Used Bimak 18 Ts for sale (96,953)

Condition: ready for operation (used), Mitsubishi HA80C-SS servo motor SN:53031 + OSE 5KN-6-12-108 encoder SN:66319S ,used, normal signs of wear, 100% functional, scope of delivery according to photos Fsbviei D I Ryj Ix Asgb

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l Fgobvijwh U Ufe Ix Aeb incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 1991, operating hours: 15,370 h, Field of application: Construction Serial number: 2xxxx Please contact ATS Norway AS for more information Fgebviovgyu Aj Ix Aeb Please provide reference number upon request: 19318 Specifications: - 1991 model - Hours: approx. 15,370 - Tires (see pictures) - Bucket - Width of the bucket: approx. 295 - Comes with a couple of chains, quite worn - Bad hand break - Rotor lamp - Starts and runs - Extra light at the back - Climate Description: Komatsu WA380 wheel loader from 1991. The wheel loader was last certified in 2022. The handbrake is very bad and has therefore not been certified since. It comes with a couple of worn chains. It starts and runs, see video. Can be delivered within a short time. Hours: 15370

Condition: good (used), power: 97 kW (131.88 HP), color: yellow, Year of construction: 2017, operating hours: 6,646 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMTPW027PHHH60420 Technical information Drive: Wheel Make of engine: SAA4D107E-1 Top speed: 35 km/h Empty weight: 17.660 kg Condition Technical condition: good Fgsbvewg Dt Uoi Ix Aob Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 308 l/min Emission level: Stage IIIA / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,11x2,55x3,175 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements width 4200 mm Measurements depth 3600 mm Measurements height 2470 mm Machine weight 5700kg Fgjbviowh A R Uo Ix Ajb Main Drive Spindle speed range 15000 Tool taper BT40 Number of axis 4 Movement X-Axis Rapid Traverse 40000mm/min Y-Axis Rapid Traverse 40000mm/min Z-Axis Rapid Traverse 40000mm/min Workpiece Workpiece weight 200kg Tools Number of index 30 Max weight 8kg Max tool diameter 150mm Max tool length 300mm Type of tool holder JIS B 6339 tool shank 40T This 4-axis Matsuura ES-450HII PC5 was manufactured in 1999. It's a horizontal machining centre designed for precision and efficiency. If you are looking to get high-quality milling capabilities, consider the Matsuura ES-450HII PC5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Febswh Tyysvi Ix Ajgb

Condition: good (used), Year of construction: 2003, Machining Center Manufacturer: Matsuura Fgjbvi Ixoltlx Ns Aeb Type: H Plus 405 PC6 Year of Manufacture: 2003 CNC Control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table Size: 500 x 500 mm 6-Station Pallet Changer 120-Station Tool Magazine 4th Axis Knoll High-Pressure System Internal Coolant 70 bar 080525ä

Condition: excellent (used), Year of construction: 1994, machine/vehicle number: 91080-41861, Power: first plate 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Fgsbvewh R A Eoi Ix Asb Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

Condition: used, Year of construction: 2018, operating hours: 7,556 h, Field of application: Construction Fobvi Isvg A E Dsx Ajgb Serial number: K7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18475 Specifications: - 2018 model - 7700 hours - 30350 kg - 159 kW - Undercarriage (see pictures) - S70 attachment - Rototilt - Cleaning bucket - Digging bucket - Cleaning bucket - Topcon Gps - Belt plate width: 60 cm - Machine width: 318 cm - Service history - Central grease - Bunker pump - Climate/Ac - 360 degree camera - Light - Radio - Ready for delivery Description: Great komatsu Pc290 with lots of equipment. The machine has a full service history and can be documented. A 500 hour service has just been done by Komatsu. The machine is ready for delivery. Hours: 7556 Total Weight: 30350 Kw: 159

