Used Icm Et 75 for sale (106,701)

Condition: ready for operation (used), GMN TSE 75 cdu x 260/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cob Hlei Eaa Ue Ewdorb

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm Crsb Hl Ewovw Dwvjdjb z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm bolt thread from 1/16 - 2 3/4 " Cjbjv Irh Re Hl Ewderb inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then the machine has been in storage and has now been sold. Machine dealer with own stock of 1600 m².

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) Cob Hl Ewowfddwedjrb (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2001, Quick Action Clamps Automatic Paper Thickness Adjustment ROLAND Stream Feeder Cebowglwhj Hl Ewdjrb Double Sheet Control - electronic WEKO T6 Powder Sprayer Impression Account: 20 Mio.

Year of construction: 2013, Condition: ready for operation (used), Additional Equipment Extruder (Krauss Maffei) Crjb Hlsun Awrs Ewdob Calibration table (Ide) Haul-off (Ide) Separation unit (Ide) Optionally a sawing unit (Battenfeld) can be purchased the capacity is 180 kg / h Additional Equipment Extruder (Krauss Maffei) Calibration table (Ide) Haul-off (Ide) Separation unit (Ide) Optionally a sawing unit (Battenfeld) can be purchased the capacity is 180 kg / h This twin screw extruder was manufactured in 2013. It features a robust 4m long base frame, galvanized and powder-coated for durability. The machine includes three liquid ring vacuum pumps and a motorized longitudinal adjustment of 400mm. It's equipped with a caterpillar haul-off capable of speeds from 0.7 to 14.0 m/min. Ideal for producing roller shutter profiles, the Krauss Maffei KMD 75 XS/P machine we have for sale represents a significant opportunity. Contact us for further details. Application Types Extrusion

Condition: new, BEKA Baier + Köppel MZN 12-75 A gear pump , serial no. according to photo ,unused, 100% functional, scope of delivery according to photos Ceb Hl Eei D E Icswdjrb

Condition: used, overall weight: 30,000 kg, maximum load weight: 24,080 kg, axle configuration: > 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Crob Hlevipm Ts Ewdsb Model 4 akslet ET-31-5 ADR 31100 L 5 rum Year 2009 Condition Good Serial Number YF908S16S95049768 Ref. nr. 7712 Reg. date: 26-06-2009 Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 60-80% Toolbox: ? Total weight: 30000 Lg Net weight: 5920 Kg Load capacity 24080 Kg Tank: 31100 L Compartments: 5 (7600+8000+5000+5000+5500)

Condition: excellent (used), Year of construction: 2015, Replacement shredding shafts for LINDNER URRACO 75. Crjb Howc S E Dol Ewdsb

Condition: new, Year of construction: 2024, Seppi M. MAX 75 LE / 75 HP / Radio-Controlled Crawler Vehicle / Recovery Winch In stock & available immediately Price upon request Standard version and features: Dimensions*: - Total width of crawler track when retracted: 1,650 mm - Total width of crawler track when extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Length of crawler track: 1,570 mm - Width of crawler track: 230 mm - Lateral/longitudinal inclination: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Power: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversible fan (automatic fan cleaning) Cjb Hlotrh Tze Ewderb Drive: Tools hydraulic system: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Services hydraulic system: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Track drive: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic vehicle width adjustment (800 mm) mm (2x400 mm) - AUTO TRACK TENSION: Active automatic tensioning of the tracks - Patented track safety system - Stability and traction thanks to the strong profile and large contact surface of the tracks Control: - Radio remote control with graphic display (machine vital signs and slope indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting mechanism: - FLOAT: Lifting mechanism with assisted floating position (contact pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by extremely robust steel panels - Floor protection plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio-based hydraulic oil OPT 221 Rear forestry protection with recovery winch. Optional: SEPPI M. MICROFORST rc 155 - hydraulic forestry mulcher - further details upon request Price upon request Optional: SEPPI M. H5 rc 175 - hydraulic mulcher - further details upon request Price upon request We have a very large selection of various Seppi M. products in stock, all available immediately! Simply contact us at . We would be happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Subject to errors and prior sale!

