Used Ingersoll Rand 10/105 for sale (138)

Condition: used, Year of construction: 2004, Field of application: Construction Colraeq Eax Ue Efiegt Empty weight: 1.048 kg Make of engine: Electric variable speed drive Capacity: 10,7 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 1.5x1.4x1.9 Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, New: No Attachment suited for: Agricultural machines General condition: very good Cgoljtyw Nzera Efiot Technical condition: very good Visual appearance: good Damages: none

Condition: excellent (used), Year of construction: 2005, INGERSOLL RAND diesel compressor Capacity 3,10 m3/min Cgelra Esvhfq Esfiet Pressure 8,6 bar Year of production 2005 Compressor after service, ready to work.

Condition: excellent (used), Functionality: fully functional, overall weight: 9,550 kg, fuel type: electric, Year of construction: 2018, machine/vehicle number: V9230, Equipment: type plate available, Centrifugal compressor, fixed rotary turbo type with a control range of 2300 - 6000 Nm3/h. Year of production: 2018 Technical condition of the compressor excellent, documentation complete. It is possible to buy transport and installation. Compressor to be seen in Bielsko-Biała. TECHNICAL DATA 1) Oil-free, three-stage. 2) Water-cooled. 3) Capacity control by IGV valve and bleeder valve. 4) Regulation in the range of about 2300 - 6000 Nm3/h. 5) Microprocessor controller Xe 145F with ambient control function performing measurement, control and control functions: (a) motor current measurement, b) motor hour counter, c) measurement of temperature and air pressure after each compressor stage and in the exhaust manifold (network), d) measurement of air pressure drop on compressor suction filters, e) measurement of temperature and pressure of oil in the compressor, Cjlra Esvi H E Hjfiegt f) measurement of the temperature of the stator windings of the 6 kV motor, g) measurement of the temperature of the bearings of the 6 kV motor, h) measurement of vibration of rotating assemblies of individual compressor stages, i) automatic operation of the circulating water valve, j) automatic operation of the auxiliary oil pump, k) automatic operation of the compressor in the mode of constant pressure, automatic unloading and compressor operation on the slack. (l) signaling of compressor cooling water flow failure, m) optical and acoustic signaling in the compressor room control room of emergency conditions. 6) Noise suppressor for the bleed valve. 7) Two-stage inlet filter. 8) PNLD lossless condensate drains. 9) Asynchronous squirrel-cage motor with parameters: (a) rated power: 700 kW, (b) degree of protection: IP23, c) supply voltage: 6kV, 50Hz, d) starting: direct, (e) cooling type: air, f) flanged, roller bearings Required: - Water cooling system - Foundation.

Condition: used, Year of construction: 1996, operating hours: 3,836 h, Field of application: Construction Make of engine: Deutz Capacity: 3,7 m³/m Cslrajq Ea A As Efijgt General condition: average Technical condition: average Visual appearance: average Compressor type: Screw compressors Working pressure: 7 bar Please contact Sales Department for more information

Condition: excellent (used), Year of construction: 2014, volume flow: 3.14 m³/h, operating pressure: 10 bar, Variable speed (Inverter) 22 kW motor Capacity 3.14m3/min Pressure 10 bar Cjlrsrurw Rja Efisgt Mileage 12800 Mtg Year of production 2014 The compressor is fully functional.

Condition: used, Year of construction: 2005, operating hours: 15,000 h, Field of application: Construction Empty weight: 1.425 kg Celra Efeq Ebareiogt Capacity: 11 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 2.19x0.93x1.85 Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2006, operating hours: 2,809 h, Field of application: Construction Empty weight: 700 kg Make of engine: Yanmar 3IRH8N Cslra Eetqlhgjfijgt Capacity: 3,1 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 1.7x0.95x0.9 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2008, operating hours: 4,040 h, Field of application: Construction Empty weight: 7.785 kg Make of engine: Caterpillar C15 Capacity: 33,1 m³/m Compressor type: Screw compressors Celronp Av Usa Efiogt Transport dimensions (LxWxH): 7.42x2.29x2.54 Working pressure: 24.1 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2003, operating hours: 9,361 h, Field of application: Construction Empty weight: 7.795 kg Make of engine: Caterpillar C15 Capacity: 33,1 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 5.55x2.25x2.48 Working pressure: 24.1 bar Cgelronp Awcoa Efiet Please contact Sales Department for more information

