Used Isal Pb55 Et for sale (101,473)

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Dcsb Hehgbf Ejly Tmog Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.

Condition: ready for operation (used), Combined saw and tiller, 310cm. 2 motors Deb Heu Dbarely Tmecg Saw with scorer

Condition: excellent (used), Year of construction: 2016, Contact via WhatsApp or . Falch Trailjet 30, high-pressure water system with 500 bar and 30 liters of hot water. The pump is in excellent condition, new filters, oils, seals, etc. Deb Hly Tsia U Rijmjcg

Condition: new, Metallkraft MSBM 2020-30 PRO Motorized folding machine 3779121 Description: - Powerful and quiet drive via LENZE geared motors with brake - Compact, heavy and stress-free welded steel construction - Sharp bending rail made of C50 tool steel on the clamping beam - Continuous, replaceable bed support made of C50 tool steel - Continuous bending rail made of C50 tool steel on the bending beam - Automatic pressure regulation of the clamping beam via motor current pick-up - Clamping beam drive via generously dimensioned trapezoidal threaded spindles - PT 1 bending angle adjustment via potentiometer on the front of the machine (right) - Manually fine-adjustable bending beam with scale - Manual crowning via pressure screws in the folding beam - Foot remote control with emergency stop function - All moving parts mounted on low-maintenance bearings - Electrical components from Schneider or Omron - SH models with high, segmented goat foot tools - Quality Made in Europe Available on request: DUO models with continuous sharpening rail and segmented fence foot tools, standard hardened tools, hardened sharpening rail and bending bar, hardened segmented tools and bending bar, hardened segmented fence foot tools and bending bar Max. working width: 2020 mm Max. clearance between upper and lower beam: 200 mm Dimensions and weights: Length (product) approx.: 2935 mm Width/depth (product) approx.: 1100 mm Height (product) approx.: 1560 mm Dsb Hstw D Eqely Tmscg Weight (net) approx.: 3050 kg Bending capacity: Bending capacity 400 N/mm²: 3.0 mm Bending capacity 700 N/mm²: 2.2 mm Explanation Bending capacity 700 N/mm²: Optional hardening of the tools is required for bending stainless steel Bending capacity aluminum: 3.6 mm Electrical data: Output power cheek: 0.75 kW Bending output: 3.0 kW

Condition: used, mileage: 905,000 km, power: 220 kW (299.12 HP), first registration: 05/2010, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 05/2025, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Setra 415 NF with 42 seats - Air conditioning - Automatic transmission - Matrix system - Euro 5 - * Diesel - 11,967 cc - 220 kW - 299 hp - Euro 5 - Green sticker - TÜV (German Technical Inspection Association) * 42 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - * Auxiliary heating / Radio / ABS / ASR - Double-width rear door - Single-width front door - * Vehicle dimensions: Length: 11,950 mm x Width: 2,550 mm x Height: 3,400 mm * German vehicle - German vehicle registration document - Sold on behalf of the customer - * Subject to errors, misprints and prior sale - Available immediately - * Please arrange an appointment for a viewing and test drive * Contact person: Andreas Vogel Dcob Hlowcipaey Tmjg * ATTENTION - Vehicles are stored outside the premises - Please inquire about the exact location - ATTENTION -

Condition: good (used), power: 75 kW (101.97 HP), Pellet press 75 kW: 800 kg/h Overhauled by the Nova Pellet factory - main bearing for DIE replaced - cost: €13,000 Dceb Hljvg A Husy Tmeg Original electrical cabinet, Siemens PLC control Additional spare parts: Die and rollers

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm Djb Hshgbgqely Tmscg CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW Dcob Hob Nvimely Tmjg space needed: 470 x 1170 x 1300 mm weight: 210 kg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, cooling capacity: 41 kW (55.74 HP), total height: 2,160 mm, total length: 1,980 mm, total width: 1,250 mm, Rooftop Air Conditioner CLIVET 41 kW Cooling capacity: 41 kW Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Dsbou Snvpj Hly Tmecg Compressors: 2 pcs. Copeland (scroll) Number of fans: 2 pcs. Type of refrigerant: R-134a Dimensions: 1980 х 1250 х 2160 mm Condition: excellent