Condition: used, Year of construction: 2015, machine/vehicle number: 12430004503, With CNC control, manufacturer: HEIDENAIN, type: TNC640, travels: X-axis: 750 mm, Y-axis: 650 mm, Z-axis: 560 mm, table diameter: 650 mm, dimensions: 800 x 650 mm, max. 18,000 rpm, with automatic tool changer, with 60 tool positions, tool holder: SK40-HSK63-BT40-CRT40, internal cooling system, fleece filter system, manufacturer: BMF, and chip conveyor Cjb Hl Ewewdbq Sjderb

Condition: reconditioned (used), Functionality: fully functional, DGUV certified until: 06/2026, year of last overhaul: 2025, Spiral Mixer Kemper Model: SP 75 Sophisticated technology... proven time and time again! Dough mixer with manual control 2 gears, 2 clocks/timers Kneading machine for doughs from 6 to 120 kg / 4-75 kg flour Flour dust hood Ceb Hjv D Tkfol Ewdjrb Stainless steel bowl and spiral Bowl capacity 175 liters Mobile, with locking device DGUV V3-certified Dimensions: 800 x 1150 x 1280/1700 mm, W x D x H Connection: 400V, 8.25 kW, 30Amp. 32A-CEE plug Used machine, overhauled 3-month warranty + spare parts service Options: Delivery Maintenance contract Service package E-box Instruction & commissioning Leasing & rental service Visit our large spiral mixer exhibition!

Condition: new, Bosch SPM 75-TD spindle module SN, unused, 100% functional, scope of delivery as per photos Csbsi D Ugie Hl Ewdorb

Condition: used, mileage: 237,000 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,300 kg, first registration: 12/2010, emission class: euro5, color: white, Year of construction: 2010, Equipment: ABS, air conditioning, Manufacturer Mercedes Model Spinter 516 CDI Versalift ET-36-LF 13,7 m. Year 2010 Condition Good Serial Number WDB9066531S441889 Ref. nr. 1427581 Reg. date: 03.12.2010 Engine: 2.1 liters - 120 kW CDI CAT Hk: 160 Km: 237000 Gearbox: Manual Eurotype: Euro 5 Cabin heater: ? Air conditioning: ? Disc brake: ? ABS: ? Tire Size: 205/75R16 - 205/75R16 Cover% left 70% - 50% Front suspension: Parable Suspension rear: Parable Wheelbase: 3665 mm Power take-off: ? Total weight: 5300 kg. Crsb Hst Afgrjl Ewdeb Net weight: 4300 kg. Lift Brand: Versalift ET-36-LF Lift capacity: 200 kg. Working height: 13.70 m.

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 25 mm injection weight: 41 g injection pressure: 1500 bar Metering volume: 49 ccm Clamping unit : clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Cob Hl Ejwcmgvowdjrb Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 467,946 km, first registration: 03/2009, color: other, axle configuration: 6x2, tire size: 315/80 R22.5, wheelbase: 4,950 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2009, Equipment: ABS, cruise control, electronic stability program (ESP), = Additional Options and Accessories = - CD Player - Electric Exterior Mirrors Cjb Hljwgrtve Ewdsrb - Electric Windows - Speed Limiter - Aluminum Fuel Tank - AC Power - Toolbox - Central Locking = Additional Information = Axle Configuration Tire Size: 315/80 R22.5 Brakes: Disc Brakes Front Axle: Steered; Left Tire Profile: 30%; Right Tire Profile: 30%; Suspension: Leaf Spring Rear Axle 1: Twin Tires; Left Tire Profile: 30%; Left Tire Profile: 30%; Right Tire Profile: 30%; Right Tire Profile: 30%; Suspension: Air Suspension Rear Axle 2: Left Tire Profile: 15%; Right Tire Profile: 15%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 869 x 255 x 390 cm Weight Curb weight: 15,255 kg Payload: 11,185 kg GVW: 26,440 kg Condition Damage: None