Condition: good (used), power: 270 kW (367.10 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 7,428 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMTPC251CHKK70088 Technical information Track width: 70 cm AdBlue system: Yes Make of engine: SAA6D125E-7* Top speed: 6 km/h Empty weight: 48.000 kg Febjwgyqisvi Ix Asgb Condition Technical condition: good Visual appearance: good Other information Output of the auxiliary hydraulics: 780 l/min Dipper / stick length: 338 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,93x3,765x3,63 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Functionality: fully functional, power: 66 kW (89.73 HP), overall weight: 7,720 kg, Year of construction: 2015, Equipment: additional headlights, air conditioning, cabin, hydraulics, Komatsu WA100M-6 solid rubber/additional hydraulics/air conditioning - Manufacturer: Komatsu - Type: WA100M-6 - Year of manufacture: 2015 - Operating hours: 7175h - Perm. total weight: 7720kg Fobvi Ixevgdgce Asgb - Power: 66kW - CLIMATE - Solid rubber industrial tires - Fast and slow - Auxiliary headlights - Auxiliary hydraulics - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand NETSTAL Injection Unit Injection pressure 279 kN Clamping Unit Clamping force 1500 kN Opening stroke 0-450 mm Mould height min 400 mm Mould height max 700 mm Additional Equipment Equipment: PLastification D 45-22D LP A / Mould heaters: 4 x 3.3 KW/ 32 x 0.75 KW / Robot interface 12+ / Paint conveyor interface Europe interface 15 1-1 / 4 air valves 890L / 1 core puller Hydr Cooling water in the outlet opening and 2 distributors on each of 8 cooling circuits The machine was partially overhauled in 2018 This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN. Febvi Ixjwhgqfj Aegb Application Types Injection Moulding

Condition: good (used), Year of construction: 2007, 5-Axis Machining Center Manufacturer: Matsuura Febsltludjvi Ix Aogb Type: MAM 72-25 V Year of Manufacture: 2007 CNC Control: Fanuc G-Tech 30i Travel: X/Y/Z: 550 x 410 x 450 mm Table Size: Ø 130 mm Spindle: 15,000 rpm Pallet Changer: 10-Station Tool Magazine: 60-Station Knoll High-Pressure System Internal Coolant 70 bar 080525ä

Condition: excellent (used), Functionality: fully functional, warranty duration: 3 months, DGUV certified until: 06/2026, year of last overhaul: 2025, Dough Sheeter Fritsch Rollfix Model: 3 / 520 Easy manual operation For all types of dough for rolling and turning Foldable tables Rolling thickness from 0.5 to 30 mm Mobile dough sheeter DGUV V3 certified Dimensions: 740 x 2500 mm DxW working position Connection: 400V, 1.1 kW, 16A CEE plug Used machine, cleaned and tested Fgebewhaklovi Ix Aeb 3-month warranty + spare parts service Option: Maintenance contract Service package Instruction & commissioning We have many other dough sheeters in stock for you!

Condition: used, Year of construction: 2005, operating hours: 3,706 h, Field of application: Construction Serial number: F0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18800 Specifications: - 2005 model - Weight: 3510 kg - 20.6 kW - 3706 Hours - Machine width: 155 cm - Rubber belts - S40 attachment - Extra hydraulics - Hydraulic lateral shift on the boom - Tooth bucket with shear - Rotor tilt (2021) - Climate/ac - Shear - Light - Service history at Hesselberg - ready for delivery Description: The machine is sold with a rotot tilt and tooth bucket with shear. The machine has a full service history. There is some looseness on the HK mount. Ready for delivery Hours: 3706 Total Weight: 3510 Width: 155 Fjbvi Ixjvgyruj Aogb Kw: 20.6