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Dcsbjfdgi Ho Hly Tmog Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: used, Functionality: fully functional, total height: 3,400 mm, manhole: porte rectangulaire, inner diameter: 3,000 mm, usable tank capacity: 22,000 l, TECHNICAL CHARACTERISTICS Djbev I A Tqo Hly Tmjcg - Temperature-controlled tank - Make : ETA - Total capacity: 22,000 litres - Material : stainless steel ROOF - Closed - Balustrade VIROLE - 1 ladder support bar - 1 complete level tube - 1 tasting tap - 1 rectangular door - 1 partial drain valve with PVC plug - 1 full drain valve with PVC plug - 1 serpentine radiator BOTTOM - flat DIMENSIONS - Diameter: 3000 mm - Height: 3400 mm

Condition: as good as new (ex-display), incl. hydraulic unit Without power chuck Schunk Type: Rota THW +165 -43 CHF 8'250 EUR* Djb Hly Tod Szimjmjcg

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 Dob Hlyshga Sco Tmocg CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, cooling capacity: 383 kW (520.73 HP), type of cooling: air, overall weight: 4,000 kg, total width: 2,340 mm, total length: 4,900 mm, total height: 2,500 mm, Aircooled chiller Clivet WDAT 383 kW Dcsb Hlevbg U Sey Tmjg Cooling capacity: 383 kW Year of manufacture: 2002 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Type of refrigerant: R407C Compressors: 2 pcs. Bitzer (screw) Number of fans: 10 pcs. Dimensions: 4.9 x 2.34 x2.5 m Weight: 4000 kg. Working hours: 11902/17472 h. Condition: Excellent

Condition: new, Metallkraft BMBS 360 x 500 HA-DG Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. Description: -Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. -Designed for industrial use -For sawing e.g. stainless steel, tool steel, hollow sections and solid materials -Saw band drive with low-maintenance, oil-lubricated worm gear -With robust three-phase motor with overload protection -Saw band guide with adjustable carbide plates -With mechanical saw band tensioning and monitoring by microswitch -Cooling system on the saw band guides -With frequency converter as standard for infinitely variable adjustment of the saw band speed from 20 - 100 m/min. -With BRP saw band monitoring as standard Dob Hlyscgz E Ts Tmscg Technical data: Motor power 2.0 kW Speed steps stepless saw band speeds 20 ? 100 m/min saw band dimensions 4780 x 34 x 1,1 mm Footprint (LxWxH) 2900 x 950 x 2270 mm Table height material feed 820 mm cutting angle 650 kg Cutting range 360 mm Cutting range 0° round tube material 250 mm Cutting range 0° round tube solid material 500 x 360 mm Cutting range 0° - rectangle lying 500 x 360 mm Cutting range 0° - rectangle standing 350 mm Cutting range +45° - round tube material 180 mm Cutting range +45° round tube solid material 400 x 180 mm Cutting range +45° - rectangle lying 350 x 360 mm Cutting range +45° - rectangle standing 310 mm Cutting range -60° - round tube material 130 mm Cutting range -60° round tube solid material 310 x 170 mm Cutting range -60° - rectangle lying 200 x 360 mm Cutting range -60° - rectangle standing 360 mm Cutting range -45° - round tube material 180 mm Cutting range -45° round tube solid material 400 x 190 mm Cutting range -45° - rectangle lying 330 x 360 mm Cutting range -45° - rectangle standing 270 mm Cutting range +60° - round tube material 130 mm Cutting range +60° round tube solid material 270 x 320 mm Cutting range +60° - rectangle lying 240 x 360 mm Cutting range bundle - round tube solid material 500 x 220 mm

Condition: good (used), Year of construction: 2003, Functionality: fully functional, cooling capacity: 360 kW (489.46 HP), type of cooling: air, overall weight: 3,720 kg, total width: 2,220 mm, total length: 5,600 mm, total height: 2,000 mm, Aircooled chiller Climaveneta TC/SRAT/LN 360 kW Cooling capacity: 360 kW / 102,4 tons (12/7 — 35°C) Year of manufacture: 2003 Options: Low noise Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Type of refrigerant: R407C Number of fans: 6 pcs. Compressors: 2 pcs. Bitzer (screw) Dimensions: 5.60 x 2.22 x 2.00 m. Weight: 3720 kg. Working hours: 143/8741 h. Condition: Good Dsb Hlyevbhhts Tmjcg