Condition: used, Year of construction: 1999, operating hours: 7,804 h, General information Cjlrjnp Av Hoa Efisgt Field of application: Construction Drivetrain Make of engine: cummins N14 Weights Empty weight: 7.167 kg Functional Capacity: 45 m³/m Condition General condition: average Technical condition: average Visual appearance: average Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 5.1x2.35x2.6 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Condition: used, Year of construction: 2009, operating hours: 3,026 h, fuel type: diesel, motor manufacturer: Ingersoll 4045TF270F, Field of application: Construction Empty weight: 2.067 kg Generator capacity: 60 kVA Cslrsq Ea T Nsa Efiegt Please contact Sales Department for more information

Condition: used, Year of construction: 2014, operating hours: 1,554 h, Field of application: Construction Cgelra Efjugq Stjist Empty weight: 1.600 kg Make of engine: Yanmar 4TNV98T Capacity: 7,2 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3.45x1.74x1.4 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2012, operating hours: 1,542 h, Field of application: Construction Empty weight: 1.200 kg Make of engine: Yanmar 4TN98-ZNIRED Capacity: 5,1 m³/m Compressor type: Screw compressors Cslrasugq Sme Efisgt Transport dimensions (LxWxH): 1.96x1.07x1.2 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2006, operating hours: 2,662 h, Field of application: Construction Celra Efoq Eaxxjiegt Empty weight: 3.000 kg Make of engine: John Deere 6068TF275 Capacity: 17 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 4.02x1.97x2 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2012, operating hours: 1,951 h, Field of application: Construction Empty weight: 1.200 kg Make of engine: Yanmar 4TNV98-ZNIRED Capacity: 5,1 m³/m Compressor type: Screw compressors Colrajq Eavvj Efiogt Transport dimensions (LxWxH): 2.75x1.45x1.37 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2012, operating hours: 1,979 h, Field of application: Construction Empty weight: 1.200 kg Make of engine: Yanmar 4TNV98-ZNIRED Capacity: 5,1 m³/m Compressor type: Screw compressors Working pressure: 7 bar Please contact Sales Department for more information Cslraonp Atve Efiegt

Condition: used, Year of construction: 2012, operating hours: 1,720 h, Field of application: Construction Empty weight: 1.200 kg Make of engine: Yanmar 4TNV98-ZNIRED Capacity: 5,1 m³/m Compressor type: Screw compressors Cgslra Efoub H H Asiot Working pressure: 7 bar Please contact Sales Department for more information

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Celra Ejrtrx Rsfiogt Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Cgolra Ejt Dbakefist Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle Cgeleu Axzkora Efiot - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: new, Year of construction: 1995, operating hours: 0 h, 1 piece stainless steel volute pump from Ingersoll Dresser in excellent condition. On base plate with coupling Colra Efec Ivaaoisgt Impeller and casing made of V2A stainless steel 316 (1.4401) Identical in construction to KSB CPK 100-250 Volume: 230 m³/h Conveying height: 70 m Speed: 2900 rpm Shaft power: 57 kW Required drive power: 75 KW With base plate without electric motor. Electric motor can be installed by us.

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 Refurbished Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer Accessories: CO2 fire extinguishing system, integrated cartridge filter system Cgslra Eov Avg Tjfiot Refurbished

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, distance table to quill: 585 mm, worktable length: 1,000 mm, worktable width: 760 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) Cgslov Sqz Rora Efist ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Celraou Tdm De Efijgt Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps (60 amp peak current) High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station