Used Barford Sx 7000 for sale (1,772)

Condition: used, mileage: 155,000 km, Year of construction: 2021, Serial number: W1T9630201048xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18639 Specifications: Model year: 2021 EU approved until: 01.02.2025 Mileage: Approx. 155,000 km Engine power: 428 hp Drivetrain: 6x2 Transmission: Automatic Superconstruction: JOAB Suspension: Air suspension Engine brake Chamber: 1 chamber Auxiliary light Tool cabinet Radio Air conditioning/AC Rear view camera Microwave oven Full service history available Delivery by appointment Description: 2021 Mercedes Actros compactor truck with JOAB superconstruction for sale. The truck has done approx. 155,000 km and is well maintained, gold service agreement since new. It has full service history and is in good condition. Delivery can be arranged as needed. Km: 155000 HK: 428 Technical approved: Yes EU-approved until: 01.02.2026 Own weight: 16203 Dcelitevgyw Decbasg Total Weight: 27000 Payload: 10722 Width: 255 Length: 964 Kw: 315 Euro: 6 Gearbox: Automatic

Condition: ready for operation (used), Welding robot for big pieces The welding manipulators holding the workpiece can tilt up and down (max 45°) in order for the robot to be able to weld straight on the workpiece. This ensures the best possible weld. Cloos Romat 310 - 11 axes Rotrol 32 TM X-travel of robot: 11 000 mm Depth of throat: 2000 mm Max distance under robot: 3000 mm Max distance between manipulators: 10 000 mm Centerdistance of manipulators: 1750 mm each manipulator has a movement of 4000 mm Max height of workpiece: 3500 mm Dcolewhrylsitcbasg Max weight of workpiece: 25 ton 2 Cloos GLC 5033 Quinto welding scources linked in series to attain 1000 amp dimensions: 16 000 x 8000 x 7000 mm (foundation is needed) ----- Сварочный робот для больших, нестандартных заготовок. Сварочные манипуляторы позиционируют заготовку путем поворота и перемещения вверх-вниз (45°макс). Таким способом сварочный шов достигает максимальной точности. Производитель: Cloos Romat 310 - 11 координат Rotrol 32 TM Перемещение по оси Х: 11 000 мм Зев: 2000 мм Макс расстояние от сварочной головки до пола: 3000 мм Макс расстояние между манипуляторами: 10 000 мм Высота центра манипулятора: 1750 мм Перемещение каждого манипулятора: 4000 мм Макс высота заготовки: 3500 мм Макс вес заготовки: 25 тонн 2 сварочных источника: GLC 5033 Quinto - 1000 amp Размеры: 16 000 х 8000 х 7000 мм (требуется фундамент)

Condition: good (used), mileage: 592,179 km, power: 368 kW (500.34 HP), first registration: 08/2019, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 2,950 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - High Roof - Slider - Auxiliary Braking System = Remarks = Number of axles: 3, Configuration: 6x2, Tare weight: 9675 kg, Gross weight: 27000 kg, Total fuel capacity: 610 liters, Fifth wheel height: 119 cm, Fifth wheel: Slider, Number of locks: 1, Suspension type: Full air, Cabin type: High Roof, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Auxiliary heating, Color: White, Engine power: 368 kW (493 Hp), Euro: 6, Transmission type: Opti-cruise, Gears: 12, Auxiliary braking system, Retarder Brand: Scania, Power steering, ABS, ASR = Additional Information = Transmission Transmission: 12 gears, Automatic Dcjlewhuwyoitcbaeg Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Left tire profile: 8 mm; Right tire profile: 8 mm Axle 2: Tire size: 315/70R22.5; Dual tires; Left tire profile: 7 mm; Left tire profile: 7 mm; Right tire profile: 6 mm; Right tire profile: 8 mm Axle 3: Tire size: 315/70R22.5; Dual tires; Lift axle; Left tire profile: 7 mm; Left tire profile: 4 mm; Right tire profile: 6 mm Tire tread, right outer: 6 mm Dimensions Dimensions (L x W x H): 667 x 255 x 397 cm Weight Curb weight: 9,675 kg Payload: 17,325 kg GVW: 27,000 kg Maintenance General Technical Inspection (ATI): inspected until February 2026 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 3 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Stock number: cmj/0203 Dcslitcbsvkwlgjaeg Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: used, Functionality: fully functional, machine/vehicle number: A20700034, Year of construction: 2015, operating hours: 10,500 h, load capacity: 30,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: standard, construction height: 4,000 mm, power: 194 kW (263.77 HP), fork length: 2,500 mm, engine type: Cummins QSB 6,7, drive type: Diesel, net weight: 38,500 kg, Heavy duty forklift truck - Diesel Chassis number: A20700034 Load center: 1200 Fork width: 300 mm Fork thickness: 110 mm Mast type: Standard Transmission: Dana TE17000 ( Brand new ) Condition: Reconditioned without warranty Technical condition: good Front tires type: Air Front tires size: 16.00-25 Front tires Condition: 20 - 40% Rear tires Type: Air Rear tires Size: 16.00-25 Rear tires Condition: 20 - 40% Description: Transmission is new Gearbox is new In addition to this FABRICAT MODEL, we have approx. 150 heavy-duty forklifts, container stackers, reach stackers, forklift trucks & terminal tractors in our Oldenburg warehouse. Visit our homepage - hinrichs-Forklifts. Leasing, installment plan & financing at fair conditions are possible for us at any time. We are also happy to buy your used vehicle free of charge, even without you purchasing a vehicle from us. Give me a call Marco Levermann, I will be happy to advise you in detail about this FABRICAT MODEL. By the way: Our specialist forklift workshop specializes in the repair and overhaul of large trucks from 8 tons upwards. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, 3rd valve, 4th valve, Djlsuh Aupeitcbajcg