Condition: good (used), power: 275 kW (373.90 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 3,996 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMTPC256JJKK70446 Technical information Track width: 80 cm Empty weight: 41.300 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: SAA6D114E-6 Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Production country: UK Additional information Fsbvi Ixjwgnyxs Aogb Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Fsbvi Ixjivta Ne Asgb mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: used, Year of construction: 1996, sawing length: 5300mm sawing height: 2100mm cutting depth: 60mm scoring unit: no feed: manuell read out horizontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm evasive workpiece support: ja speed sawblade: ca. 4000 U/min motor power: 3 kW machine length: 6500mm Fsbvi Iouix Eyex Asgb machine width: 1500mm machine height: 3000 mm weight: 800kg

Condition: used, Year of construction: 2000, operating hours: 23,000 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19332 Specifications: - 2000 model - Hours: Approx. 23,000 - Weight: Approx. 25,060 kg - 132 kW - Central grease on the crushing part - Jaws are ok - Total width: Approx. 3 meters - The radio control does not work - Volvo engine, overhauled 4 years ago - Lines and rolls (see pictures) - Videos are available Description: Metso LT110 Crusher from 2000. The crusher has run 23,000 hours. Is in daily operation, videos are available. Fobviovg Atue Ix Asgb One plate is turned, a little under 50% on the jaws says the owner. Hours: 23000 Total Weight: 25060 Kw: 132

Condition: good (used), power: 126 kW (171.31 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 12,870 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMT0D120C01030604 Technical information Track width: 86 cm Drive: Track Make of engine: SAA6D107E-2* Empty weight: 18.600 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 5,48x2,99x3,18 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Fgobvjwgnxbsi Ix Asb

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Fjbvoiyyxcei Ix Aogb Very good condition, directly from production!!!

Condition: used, Year of construction: 2007, operating hours: 11,763 h, Field of application: Construction Serial number: 7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20177 Specifications: - 2007 model - New engine 2563 hours - Replaced engine at 9200 hours - Total hours on the plant: 11,763 hours - New engine (factory new with starter) - Inner casings 95% remaining - Outer casings 95% remaining - Overhauled generator - Replaced clutch - 2 side belts included (see pictures) - 3 screen covers (nordberg B380) - Services performed by Metso and owner - Magnet - Magnetic belts included if desired (almost never used) - Has cloths in different sizes that can be included for an additional price - Lights Description: We have a 2007 Metso Lokotrack LT1100 Fine crusher w/ side belts for sale. It is a new engine that has only run 2563 hours. It was replaced at 9200 hours. In total, the machine has run 11,763 hours. Magnetic tape is included if desired. Tablecloths in different sizes can be included for an additional price. It can also be included with a Feeder with tape for an additional price. Fjbswdvk Hovi Ix Asgb Services have been performed by Metso and the owner himself and have been taken continuously. This machine has had 1 permanent driver throughout. The machine functions as it should according to the owner. Hours: 11763

Condition: excellent (used), Dust extraction DCE UMA 152 G 3 Fgebveiu H Txsi Ix Aob Filter area 14 m² Pocket filter Very good condition, directly from production!!!

Condition: used, Year of construction: 2007, Field of application: Construction Serial number: 165661xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20140 Specifications: - 2007 model - Feed box - Discharge belt: 6.5 meters - Mounted magnet - Level guard - Level control guard - Magnet - Belt Fsbviswdvb Sj Ix Aegb - Ready for delivery Description: We have a 2007 Metso TK-10-15 Feed box w/ level control guard and magnet for sale. Everything works as it should according to the owner. The feed box has been used for 0-120. Ready for delivery.

Condition: used, Year of construction: 2010, operating hours: 13,945 h, Field of application: Construction Serial number: 7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20139 Specifications: Fgobvjwdu Iwoi Ix Aeb - 2010 model - 13945 hours - 310 kW - 59500 kg - Belt weigher - Central lubrication - Radio control - Feed box - Recently serviced - Conveyor belt - Magnetic belt - Ready for delivery Description: We have a 2010 Metso Lokotrack LT 110C Coarse crusher w/ magnetic belt for sale. The crusher has been recently serviced. Everything works as it should according to the owner. Ready for delivery. Hours: 13945 Total Weight: 59500 Kw: 310