Used Ingersoll Rand 7/71 for sale (138)

Condition: excellent (used), Year of construction: 2020, INGERSOLL RAND refrigeration dryer Capacity 13 m3/min, Bwjlqsiuk D Do E Eifsl year of manufacture 2010 The dehumidifier is fully functional. I HAVE MORE COMPRESSORS FOR SALE SCREW REFRIGERATION DRYERS AND EQUIPMENT WELDING.

Condition: used, Year of construction: 2003, Field of application: Construction Bwslqjq Ea Afe E Eifsl Compressor type: Screw compressors Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, New: No Attachment suited for: Agricultural machines General condition: very good Technical condition: very good Visual appearance: good Damages: none Bwjlq Ejtyw Nzj Eifjl

Condition: excellent (used), Functionality: fully functional, overall weight: 9,550 kg, fuel type: electric, Year of construction: 2018, machine/vehicle number: V9230, Equipment: type plate available, Centrifugal compressor, fixed rotary turbo type with a control range of 2300 - 6000 Nm3/h. Year of production: 2018 Technical condition of the compressor excellent, documentation complete. It is possible to buy transport and installation. Compressor to be seen in Bielsko-Biała. TECHNICAL DATA 1) Oil-free, three-stage. 2) Water-cooled. 3) Capacity control by IGV valve and bleeder valve. 4) Regulation in the range of about 2300 - 6000 Nm3/h. 5) Microprocessor controller Xe 145F with ambient control function performing measurement, control and control functions: (a) motor current measurement, b) motor hour counter, Bolq Ejvi H E Hj Eifswl c) measurement of temperature and air pressure after each compressor stage and in the exhaust manifold (network), d) measurement of air pressure drop on compressor suction filters, e) measurement of temperature and pressure of oil in the compressor, f) measurement of the temperature of the stator windings of the 6 kV motor, g) measurement of the temperature of the bearings of the 6 kV motor, h) measurement of vibration of rotating assemblies of individual compressor stages, i) automatic operation of the circulating water valve, j) automatic operation of the auxiliary oil pump, k) automatic operation of the compressor in the mode of constant pressure, automatic unloading and compressor operation on the slack. (l) signaling of compressor cooling water flow failure, m) optical and acoustic signaling in the compressor room control room of emergency conditions. 6) Noise suppressor for the bleed valve. 7) Two-stage inlet filter. 8) PNLD lossless condensate drains. 9) Asynchronous squirrel-cage motor with parameters: (a) rated power: 700 kW, (b) degree of protection: IP23, c) supply voltage: 6kV, 50Hz, d) starting: direct, (e) cooling type: air, f) flanged, roller bearings Required: - Water cooling system - Foundation.

Condition: excellent (used), Year of construction: 2014, volume flow: 3.14 m³/h, operating pressure: 10 bar, Variable speed (Inverter) Bslq E Eiorurw Rsfjwl 22 kW motor Capacity 3.14m3/min Pressure 10 bar Mileage 12800 Mtg Year of production 2014 The compressor is fully functional.

Condition: used, Year of construction: 2000, Field of application: Construction Make of engine: Electrical Capacity: 11,61 m³/m Compressor type: Screw compressors Working pressure: 10 bar Bwolq E Eioq Eazlsfel Please contact Sales Department for more information

Condition: excellent (used), Year of construction: 2014, volume flow: 0.24 m³/h, operating pressure: 10 bar, INGERSOLL RAND R 2.2 - 10 screw compressor on a 200 l pressure tank 2.2 kw engine Capacity 0.25 m3/min Pressure 10 bar Year of production: 2014 Mileage 5547 hours Bolqsrur N Ae E Eifjwl THE COMPRESSOR IS FULLY FUNCTIONAL

Condition: used, Year of construction: 2006, operating hours: 6,061 h, General information Field of application: Construction Drivetrain Make of engine: John deere 4045HF275I Weights Empty weight: 2.150 kg Functional Capacity: 11 m³/m Condition General condition: average Technical condition: average Visual appearance: average Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.6x1.38x1.3 Working pressure: 9 bar Bwelq E Ejq Ea A Rsifel Additional information Please contact Sales Department for more information