Condition: new, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Description Deb Hlyecgz Suo Tmjcg -Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. -Hydraulically controlled system for both vices and the working steps of the saw arm -Ball bearing mounted turntable -Frequency converter as standard for stepless adjustment of -saw band speed from 20 - 100 m/min -BRP - Saw band monitoring -The jaws of the two vices are equipped with long-stroke hydraulic cylinders as standard, thus eliminating the need for presetting to the material cross-section to be sawn -Quality Made in Europe Technical data Electrical connection 3 x 400 V / 50 Hz Motor power 2,4 kW Speed levels 2 saw band speed 20 - 100 m/min Saw band dimensions 3660 x 27 x 0,9 mm dimensions (L x W/D x H) approx. 2240 x 2710 x 2050 mm Table height material feed 800 mm weight approx. 800 kg Residual workpiece length min. CNC operation 115+20 mm cutting range 0° round profile 300 mm cutting range 0° round full 180 mm Cutting range 0° square material lying 320 x 300 mm Cutting range -45° round profile 300 mm Cutting range -45° round full 110 mm Cutting range -45° square material lying 290 x 300 mm Cutting range -60° round profile 200 mm Cutting range -60° round full 80 mm Cutting range -60° square material lying 190 x 190 mm Cutting range bundle round profile 320 x 160 mm

Condition: good (used), Year of construction: 2001, cooling capacity: 102 kW (138.68 HP), type of cooling: water, overall weight: 800 kg, total width: 970 mm, total length: 1,970 mm, total height: 1,300 mm, Chiller CLIMAVENETA 102 kW Dob Hly Tjwduh Remecg Cooling capacity: 102 kW / 29 tons (12/7 — 35°C) Refrigerant circuit: 2 pcs. Type of refrigerant: R404а Compressors: 2 pcs. Copeland Dimensions: 1.97 х 0.97 х 1.30 m Weight: 800 kg Country: Italy Condition: Good condition Without condenser

Condition: new, Metallkraft RB 54 mandrelless tube bending machine NC-controlled, with large program memory. NC control for setting the bending angle. High quality, robust construction Up to 50 programs can be stored Fast tool change Purely motorized drive Automatically returns to starting position TECHNICAL DATA: Bending radius max. 125mm Bending angle max. 210 Bending speed(s) 2rpm Dobjfdr Sae Hly Tmecg Torque 2341Nm length (product) approx. 600mm width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending capacity tube material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 650 N/mm² (Ø x wall thickness) 42 x 3mm Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Note: Substructure optionally available

Condition: good (used), Year of construction: 2020, cooling capacity: 53 kW (72.06 HP), type of cooling: air, overall weight: 580 kg, total width: 1,100 mm, total length: 2,400 mm, total height: 2,300 mm, AIRCOOLED CHILLER CLIVET WSAT-YES 18.2 53 KW Dob Hlowdt N Tey Tmecg Cooling capacity: 53 kW / 15,1 tons (12/7 — 35°C) Year of manufacture: 2020 Heat exchanger: Plate Type of refrigerant: R32 Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Mitsubishi Electric (twin rotary inverter) Number of fans: 2 pcs. Dimensions: 2.40 x 1.10 x 2.30 m Weight: 580 kg Working hours: 0 h Condition: Excellent Need to configure the control panel

Condition: new, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Horizontal and vertical working possibility Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Dobsdairto Hly Tmjcg Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Condition: new, Metallkraft PM 10 M punching machine with automatic operation and 10 t pressing force DESCRIPTION: For precise punching and cutting work due to powerful eccentric mechanism Two working modes selectable: Automatic mode: the machine performs 30 cuts per minute, saving time when processing workpieces with several identical punch cuts. Manual mode: The machine makes one cut after pressing the foot switch. Illuminated work area - Storage for punching and cutting tools in the base frame - Recesses in the base for easy transport with forklift truck - Tools must be ordered separately depending on the application, not included in the scope of delivery Dimensions and weights: Dcob Hlyjgplf So Tmeg Length (product) approx. 680mm Height (product) approx. 1400mm width/depth (product) approx. 430mm Weight (net) approx. 250kg Electrical data Power drive motor 2,2kW Type of current AC Supply voltage 400V Mains frequency 50Hz Phase(s) 3Ph Punching station Punching pressure 10t OTHER MODELS PLEASE REQUEST

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Djb Hskzk Hvely Tmecg Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Dceb Hlyecf D Rbs Tmjg Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. Dceb Hlyjkzk Exs Tmog DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS