Used Bimak 13 Da for sale (69,054)

Condition: new, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 157 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 13/20-4 S CLASSIC WASHER: Model: HDS 13/20-4 S CLASSIC Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 600 - 1300 Working pressure (bar/MPa): 30 - 200 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80 Connection power (kW): 9.3 Power cable (m): 5 Weight (kg): 157 Dimensions (length x width x height) (mm): 1075 x 722 x 915 EQUIPMENT OF THE KARCHER HDS 13/20-4 S CLASSIC WASHER: Pressure gun: Karcher Professional !EasyForce Classic High pressure hose: Karcher Professional - 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Cgslitdxev Tbtte Nst Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and comfort of work Solid tubular construction protects the pump from damage Easy access for easy service and maintenance of components Safety valve on the high-pressure pump High efficiency with low emissions and long service life Long operation thanks to a 30-liter fuel tank Two detergent tanks separated from each other Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, 10m high-pressure hose and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is brand new and factory packed

Condition: new, Fervi T052/400VDA Milling drill. Ready for delivery except sold. With automatic descent, choice of direction of rotation and belt drive rack spindle 1 ÷ 13 b16 drilling spindle attachment cm 3 cutter attachment cm 3 ø 27 mm refrigeration system Drilling capacity with pre-hole Ø 32 mm Milling capacity with insert cutter Ø 76 mm Milling capacity Ø 20 mm Head stroke 405 mm Morse taper CM 3 Colitdeh Dbbgox Nsgt Column spindle distance 205 mm Max. distance between spindle and table 700 mm Spindle stroke 130 mm Manual vertical feed division 0,05 mm Sleeve Ø 75 mm

Condition: used, overall weight: 13,500 kg, maximum load weight: 11,100 kg, axle configuration: 2 axles, first registration: 09/2007, next inspection (TÜV): 09/2024, Year of construction: 2007, Equipment: ABS, * Jung TTA 13 L demountable trailer * TÜV 09/2024 * Tires 285/70 R19.5 * BPW axles * Air suspension 1st hand!!! Very good condition Celitdxjtvh Tpo Nsgt Give us a call! ????? ??? ?? ?????! Beszelünk magyarul! Zadzwo? do nas! Appelez-nous! ???? ??? ?? ???? ????? Would you like to visit us? We offer a free pick-up service from the train station in 98544 Zella-Mehlis. We take care of all customs and registration matters for an additional charge. We transport the vehicles to the port for an additional charge. Where to put the used car? Please bring the used car with you, we are happy to accept it as a trade-in. We will tell you the price for it straight away. Subject to typographical errors, mistakes, changes and prior sale. If a foreign currency is specified, this will be done at the current daily rate. The currency of the vehicle's location is valid.

Condition: as good as new (ex-display), Year of construction: 2024, Product width: min. 25 mm up to max. 250 mm Product hight: min. 5 mm up to max. 200 mm Tension: variable Band width: 30 mm or 40 mm Roll lenght: 150 to 200 m Core holder: 50 mm Celitdxebfibfo Njgt Speed: ~ 25 cycles / minute Machine measues (L x W x H): 490 x 360 x 220 mm Weight: 32 kg Power supply: 230 V 50 Hz

Condition: used, Year of construction: 2019, KOLBUS Casemaker DA 270 BOOKJET EDITION year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Configuration: - Copilot system with touchscreen - board magazine for manual loading - cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - miss cloth control during the separation process - counter stacker delivery with following roller conveyor - cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - centre strip pressing device (head/tail) - pressing roller device for crease-free connection of the - cover material with boards and spine strip - device for producing padded cases - automatic case counter - programmable automatic settings, motorized adjustments, - indication of production faults - single case request for control purposes done from the operating side - servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device - board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip - device for cutting rigid centre board strips to width, with possible width variatio from cycle to cycle - with data coupling via AFS 702.W with input and output code reader for digital print finishing - processing of Hotmelt with premelter LH 375.B Technical specifications: mechanical speed: up to 65 cycles/min open cover size max.: 670 x 390 mm open cover size min.: 205 x 140 mm joint width: 4 - 15 mm spine width: 14 - 120 mm turn in width closed: 8 - 15 mm cloth width: 223 - 708 mm cloth height: 130 - 428 mm board thickness: 1 - 4 mm board width: 95 - 328 mm board height: 140 - 390 mm board centre strip thickness: 1 - 4 mm board centre strip width: 6 - 90 mm Option: KOLBUS Pneumatic Corner Cutter ECK 100 Cjlsr Abbpsitdx Njgt year 2011 For cutting the corners of covering materials, card-board and paper. Standard equipment: - with tool cabinet