Condition: good (used), power: 618 kW (840.25 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,900 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT0775GKRFM00936 Djlitcbswhfw Djajcg Technical information Chassis type: rigid AdBlue system: Yes Make of engine: C27 Acert Top speed: 67 km/h Empty weight: 46.383 kg Functional Cargo space capacity: 42.000 l Condition Technical condition: good Visual appearance: good Other information Max. working load: 70000 kg Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,073x5,673x4,419 Production country: US Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, mileage: 218,200 km, Year of construction: 2015, Field of application: Freight transport Serial number: WDB9634201L98xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19083 Specifications car: - 2015 model - Km: approx. 218,200 - 6x4 - 626 hp - Wheelbase: 340/135 cm Dcelijvgz A Ietcbaeg - Retarder - Suspension: Air - Compressor horn - Tires (see pictures) - Automatic - Fridge - Bed - AC/climate - Delivery by agreement Specifications trailer: - 2018 model - 4 axle - Hydraulic driving bridge - Forced control - Delivery by agreement Description: 2015 Mercedes-Benz Actros 2563 tractor unit w/ 2018 Demarko machine trailer. The Mercedes has only traveled around 218,200 km. The trailer has studded tires on the 1st and 2nd axle. Delivery by agreement. Km: 218200 HK: 625 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 9800 Total Weight: 27000 Payload: 17200 Width: 255 Length: 697 Euro: 6 Gearbox: Automatic

Condition: ready for operation (used), passage width: 1,000 mm, load capacity: 6,000,000 kg, Ideal for automotive parts, deepdraw parts in limited numbers: simple tooling automatic feed in out table 2 hydraulic cilinders each with a diameter of 1000 mm used as rubber die press, but can also be used for various other deformation processes max workpiece height: 250 mm Dcolitcbowhr A Teajg Gummikissenziehpresse - Presse à caoutchouc - Elasto forming presx - Elastomer press Dimensions of the table: 3000 x 800 mm

Condition: used, Year of construction: 2023, operating hours: 13 h, fuel type: diesel, General information Field of application: Construction Djlitoub Ih Iocbajcg Serial number: C170003444 Weights Empty weight: 3.350 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.200 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1255 m Transport dimensions (LxWxH): 6.44x1.4x1.98 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: new, Year of construction: 2021, Exhibition machine Dcelitcbekwhapjajg Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen

Condition: good (used), Year of construction: 2004, Technical details x-travel 1300 mm y-travel 1100 mm z-travel 1000 mm Control Mazatrol PC Fusion 640 M Djlswhvmvjitcbascg total power requirement 64,6 kVA weight of the machine ca. 24 t Additional information Equipment: CNC control Mazak Mazatrol PC Fusion 640 M With Performance CNC package EIA / ISO conversion Internal coolant supply through the work spindle with 70 bar pump pressure but without coolant tank. Preparation of measuring device for Renishaw Tool length measurement up to 600 mm With 10-fold pallet changer PALLETECH B-axis 360° x 1° (deg) Tool changer 240-fold TOOL-HIVE (modified to 50% higher speed) Max. tool length 652 mm Max. tool diameter 135 mm, with free adjacent space 260 mm Tool weight 30 kg Chip conveyor Machine documentation Technical data: Max. workpiece diameter (interference circle) diameter 1250 mm Max. workpiece height 1250 mm Transverse movement of the column, X-axis 1300 mm Vertical movement of the spindle head, Y-axis 1100 mm Longitudinal movement of the table, Z-axis 1000 mm Distance from spindle center to pallet center 150 to 1150 mm Distance from spindle center to pallet surface 100 to 1200 mm Pallet size 800 x 800 mm Workpiece weight (pallet load) evenly loaded 2200 kg Pallet changing time 13 seconds Table switching 1° x 360 positions Spindle speed range 35 to 7000 rpm Torque increased with 2 gear levels Tool holder BT/SK 50 Main motor 15 minute power 30 kW / continuous power 22 kW Max. torque 1177 Nm Inner diameter of spindle bearing 100 mm Rapid traverse speed 40000 mm/min. Cutting feed 40000 mm/min. Machine dimensions (standard specification) Height (measured from ground) 3527 mm Width 4353 mm Depth 6900 mm Weight (standard specification) 24 t Power supply 64.6 kVA

Condition: good (used), Year of construction: 2012, turning diameter 320 mm turning length 750 mm control Heidenhain MANUALplus 620 Number of working hours 13000 h turning diameter over bed slide 150 mm cross movement 200 mm speeds V-konstant = 1-4000 U/min Dcolitev Dmpzscbaog transmission ratio 2 spindle head Din 55022, Gr. 5 spindle bore 52 mm feeds cross mm/min. feed longitudinal - mm/min rapid travel - longitudinal/face 5/10 m/min thread pitch 0,01-999,9 mm power feed longitudinal 7000 N tailstock quill taper MT 4 tailstock - quill stroke 140 mm turret (x-stations) 8 x 30 mm total power requirement 16 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,7 x 1,9 x 1,6 m Very well-preserved cycle lathe, made by DMT-Kern/ Germany, from the prototype workshop, with cycle control Heidenhain MANUALplus 620 HCSI, with 8-way tool changer WITH 8 driven tool positions and separate C-axis with brake, is activated when drilling/turning threads, holes with a bolt circle (off-center) or in milling operation. Prism/flat bed guide hardened and ground, slide guideways covered, digital servo motors lengthways and plane, protective cover and sliding door, combination operating station with optimalaccess to the work area and can be moved over the entire length of the machine. Sold due to free funds for the purchase of a new machine, delivery at the beginning of May 2025. Machine dealer with own stock of 1600 m².

Condition: used, mileage: 520,000 km, Year of construction: 2012, Serial number: YS2R6X4000207xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15461 Specifications: - Km: 542 000 - Gear: Automatic - Retarder - Suspension: Steel - Euro 5 - Okay tires - Snowrigged - Prepared for spreader - 6x4 - Extra light - Rotor beam - Light bulb - Trailer hitch - VBG - Replaced clutch and gearbox earlier - Bed - Radio/CD - Climate/AC - Service history Description: Scania R560 6x4 Tipper from 2012. The truck is snowrigged and ready for spreader. Replaced clutch and gearbox earlier.  Ready for delivery. Km: 520000 HK: 560 Technical approved: no EU-approved until: 28.09.2024 Own weight: 13720 Total Weight: 27000 Payload: 13205 Width: 255 Dslitcjvg Nxqsbajcg Length: 750 Kw: 412 Euro: 5 Gearbox: Automatic