Condition: used, Year of construction: 1994, operating hours: 46,474 h, Field of application: Construction Empty weight: 953 kg Capacity: 6,5 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 1.9x1.08x1.05 Belqeq Eay Is E Eifowl Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2015, operating hours: 3,759 h, Field of application: Construction Empty weight: 1.718 kg Make of engine: Three Fase Engine IR Capacity: 8,83 m³/m Bjlq E Eoq Ea D Ssifjwl Compressor type: Screw compressors Working pressure: 14 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2004, Field of application: Construction Empty weight: 1.048 kg Make of engine: Electric variable speed drive Capacity: 10,7 m³/m Compressor type: Screw compressors Bjlq E Eioq Eax Uefowl Transport dimensions (LxWxH): 1.5x1.4x1.9 Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, Year of construction: 1996, operating hours: 3,836 h, Field of application: Construction Make of engine: Deutz Capacity: 3,7 m³/m General condition: average Bwelq E Eioq Ea A Asfol Technical condition: average Visual appearance: average Compressor type: Screw compressors Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2005, operating hours: 15,000 h, Field of application: Construction Empty weight: 1.425 kg Capacity: 11 m³/m Compressor type: Screw compressors Bolqjq Ebaro E Eifswl Transport dimensions (LxWxH): 2.19x0.93x1.85 Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2008, operating hours: 4,040 h, Field of application: Construction Empty weight: 7.785 kg Belq E Eionp Av Uofswl Make of engine: Caterpillar C15 Capacity: 33,1 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 7.42x2.29x2.54 Working pressure: 24.1 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2003, operating hours: 9,361 h, Field of application: Construction Empty weight: 7.795 kg Make of engine: Caterpillar C15 Capacity: 33,1 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 5.55x2.25x2.48 Bslq E Eienp Awcsfewl Working pressure: 24.1 bar Please contact Sales Department for more information

Condition: used, Year of construction: 1999, operating hours: 7,804 h, General information Field of application: Construction Drivetrain Bslenp Av Hjq E Eifjwl Make of engine: cummins N14 Weights Empty weight: 7.167 kg Functional Capacity: 45 m³/m Condition General condition: average Technical condition: average Visual appearance: average Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 5.1x2.35x2.6 Working pressure: 7 bar Additional information Please contact Sales Department for more information

Condition: used, Year of construction: 2008, operating hours: 4,853 h, Field of application: Construction Empty weight: 2.200 kg Make of engine: John Deere 4045HF285 Capacity: 10,5 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 2.5x1.38x1.3 Working pressure: 10 bar Please contact Sales Department for more information Bwelq E Ejnp Aruoifol

Condition: used, Year of construction: 2009, operating hours: 3,026 h, fuel type: diesel, motor manufacturer: Ingersoll 4045TF270F, Field of application: Construction Empty weight: 2.067 kg Generator capacity: 60 kVA Please contact Sales Department for more information Bwslq E Esq Ea T Neifol

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Bslq E Eiertrx Refjwl Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 Refurbished Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Bolq E Eiev Avg Tofswl Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer Accessories: CO2 fire extinguishing system, integrated cartridge filter system Refurbished

Year of construction: 2007, Condition: ready for operation (used), General Data Bwelq E Eswgf Eloifol Measurements width 2010 mm Measurements depth 1234 mm Measurements height 2550 mm Machine weight 4000 kg Main Drive Spindle motor power 16 kVA Additional Equipment Load Capacity for Automatic Electrode Change: 15 kg This 3-axis OPS INGERSOLL Eagle 400 die-sinking EDM machine was manufactured in 2007. Ideal for precise metal removal processes, it offers robust construction and reliable performance. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Eagle 400 machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, 5-Axis CNC HSC Vertical Machining Centre with Pallet pool OPS Ingersoll Speed Hawk 650 Year 2009 Beljvy H Hreq E Eifjwl Andronic 2060 control Proposal Number MV-6444 Pallet size 320 x 320 mm X 550 mm Y 700 mm Z 450 mm 4th axis table rotation axis C 360° 5th axis table swivel axis A -120°/+60° 56 tool magazine positions 36000 rpm. Equipped with: Pallet pool with 5 EROWA pallets 320 x 320 mm. Fischer HF spindle. Glass scales in X,Y,Z …and much more Proposal reference MV-6444

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, distance table to quill: 585 mm, worktable length: 1,000 mm, worktable width: 760 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 Bwolqjv Sqz Re E Eifel EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2800 mm Measurements depth 2020 mm Measurements height 2450 mm Machine weight 8200 kg Control Unit Brand Heidenhain Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 1-42000 rpm Bwjljudd D Req E Eifjl Spindle motor power 15 kW Tool taper HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm B-Axis Movement -120°/+60° C-Axis Movement 40 rpm Table Outer length 650 Outer width 500 Tslots size 5 x 14H12 Number of tslots 100 Table load 500 kg Additional Equipment Tool Magazine Capacity: 100 positions This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre. Application Types Milling

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps (60 amp peak current) High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station Bwjlq E Esu Tdm Deifjl