Condition: new, Year of construction: 2024, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz Many of our machines are available immediately. Call and find out more. The announcement concerns the basic version of the machine. All optional extras and their prices are available on our website. Hydraulic press brake PBO-4124-PRO DA-66T Technical parameters - Nominal pressure: 2400 kN - Engine power: 22.0 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14000.0 kg - Oil tank: 210 l - Maximum length of bent sheet metal: 4100 mm - Distance between beams: 4100 mm - Beam width: 3550 mm - Table height: 1610 mm - Maximum opening height: 530 mm - Maximum stroke of the moving beam: 260 mm - Table width: 90 mm - Depth of cut in beams (throat): 410 mm Tools - Automatic bumpers on linear guides driven by servo. 2 pcs. - Front supports: 2 pcs. - Rear stop distance adjustment (X axis): servo drive - Beam adjustment (Y axis): independent control of Y1 and Y2 axes via servo drive - Punch mounting type: AMADA quick assembly Cgolitdjvwmkfox Njt Delem DA-66T controller - through automatic control of 8 axes, bending is more efficient - can save 500 programs of 25 steps and 99 repetitions - up to 30 punches/dies can be saved in memory - controller with 2D/3D programming mode - 17″ TFT touch screen - Windows system with controller software (possibility of creating programs on a computer) - bend compensation control from the controller level - comprehensive design of the Delem controller - USB with the possibility of connecting devices - space for connecting a bending angle sensor Specialist assistance We make sure to stay in constant contact with our Client. For this reason, we meet your needs by adding a package of hours to each purchased machine to be used for Otinus Specialist Assistance. See and test the machine We invite you to a unique show, where a qualified Otinus technician will present the full functionality of the machine. In addition, you will be able to try out how the device will work against your needs. You can provide technical drawings and material for making samples. The price of the machine includes 2-day training with machine installation - Day 1 (up to 8 hours) - machine installation and learning how to use the controller. - Day 2 (up to 8 hours) - independent work on the machine under the supervision of our technician - possibility of programming specific details that the Customer makes. Telephone consultations with a specialist - from 7.30 to 21.00 (Mon-Sat) - 8-hour package to be used within 12 months - Free rental of transport rollers and two lifts for easier machine setup at the Customer's premises. The rollers and the lifter will be delivered after prior (no less than 7 days before the delivery of the machine) notification of the demand. Terms of cooperation - Warranty for a period of 24 months. - Order fulfillment time: approx. 6-8 weeks. Does not apply if the machine is marked as available immediately. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on the premises of his company

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 62 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/18-4S The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1300 Working pressure (bar): 180 Maximum pressure (bar): 275 / 27.5 Connection power (kW): 9.2 Weight (kg): 62 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 Maximum water supply temperature 60°C Coliev S Tt Netdx Nogt Contents of cleaning agent tank (l) 6 EQUIPMENT: NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows dosing of cleaning fluid directly by the machine Very legible and intuitive panel control Simple construction and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, load capacity: 3,000 kg, lifting height: 13,000 mm, fuel type: diesel, Visual condition: normal, Technical condition: normal Cjlijv Ri Imotdx Negt

Condition: good (used), Functionality: fully functional, Vario baking device for 13 tartlets Stainless steel table device Temperature adjustable up to 300°C Baking time adjustable Tartlet 75 mm Connection 230V, 3.2 kW Cjlitst U U D Rodx Njgt Table device dimensions: 430 x 400 x 380 mm, WxDxH Used device cleaned Many other baking devices in stock!