Condition: ready for operation (used), total height: 4,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), load capacity: 400,000 kg, net weight: 85,000 kg, total depth: 5,900 mm, Gantry straightening press400 ton For straightening shafts, steels castings, rolled products, open-die forgings, flat steel but also pressing in/out bearings, bushes, shrink rings,... Delitcbewhrwkoajcg 14 individual counter pressure cylinders in the table - 3 ton cap per cilinder - 100 mm stroke per cilinder - 300 kg/cm² Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Dcolitoviwdmjcbasg Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Dolsn Hx Tleitcbajcg Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Delitcbswhvdzoaecg Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 13,730 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, mast type: duplex, power: 185 kW (251.53 HP), total length: 6,900 mm, engine type: Volvo TAD781VE, drive type: Diesel, construction width: 4,600 mm, net weight: 43,720 kg, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: Dana TE17000 Condition: Ready for use and fully functional Technical condition: very good Front tires type: Air Front tires Size: 14.00-24 Front tires Condition: 80 - 100% Dcjlitcjwhgzkobaog Rear tires Type: Air Rear tires Size: 14.00-24 Rear tires Condition: 40 - 60% 20-40 sidelift-spreader C-type for double box handling electrical pre-heating for engine, hydraulic oil and cabin (380V) rear view camera with 7' display central greasing system raised air-intake with cyclone pre-cleaner for engine hydraulic accumulators for lifting suspension autom. shutdown of engine after 10min running idle autom. spreader adjustment 20'-40' with 30' stop active tire pressure control system, diesel parking heater SmartFleet RMI system 10 extra working lights on cab roof, front fenders and mast Globetrotter cabin with more interior height cabin is hydr. tilting backwards for 10° (manual/automatic) electronic air-condition air suspended driver seat with heating and seat belt 2nd training seat with seat belt joystick control

Condition: used, Year of construction: 2008, Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19181 Specifications: - 2008 model - Km: Owner says it is between 800-900,000 - 6x2 - Zepro lift - Suspension: Air - Retarder - Turbo replaced in 2018 - Sandspreader - Tires (see pictures) - Extra lights - Damage to the right side - Damage under the truck (see picture) - AC/climate - Ready for delivery Description: 2008 Scania R480 rep. object. Owner says the truck has covered somewhere between 800,000 and 900,000 km. The turbo was changed on it after it overturned. The truck overturned on its side. It was started a month ago when they were going to remove the box. Dolitcevg Azfjbascg Is something hanging under the truck. Ready for delivery. HK: 480 Technical approved: no EU-approved until: 30.04.2018 Own weight: 14360 Total Weight: 27000 Payload: 12565 Width: 260 Length: 1128 Euro: 4

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: IntNr231212, Star Bros. SR - 32 Year 1998 Operating hours 60931 IntNo231025 Control: CNC Fanuc 18i Tb Machining diameter: max. 32mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 (driven and smooth tools) Coolant used in the machine: Oil CE declaration of conformity According to seller: Fanuc cross drive drive system defective and was deactivated by Star Micronics. Dimensions of the machine 1700x2512x1700 mm Weight of the machine 2900 kg Bar loading magazine FMB TURBO 5-42. Bar capacity 5-42 mm attachment variant "A" Hinged belt conveyor MAYFRAN Kraft and Bauer extinguishing system and CO2 extinguishing agent container (10 kg) Operating and maintenance manual Operating tools Machine dimensions: approx. 1700 x 2512 x 1700 [mm] Machine weight: approx. 2900 [kg] Loading magazine dimensions: approx. 4500 x 1000 x 1800 [mm] Weight of loading magazine: approx. 1800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 200 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Used. Star SR - 32 Year 1998 Operating hours 60931 Control: CNC Fanuc 18i Tb Machining diameter: max. 32mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 (driven and smooth tools) Coolant used in the machine: Oil CE declaration of conformity Operating and maintenance manual Operating tools According to the sender: Fanuc transverse drive system defective and was deactivated by Star Micronics. Dslitcewh R Uzebaocg Machine dimensions 1700x2512x1700 mm Weight of the machine 2900 kg Bar feeder FMB TURBO 5-42. Bar capacity 5-42 mm attachment variant "A" Hinged belt conveyor MAYFRAN Small extinguishing system Kraft and Bauer and extinguishing agent container CO2 (10 kg) Machine dimensions: approx. 1700 x 2512 x 1700 [mm] Machine weight: approx. 2900 [kg] Loading magazine dimensions: approx. 4500 x 1000 x 1800 [mm] Weight of loading magazine: approx. 1800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 200 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, mileage: 900,000 km, Year of construction: 2009, Field of application: Freight transport Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19652 Truck specifications: - 2009 model - Km: Approx. 900.000 - Euro 4 engine - 500 HP - Automatic transmission - Retarder - 6x2 - Tires (see pictures) - Climate - Light - Radio - Delivery by agreement Dcolitsvyd T Nocbaeg Specifications hinge: - 1990 model - 4 axles - Lift on 1 and 2 axles - Swing on 3rd and 4th axle - Internal length of stage 1: 4,464 m - Internal length of stage 2: 8,709 m - Total internal length: 13,230 m - Manual widening - Tires (see pictures) - Hydraulic driving bridges - Delivery by agreement Description: Scania R500 truck with 4 axles damm machine semi-trailer Both the truck and trailer are EU approved. Should be seen. Delivery by agreement. Km: 900000 HK: 500 Technical approved: Yes EU-approved until: 16.04.2025 Own weight: 9860 Total Weight: 27000 Payload: 17065 Width: 255 Length: 720 Euro: 4 Gearbox: Automatic

Condition: used, mileage: 180,000 km, Year of construction: 2021, Serial number: W1T9630201051xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17610 Specifications: - 2021 model - Km: approx. 180,000 (will ke) - Suspension: Air - Automatic - Tires (see pictures) - Retarder - Carrier cooling/freezer unit - Zepro lift - Side door - Inside length: approx. 825 cm - Internal height: approx. 250 cm - Net weight: 13,320 kg - Euro 6 - Reversing camera - Extra lights - Compressor horn - Tool box - Radio/cd - Climate/ac - Service history Description: 2021 Mercedes Actros 4x2 box truck. Tarfurgo cabinet with Carrier fridge/freezer unit. The truxk has a service agreement and is ready to be put into operation. Delivery by agreement. Km: 180000 Dcjlitcbjvgy Enoajg HK: 428 Technical approved: Yes EU-approved until: 06.08.2025 Own weight: 13320 Total Weight: 27000 Payload: 13605 Width: 260 Length: 1086,5 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 158,000 km, Year of construction: 2023, Field of application: Freight transport Serial number: XLRTSF5300G46xxxx Dolitcbjvyfn Usajcg Please contact ATS Norway AS for more information Please provide reference number upon request: 19586 Specifications: EU approved until: 18.07.2025 Model year: 2023 Mileage: approx. 158,000 Transmission: Automatic Tires: Good condition Length: 717 cm Width: 255 cm Wheelbase: 340/140 cm Curb weight: 9,310 kg Drivetrain: 6x2 Power: 530 hp Tool cabinet Compressor horn Refrigerator 2 beds Radio/CD Air conditioning/AC Description: 2023 DAF XG 530 6x2 tractor unit for sale. This tractor unit is EU approved until 18.07.2025 and is ready for operation. It has an automatic transmission and is well equipped with, among other things, a tool cabinet, a refrigerator, and two beds. The vehicle can be delivered at short notice. Km: 158000 HK: 530 Technical approved: Yes EU-approved until: 18.07.2025 Own weight: 9310 Total Weight: 27000 Payload: 17690 Width: 255 Length: 717 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 670,000 km, Year of construction: 2009, Serial number: WJME2NWH40436xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19528 Specifications: EU-approved until 31.05.2025 Model year: 2009 Mileage: approx. 670,000 km Tires (see pictures) Full side opening Tail lift capacity: 1500 kg Interior length: approx. 753 cm Interior height: approx. 254 cm Euro 5 Heated cargo area Overall length: 1,018 cm Width: 255 cm Curb weight: 11,540 kg Tow bar (VBG) Power: 560 hp Radio/CD player Air conditioning (AC) Description: 2009 Iveco 560 box truck with a full side opening and a 1500 kg tail lift. The vehicle is equipped with a heated cargo area for optimal temperature control. It is EU-approved until May 31, 2025, and can be delivered quickly. Dslitcbevyfywsaecg Km: 670000 HK: 560 Technical approved: Yes EU-approved until: 31.05.2025 Own weight: 11540 Total Weight: 27000 Payload: 15385 Width: 255 Length: 1018 Euro: 5

Condition: used, mileage: 440,000 km, Year of construction: 2011, Serial number: XLEP6X2000527xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19606 Specifications: - Km: Approx. 440,000 - Transmission: Automatic - Engine brake - Euro 5 - Okay tires - JOAB construction - 21m3 - Weight - Printer - 400 HP - Winch Dslitcbevyf Nfsajcg - 1 chamber - Tool cabinet - Radio/CD - Air conditioning/AC - Ready for delivery Description: Scania P400 from 2011 with Joab construction. 1 chamber with 21 m3. The attachment needs maintenance (see pictures). Ready for delivery. Km: 440000 HK: 399 Technical approved: Yes EU-approved until: 06.07.2025 Own weight: 16160 Total Weight: 27000 Payload: 10765 Width: 255 Length: 924 Euro: 5 Gearbox: Automatic