Year of construction: 1997, Condition: excellent (used), Name: Used twin-screw extruder Plama number: DE27666 Ceb Hl Ewsnl Ehwoderb Manufacturer: Leistritz Type: ZSE 75 GL Year of manufacture: 1997 Screw diameter: 2 x 75 mm Length L/D ratio: 36 D Motor: 143 kW Material: PE, PP, PS, ABS + fillers Capacity: 300-500 kg - (depending on material) Control system: Siemens PLC Details: Co-rotating, degassing, segmented screws and barrels Options: Screen changer, dosing, granulation This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: excellent (used), Year of construction: 2005, operating hours: 28,000 h, Functionality: fully functional, arm reach: 14,200 mm, load capacity: 30,000 kg, track width: 3,000 mm, net weight: 28,000 kg, number of previous owners: 1, Equipment: cabin, crane, OBX IV crane Power 45KW Crane at the front, cab on the left Cjb Hl Ewju H Hq Usdorb

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as per photos Csb Hei D Ulyol Ewdjrb

Condition: excellent (used), mileage: 852,336 km, power: 243 kW (330.39 HP), first registration: 01/2014, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 6,570 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, loading space width: 2,450 mm, loading space length: 8,200 mm, loading space height: 2,600 mm, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, parking heater, soot filter, spoiler, tail-lift, trailer coupling, = Further options and accessories = - Aluminum fuel tank - Leaf spring suspension - Power brake booster - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - High beams - Low noise level - Tail lift - Air suspension - Air horn - Fog lights - Particulate filter - Radio/CD player - Radio/cassette player - Side skirts - Sun visor - Stability control - Auxiliary heating - Auxiliary air conditioning - Toolbox - Central lubrication system - Central locking system Cob Hlowgmx Ho Ewderb - Tow bar = Further information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Drivetrain AdBlue system: Yes Fuel tank: 500 liters Transmission Transmission: ZF, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Left tire profile: 30%; Right tire profile: 30% Rear axle 1: Tire size: 315/80R22.5; Left tire profile: 30%; Right tire profile: 30% Rear axle 2: Tire size: 315/80R22.5; Lift axle; Steered; Left tire profile: 30%; Tire tread right: 30% Dimensions Dimensions (L x W x H): 1052 x 255 x 364 cm Weight Curb weight: 12,560 kg Payload: 13,440 kg GVW: 26,000 kg Functional Tail lift: DHOLLANDIA DHLM.30, tailgate, 2500 kg Sunroof: Yes Condition Technical condition: very good Visual condition: very good Damage: none Further information Contact LUC SCHOEFS or GERMAIN DAENEN for further information.

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit : clamping force: 25 t tie bar distance : 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Crsbjwcmg As Hl Ewdjb Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 387,122 km, first registration: 10/2007, color: other, axle configuration: 6x2, tire size: 315/80 R22.5, wheelbase: 4,950 mm, brakes: engine braking, driver cabin: day cab, emission class: euro4, suspension: steel-air, Year of construction: 2007, Equipment: ABS, cruise control, electronic stability program (ESP), = Additional Options and Accessories = - CD Player - Electric Exterior Mirrors - Electric Windows Csb Hl Ejwgqi Aowdsrb - Spare Key - Speed Limiter - Aluminum Fuel Tank - AC - Central Locking = Additional Information = Axle Configuration Tire Size: 315/80 R22.5 Brakes: Disc Brakes Front Axle: Steered; Left Tire Profile: 50%; Right Tire Profile: 50%; Suspension: Leaf Spring Rear Axle 1: Twin Tires; Left Tire Profile: 20%; Left Tire Profile: 20%; Right Tire Profile: 20%; Right Tire Profile: 20%; Suspension: Air Suspension Rear Axle 2: Left Tire Profile: 20%; Right Tire Profile: 20%; Suspension: Leaf spring Dimensions Dimensions (L x W x H): 869 x 255 x 390 cm Weight Curb weight: 15,475 kg Payload: 10,525 kg GVW: 26,000 kg Condition Damage: None

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, Functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours Crsb Hl Eweub Umqedsb - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Cjb Hl Eowgpwfowdsrb Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: ready for operation (used), Emod VK50 / 22-75 flat engine SN:7651600, used, normal signs of use, 100% functional, scope of delivery as per photos Creb Hl Eoi D Hu Eowdeb