Fully operational Deljtr Aw Ssqxrlajcg

Condition: good (used), machine/vehicle number: 2919, Year of construction: 2010, lifting height: 15,200 mm, total length: 12,500 mm, total width: 4,250 mm, operation weight: 82,000 kg, engine type: Diesel, lifting capacity: 45,000 kg, Equipment: lighting, SMV 4531 TB5 from Uniktruck Dcolqxoquwn Eorlaeg

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system Djled Ab Rcoqxrlaecg - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Year of construction: 1990, Condition: used, thread dia. M5 - M10 mm Tools speed 320 - 1600 U/min table-size 330 x 290 mm throat 215 mm voltage 380 V threading length mm total power requirement 0,55 kW weight of the machine ca. 300 Kg dimensions of the machine ca. 1,2 x 0,8 x 2,0 m Djljnq R Uuoqxrlascg Tapping machine including: machine base footswitch vice different tools see pictures

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Dcjlqxet E Nthsrlaeg Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 1998, Condition: excellent (used), Coordinate measuring machine ETALON Derby 454 Measuring range 457x508x406 mm Dolqxrljkvm Txjajcg Dimensions LxWxH 895x885x1575 mm weight approx 220 kg Renishaw TP8 measuring head last calibration 2020

Condition: new, Functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards. Djlqxrevtnfpolaocg

Condition: good (used), machine/vehicle number: 2812, Year of construction: 2011, lifting height: 16,300 mm, mast type: telescope, total length: 13,000 mm, total width: 4,200 mm, operation weight: 78,760 kg, engine type: Diesel, lifting capacity: 45,000 kg, additional equipment features: Centralized greasing system, Equipment: lighting, Kalmar DRF450-65S6X from Uniktruck Dceljquwmkoqxrlajg

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Dslsd Ab Rnoqxrlaocg We have many references!

Condition: new, overall weight: 3,500 kg, loading space length: 4,550 mm, loading space width: 1,790 mm, tire size: 195/50R13C, Low loader construction machinery transporter tandem for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable car trailers such as this INDIGO LF-2 455x179cm. The construction machinery trailer is easy to load via a very stable lattice access flap. An absolute universal trailer not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Dcjlqxetzddgerlasg Full-length and accessible wheel arches make it easier to get out of a wheel loader. The driver no longer damages the mudguard of the car trailer. The machine transporter is equipped with a stable lattice flap, aluminium floor, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, tarpaulin with frame, lashing straps and a lock at a reasonable price.

Condition: used, load capacity: 1,600 kg, lifting height: 4,590 mm, free lift: 1,498 mm, mast type: triplex, construction height: 2,030 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Load center: 600 Mast type: Triplex Technical condition: New Battery Volt: 24V Battery Ah: 375Ah Dslju D Sd Usqxrlaecg Battery year of construction: 2023 -electric steering -button operation on both sides

Condition: used, Year of construction: 2021, operating hours: 150 h, load capacity: 1,450 kg, lifting height: 5,400 mm, free lift: 2,082 mm, mast type: triplex, construction height: 2,362 mm, fork length: 1,200 mm, drive type: Elektro, High lift truck Load center: 600 Mast type: Triplex Technical condition: very good Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2021 Description: New device Dslqxrsu D Rz Selascg

Year of construction: 2023, Condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C Dcolqxrlop T T Hnsajg min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), machine/vehicle number: 3282, Year of construction: 2019, lifting height: 15,000 mm, mast type: telescope, total length: 13,500 mm, total width: 4,200 mm, operation weight: 92,460 kg, engine type: Diesel, lifting capacity: 45,000 kg, Kalmar DRG450-75C5XS from Uniktruck Dcslqoul D Ndexrlaeg

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox Djlqxrsd Ab Snjlajcg - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!

Condition: ready for operation (used), Year of construction: 2002, Vehicle description Diesel Sideloader JUMBO 50/12/45 year 2002 lt. Counter 3.724 hours 5 tons lifting capacity 4,5 meters lifting height 1.2 meters fork length Selling price: 21.950,-- net Doloid R Dnsqxrlaocg Also favorable delivery possible !!!

Condition: good (used), Technical data: Center height: 450 mm Center width: 3000 mm Diameter over slide: 267 mm Spindle bore: 95 mm Speed: 8 - 800 rpm Tailstock taper: 5 Position indicator: NEWALL B60 Motor power: 7.5 kW Dimensions (length x width x height): approx. 6000 x 2000 x 1900 mm Weight: approx. 8 tons Accessories: 4-jaw chuck: ∅ 600 mm Many accessories Delqxrsu Nac Ajlaocg The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: used, Year of construction: 2018, operating hours: 234 h, load capacity: 1,450 kg, lifting height: 4,800 mm, free lift: 1,694 mm, mast type: triplex, construction height: 2,162 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load center: 600 Mast type: Triplex Technical condition: very good Battery Volt: 24V Battery Ah: 210Ah Battery manufacturer: Toyota Battery year of construction: 2018 Battery condition: 80 - 100% Description: Prices are subject to change, ex stock, plus freight and VAT. no warranty/guarantee and no return. Viewing possible by arrangement. Our general terms and conditions apply. 6km/h, hydraulics standard, PIN code drive Friction, support wheel Vulkolan, fork rollers Tandem E-bar, writing console, small item holder with creep speed Drive unit for increased residual load capacity Finger protection grille, without protection bar Lithium-ion Dcslou D Sx Seqxrlaog

Condition: excellent (used), Was used for a ILLIG RDM 70k Hz 50 Dolqxrlou Tfxnoajcg r/min 1445/23 KW 5.5 S1

Condition: good (used), machine/vehicle number: 3141, Year of construction: 2017, lifting height: 15,200 mm, engine type: Diesel, lifting capacity: 45,000 kg, Kalmar DRG450-75C5XS from Uniktruck Dcjlqxjul Dx Eorlasg

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Dslod Ab N Ujqxrlaocg - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 7.000,-- - metarial feeding table EURO 3.700,-- - oil coiler EURO 800,-- - center support EURO 9.500,-- - side supports EURO 10.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Year of construction: 1994, operating hours: 14,385 h, Condition: excellent (used), machine/vehicle number: 8318143 A001, Engine: MTU 16V 396 TB 34 R 1450 kW/DIN 6280, turbocharger with intercooler, electric starter. Generator: A.v.Kaick DIDBN 130/125 i4 1720 kVA, three-phase synchronous generator, Iso.class F/B, flexible coupling and roller bearings Dcslenxky Hsqxrlasg Switchgear: Kuhse EAF FNS-0/0

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- Djled Ab Rhjqxrlajcg - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!