Condition: new, Year of construction: 2025, Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 1.3-Liter volume each. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; weighing range: 10-3000g; accuracy: +/-0.1-2.0g; touchscreen operation; stagger dump; stainless steel; 220V, 1.5kW; L1436xW1086xH1258mm; 400/450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Celitdev Nmpfex Njgt

Condition: used, Faceplate Diameter 700 mm KKG 8 Cgelitdxeddygdo Nst PCD 171 mm

Condition: new, Year of construction: 2024, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz Many of our machines are available immediately. Call and find out more. The announcement concerns the basic version of the machine. All optional extras and their prices are available on our website. Hydraulic press brake PBO-4120-PRO DA-66T Technical parameters - Nominal pressure: 2000 kN - Engine power: 18.5 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 110 mm/s - Weight: 12500.0 kg - Oil tank: 210 l - Maximum length of bent sheet metal: 4100 mm - Distance between beams: 3550 mm - Beam width: 1600 mm - Table height: 880 mm - Maximum opening height: 530 mm - Maximum stroke of the moving beam: 260 mm - Table width: 90 mm - Depth of cut in beams (throat): 410 mm Tools - Automatic bumpers on linear guides driven by servo. 2 pcs. - Front supports: 2 pcs. - Rear stop distance adjustment (X axis): servo drive - Beam adjustment (Y axis): independent control of Y1 and Y2 axes via servo drive - Punch mounting type: AMADA quick assembly Delem DA-66T controller - through automatic control of 8 axes, bending is more efficient - can save 500 programs of 25 steps and 99 repetitions - up to 30 punches/dies can be saved in memory - controller with 2D/3D programming mode - 17″ TFT touch screen - Windows system with controller software (possibility of creating programs on a computer) - bend compensation control from the controller level - comprehensive design of the Delem controller - USB with the possibility of connecting devices - space for connecting a bending angle sensor Specialist assistance We make sure to stay in constant contact with our Client. For this reason, we meet your needs by adding a package of hours to each purchased machine to be used for Otinus Specialist Assistance. See and test the machine We invite you to a unique show, where a qualified Otinus technician will present the full functionality of the machine. In addition, you will be able to try out how the device will work against your needs. You can provide technical drawings and material for making samples. The price of the machine includes 2-day training with machine installation - Day 1 (up to 8 hours) - machine installation and learning how to use the controller. - Day 2 (up to 8 hours) - independent work on the machine under the supervision of our technician - possibility of programming specific details that the Customer makes. Telephone consultations with a specialist - from 7.30 to 21.00 (Mon-Sat) - 8-hour package to be used within 12 months Cgjlitsvwmi Ijdx Njt - Free rental of transport rollers and two lifts for easier machine setup at the Customer's premises. The rollers and the lifter will be delivered after prior (no less than 7 days before the delivery of the machine) notification of the demand. Terms of cooperation - Warranty for a period of 24 months. - Order fulfillment time: approx. 6-8 weeks. Does not apply if the machine is marked as available immediately. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on the premises of his company

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, fuel: electricity, overall weight: 62 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/18-4S The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1300 Working pressure (bar): 180 Maximum pressure (bar): 275 Connection power (kW): 9.2 Weight (kg): 62 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 Maximum water supply temperature 60°C Contents of cleaning agent tank (l) 6 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Cjlitev S Tqzodx Nsgt Built-in chemical tank allows dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple design and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: good (used), wire electrode, welding wire, welding wire Cjlitdxefw Rwbo Njgt -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 /105 mm -Weight roll: 13.8 kg

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Celitdeu Ngfdox Nsgt Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, Year of construction: 2025, Weighing unit with 14 weighing heads (containers) for very precise weigh checking, with 1.3-Liter volume each. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; weighing range: 10-3000g; accuracy +/-0.1-2.0g; touchscreen operation; stagger dump; stainless steel; 220V, 2.0kW; L1600xW1136xH1374mm; 250/300kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Csljv Nmpreitdx Negt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Insert face milling cutter ( 28233) Cslishzt E Tstdx Negt type Gigacut AW 125-13-8 diameter 125 mm mounting hole 40 mm weight 2,5 kg

