Used Yuchai Yc15-8 for sale (14,667)

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Fjljv Ibkboimcy Uepg Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: ready for operation (used), Year of construction: 2000, turning diameter 320 mm turning length 750 mm control HeidenhainManualPlus 3110 centre height 160 mm turning dia. over face-slide 150 mm turning dia. in gap 380 mm length of gap 220 mm spindle head DIN 55027 spindle bore 50 mm max. torque max. 950 Nm turning speed range V-konstant 1-4000 U/min turret (x-stations) 8 / VDI 30 total power requirement 17 kW weight of the machine ca. 1,8 t Fpjlsv Nq S Deimcy Uog dimensions of the machine ca. 3,3 x 1,35 x 1,8 m Overall size 2,1 x 1,35 x 1,8 m switchgear cabinet 1,2 x 0,5 x 1,7 m Cycle lathe, DMT-Kern, with Heidenhain MANUALplus 3110 cycle control and Sauter 8-station turret. ONLY 5850 operating hours from a small mechanical workshop!

Condition: used, Functionality: fully functional, Year of construction: 2014, operating hours: 2,357 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,970 mm, fork carriage width: 1,470 mm, fork length: 1,200 mm, total length: 3,600 mm, drive type: Diesel, construction width: 2,070 mm, net weight: 5,518 kg, All-terrain forklift Fork width: 130 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Front tires size: 16/70-20 Rear tires Type: Air Rear tires size: 10,5/80-18 Description: In addition to this Manitou model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this M30-4 ST3B P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, heating, full cab, 4X4 Fpelimcovc Ivyjy Uog

Condition: good (used), 12,500 liters per minute at 8 bar per pump with a power of 237 kW. Engine brand FIAT, model 9L15 Fpolimjv Rwydjcy Ujg

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Fpeliewiaa Asmcy Ueg Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: used, Year of construction: 2008, Functionality: fully functional, Klanke Baler, Type KBST-110880, Year of Manufacture: 2008 Technical Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Manufacture: 2008 Pressing Force: 80 t Drive Power: 2 x 30 kW Total Connected Load: 75.5 kW Capacity: max. 225 cbm/h Bale Size: 1,050 x 760 mm, Variable Length Bale Weight: 400-500 kg Baling: 4-way horizontal, automatic Transport Dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Weight: 17,000 kg Accessories: 8 wire reel holders, bale chute Materials: Paper, cardboard, film, big bags, PET Operating Instructions, Electrical and Electronic Equipment Hydraulic diagrams are available in German. Note: The press is in working order. A floor plate in the press box is cracked and needs to be replaced. We also recommend replacing the chain on the twister, the hydraulic hoses, and the oil filter. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Foliswhi Utsmcy Uepg The sale is ex-works, without warranty or guarantee.

Condition: good (used), 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Fjlov N Dzfoimcy Uepg Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 4010 D Item no.: 3403045 Condition: New machine Center height: 200 mm Center width: 1.000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Fslimcyoilup Ns Uspg Equipped as standard with - 3-axis digital readout DPA 31 PLUS - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 19,678 h, load capacity: 12,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: standard, construction height: 3,950 mm, fork carriage width: 2,500 mm, fork length: 1,800 mm, total length: 4,700 mm, drive type: Diesel, construction width: 2,600 mm, net weight: 19,780 kg, Diesel forklift Load centre of gravity: 600 Fork width: 200 mm Fork thickness: 75 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: super elastic Front tyres size: 12.00-20 Rear tyres type: super elastic Rear tyres size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice on this DCG120-6 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Fjlimcju Dzk Djy Ujpg Heating, full cabin,

Condition: used, Year of construction: 2019, operating hours: 4,311 h, 2019 | Caterpillar | Caterpillar 930M High Lift | Used Wheel Loader | 4311 hours 📍Location: Germany, Mönchengladbach 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! Felimcyjwiaume Ujpg 💰 Buy Now for EUR 37700 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 41 approved ✅ 8 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: The machine is operational but requires some work and has some aesthetic issues. Noticeable play in the steering. One battery is missing, alternator and belt were not installed during the time of inspection. A limited test was performed. The seller will install a new alternator and belt prior to the sale. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38427 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Fpjlimcowiaapsy Ueg Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Fpjlimcyjrz Irrs Uog Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm Fslimcyoi Agyne Uspg -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: Felimobhfzbecy Uspg - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: used, Functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 800 mm, fuel type: electric, mast type: standard, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, net weight: 10,694 kg, Four-way sideloader Load center of gravity: 800 Fork width: 200 mm Felimou Dy A Ejcy Uopg Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Drums Front tires size: 660/250-480 Rear tires type: Drums Rear tires size: 413/178-285.8 Battery voltage: 80V Battery Ah: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 530 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. Felimcyswhp Dzs Uopg - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Foleimdx Tsimcy Uepg Note:The film shown is from a simular machine

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) Fslieb Ecp Ajmcy Uopg incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Fpjljipx Aieimcy Ujg Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Fpjlimsc I Tzvscy Ujg Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Fslimorbyrpjcy Uopg Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Fjlijvwkrgemcy Uspg Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes Felimcystk It Sj Uopg 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height Fjlimev Hw Hcscy Uepg - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. Fpslimev Hn N Uocy Uog - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM