Used Ingersoll Rand 9/270 for sale (138)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] Bwehxzf Neuhbtkscsl EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: refurbished (used), Year of construction: 2006, Status: overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 Ampere - multipulse Bohxjtxnybezf Ncswl Travel (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 13-fold pick-up linear changer Work bowl (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Bshevwa Nbsxzf Ncjwl The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 450 mm, table length: 850 mm, table width: 700 mm, total height: 2,700 mm, total length: 3,200 mm, total width: 2,500 mm, rotational speed (max.): 42,000 rpm, overall weight: 7,700 kg, For sale is a machining center of the brand Ingersoll and the type OPS 650 The machine is fully operational and in good condition. Particularly noteworthy is the high-speed cuttting spindle with 42,000 rpm and the 72 tool positions New spindle 2019, new X & Y-axis 2023 Technical data: Year of construction: 2005 Control system: Andronic X travel: 700 mm Travel Y: 550 mm Bwehxzst Eugmjf Ncel Z travel: 450 mm A-axis: 120 ° C-axis: 360 ° Clamping surface: 850*700 mm Load capacity: max. 2,000 kg Path control: Fully adapted to 3D Traversing speed: max 30 m/min Tool magazine: 72 places Dimensions L W H: 2,500x3,200x2,700 mm Weight: 7,700 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 Behxzfsmydnkj Ncswl -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Condition: used, Year of construction: 1999, table length 850 mm table width 550 mm ampere 70 A control CNC MITSUBISHI 32bit axis stroke (X,Y,Z) 550 / 850 / 450 mm weight of the machine ca. 6 t dimensions of the machine ca. 2,4 x 2,65 x 2,68 m Spark Erosion Machine / Cavity Sinking EDM Machine The machine is in a very good condition. Equipment / Eccessories: - Y-travel at electrode change and loading position: 1180 mm - integrated C-axis working head speed adjustable: 10/20 rpm - integrated C-axis / working head measuring resolution: 0.001 mm - load capacity without changer: 50 kg - load capacity with changer: 10 kg - max. head load: 200 kg - max. distance tool carrier plate to work table: 585 cm - min. distance tool carrier plate to work table: 125 mm - working tank: - lifting tank dimensions (W x D x H ): 800 x 1100 x 480 mm - dielectric height programmable/automatic: 440 mm Behxzf Nju Dbtljcowl - filter cartridge version: cartridges integrated - electrode changing system / pick-up plate magazine Positions: 20 - electrode weight /single electrode: 15 kg - total changer: 60 kg - generator FP 70 Ampere, multipulse - electrode changer: 20-fold pick-up linear changer - electric hand-operated bottle - C0² fire extinguishing system integrated / dielectric cartridge filter system

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Bwohxsu Axzkjzf Ncjl Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: refurbished (used), Year of construction: 2013, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Bwjheuix Tqoxzf Ncol Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: used, liter capacity 350 l Bwjhxjunum Sezf Ncjl weight of the machine ca. 0,2 t dimensions of the machine ca. 1300x900x1000 m

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Bohxzeuu Rthof Ncewl Cooling system WKZ not included On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 72, swivel angle A-axis (max.): 120 °, swivel angle C-axis (max.): 360 °, Highlight: High-speed cutting spindle with 42,000 rpm, 72 tool positions New parts: Spindle from 2019 / X & Y axis from 2023 TECHNICAL DETAILS Control system: Andronic X-travel: 700 mm Y-travel: 550 mm Z-travel: 450 mm A-axis: 120° C-axis: 360° Table and load capacity Clamping surface: 850 x 700 mm Max. Load capacity: 2,000 kg Control and speed Path control: Fully adapted to 3D Travel speed: max. 30 m/min Tool magazine Number of tool positions: 72 Behxzeuzg E Ief Ncswl MACHINE DETAILS Dimensions (L x W x H): 2,500 x 3,200 x 2,700 mm Weight: 7,700 kg SCOPE OF DELIVERY Measuring probe (see photo) Fixed table for conversion to 3-axis (unused, see photo)

Condition: new, Year of construction: 1995, operating hours: 0 h, 1 piece stainless steel volute pump from Ingersoll Dresser in excellent condition. On base plate with coupling Impeller and casing made of V2A stainless steel 316 (1.4401) Identical in construction to KSB CPK 100-250 Volume: 230 m³/h Conveying height: 70 m Speed: 2900 rpm Bjhxzfoc Ivaaj Ncewl Shaft power: 57 kW Required drive power: 75 KW With base plate without electric motor. Electric motor can be installed by us.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS control: multipulse 64 X-axis: 525 mm Y-axis: 400 mm Z-axis: 375 mm Bohxzfeuqbx Hs Ncswl Work table Work table size (L x W): 730 x 630 mm Electrical data Operating voltage: 400 V - 50 Hz Power consumption: 12 A Control voltage: 230 AC / 24 DC Back-up fuse: 25 A Dielectric tank Capacity: 400 l MACHINE DETAILS Width: 2,100 mm Depth: 2,450 mm Height: 2,600 mm EQUIPMENT - Machine documentation - Accessories from pictures