Condition: new, Year of construction: 2024, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz Many of our machines are available immediately. Call and find out more. The announcement concerns the basic version of the machine. All optional extras and their prices are available on our website. Hydraulic press brake PBO-3112-PRO DA-69T Celijvwmh Dotdx Nogt Technical parameters - Nominal pressure: 1200 kN - Engine power: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum length of bent sheet metal: 3100 mm - Distance between beams: 2550 mm - Beam width: 1590 mm - Table height: 880 mm - Maximum opening height: 540 mm - Maximum stroke of the moving beam: 260 mm - Table width: 60 mm - Depth of cut in beams (throat): 410 mm Tools - Automatic bumpers on linear guides driven by servo. 2 pcs. - Front supports: 2 pcs. - Backgauge distance adjustment (X axis): servo drive - Beam adjustment (Y axis): independent control of Y1 and Y2 axes via servo drive - Punch mounting type: AMADA quick mounting type Delem DA-69T controller - 2D and 3D touch graphic programming module - 3D visualization for simulation and machining - 17-inch high-resolution TFT color screen - Full Windows operating system - Compatibility with Delem Modusys system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using sensors including a menu for parameter correction - Offline Profile-T3D software Specialist assistance We make sure to stay in constant contact with our Client. For this reason, we meet your needs by adding a package of hours to each purchased machine to be used for Otinus Specialist Assistance. See and test the machine We invite you to a unique show, where a qualified Otinus technician will present the full functionality of the machine. In addition, you will be able to try out how the device will work against your needs. You can provide technical drawings and material for making samples. The price of the machine includes 2-day training with machine installation - Day 1 (up to 8 hours) - machine installation and learning how to use the controller. - Day 2 (up to 8 hours) - independent work on the machine under the supervision of our technician - possibility of programming specific details that the Customer makes. Telephone consultations with a specialist - from 7.30 to 21.00 (Mon-Sat) - 8-hour package to be used within 12 months - Free rental of transport rollers and two lifts for easier machine setup at the Customer's premises. The rollers and lifter will be delivered after prior (no less than 7 days before the delivery of the machine) notification of demand. Terms of cooperation - 24-month warranty. - Order processing time: approx. 1-2 weeks. Does not apply if the machine is marked as available immediately. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on the premises of his company

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, fuel: electricity, overall weight: 70 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 901 B The device has new equipment, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle. The brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation. The very efficient Honda GX270 combustion engine ensures stable operation even with long-term use. Thanks to the operating parameters of 200 bar and 750 l / h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture. Each device we offer has individually taken photos, you buy exactly the machine you see. TECHNICAL DATA: Power supply: Combustion Engine: Honda GX 270 Pumping capacity [l/h]: 750 Working pressure [bar]: 200 Maximum pressure [bar]: 230 Weight [kg]: 54 Dimensions (length x width x height) (mm): 1045 x 582 x 670 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun Cgolitdxov S Hc Ds Net NEW stainless steel pressure lance NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE

Condition: used, Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Online-Video-Inspection by Skype-Video Coliteh Axztsdx Nogt We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Technical details: bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg Celitsvgbdxjdx Nsgt dimension machine xH: 0,6 x 0,31 x 1,7 m The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included *

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-69T Specifications - Nominal bending force: 600 kN Cgslitdjvwmgtsx Net - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-69T control - More efficient bending thanks to automatic control of 8 axes - Can store up to 500 programs, each consisting of 25 steps and 99 repetitions. - Can save up to 30 upper and lower dies. - 2D and 3D programming capability - 17-inch color TFT screen of high resolution - Windows-based software with PC programming capability - Crowning control managed by the controller - A well-integrated structure, designed by Delem to meet the highest standards. - USB port with device connectivity - Mounting port for a bending sensor - The control system and sensors prevent collisions between individual axes. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Within the service, our technicians may - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Cgoleu Icmueitdx Not Accessories various dies and various punches and small punches (see photo) The machine is not tested, we offer it as is. *

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-66T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment Celitdevwmf Nex Nsgt - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours - Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Cslju Icnfoitdx Nsgt Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *