Used All-Kor Akt 600 for sale (68,023)

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm Folovuuh Teimw Ucsgb pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, For sale: Ditch Witch At40 All Terrain (2018) Rock system and Jet. System Truck Man Recycle AT-Boretec Tigges (2022). Both in perfect condition ready to drill immediately. Rock master included. Ditch Witch AT40 All Terrain Year: 2018 Hours: 3000h Full rod box Top condition System Truck Man Recycle AT-Boretec Tigges (2022). Fgjliewgmhbjmw Ucjb Male Tgx 26,560 Year: 2016/12 HP: 560 KW: 412 KM: 479,315 km 28,000 kg 3 axles In German registration Very good condition Recycle system truck HS2 AT-Boretec Tigges HDD system truck: size 375RB-10,000 no.117-5000 Year: 2022 Hours: 1682h 4 cylinder diesel engine Kubota Bentonit tank 1: 4000l Bentonit tank 2: 4000l Recycling tank 3: 2000l Clean water tank 4: 1000l In perfect condition

Condition: ready for operation (used), Year of construction: 1963, Functionality: fully functional, machine/vehicle number: 3204, turning length: 1,000 mm, turning diameter: 600 mm, Equipment: - Three-jaw chuck 250 mm diam. - Four-jaw chuck 250 mm diam. - MULTFIX tool quick-change system size C, incl. 4 pcs. change holder - With center point Fgolimjumi R Nsw Ucjb - Quick-change drill chuck MK5 - Documentation

Condition: good (used), Joke lapping machine EL 600 - with accessories - with lapping agent pump & pressure device Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent. Fgjlimjvbwkqow Ucob

Condition: used, Year of construction: 2016, machine/vehicle number: DR18390616, This Ocean River 600 starting hole EDM machine is being auctioned online in our insolvency auction for Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). Fjlimw Uowhc A Rocegb You can find this and many other items on our platform.

Condition: excellent (used), color: black, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 309 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Böcker Weights Empty weight: 3.420 kg Functional Lifting capacity: 2.400 kg Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Folimwewb Htas Ucegb Latest inspection: 2024-09-02 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 36e Electric Crane 230V construction year 09-2023 with only 309 hours from the first owner. Machine is like new and has among other things: hydraulic wheel drive operable from the remote, hydraulic support legs operable also from the remote, hydraulic jib and radio remote control. Purchase invoice available, the chassis and the crane are both in the same color. Changes and typographical errors reserved.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) Fjlisvut Dyemw Ucogb yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Year of construction: 1984, Condition: excellent (used), Frame saw with 600 stroke Felimsfym Edsw Ucsgb width 950 mm height 915 mm power 132 KW

Condition: used, CNC flat steel drilling and cutting machine or plate drilling and cutting machine PEDDINGHAUS Type FDB 600 Plate drilling and cutting machine with CNC control FAGOR 8055i Machine No. 47615 Year of manufacture 2020 Cutting width 80-600 mm Oxygen cutting up to 50 mm steel Maximum passage height 120 mm Track length 6 mm Oxygen torch cutting speed 200 to 750 mm/min. Drilling capacity Ø 8 to Ø 40 mm Drill spindle mount MK4 Spindle speed (Stindel 1) 150 + 300 rpm Spindle speed (Stindel 2) 210 + 420 rpm Spindle speed (Stindel 3) 285 + 570 rpm Number of drilling spindles: 3 Spindle drive power: 9.6 kW Hydraulic motor power: 5.5 kW Power supply: 400 volts, 50 Hz - Flexible with 3 spindles for drilling with HSS coolant hole drills in various diameters - Feed speed per spindle, manually adjustable from 50 to 200 mm min. - Center punching or spot drilling by cyclic marking - Air-oil minimum quantity lubrication (air spray cooling system) with continuous compressed air supply - Two hydraulic material clamps in the drilling unit - Oxyacetylene torch (gas/oxygen) with torch monitoring and automatic ignition - 6-meter infeed roller conveyor (length 640 cm x width 105 cm) Fgelimw Uewcrcpecjb - 1.3-meter outfeed roller conveyor (length 130 cm) - Hydraulic unit adjacent (80 x 65 cm x height 1660 cm) - CNC control in the control panel Adjacent - PC monitor and keyboard built into the control panel - Machine operates with software (Windows "Steel Office") - Includes several coolant hole twist drills Transportation for space requirements: Length: 860 cm, Width: 240 cm, Height: 255 cm Space requirements of the base machine: Length: 180 cm, Width: 235 cm, Height: 255 cm Weight of the base machine: approx. 5.5 tons Weight of roller conveyors: approx. 1 ton Very good condition, ready for immediate use Ideal for cutting and drilling flange plates, base plates, and flange rings with holes Also very suitable for drilling stair stringers and other profiles up to 600 mm wide and 120 mm high. First, the flat steel is drilled or center-punched with HSS coolant hole drills, then the workpiece is burnt out.

Condition: good (used), MAHO C axis machine table - Table diameter: 600 mm Good condition fully functional can be inspected and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. Fgjljic Rvqsimw Uceb For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,424 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Fsljwdbbkjimw Ucjgb This 5-axis +GF+ AGIE CHARMILLES MIKRON UCP 600 Vario was manufactured in 2008. Ideal for complex geometries, this vertical machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ AGIE CHARMILLES MIKRON UCP 600 Vario vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, Resaw Horizontal - VIKI 600-50: Saw wheel diameter: 780mm Band saw width: 40-50mm Max. sawing width: 600mm Fgjlimowhi Ugjw Ucob Max. sawing height: 450mm Min. sawing height: 1,0mm Feeding speed: 0,1 - 20 Meter/minute Motor power: 18,5kW Feeding Motor: 0,75kW Machine weight: 1600kg Blade tension: Hydraulic Digital control sawing thickness setting

Condition: good (used), Year of construction: 1992, Operating hours: 45,580, Spindle hours: 14,543, CNC rotary table, travel (XYZ): 600 x 450 x 450 mm, Max. spindle speed: 4,500 rpm, 16-station SK40 tool changer, Control: PHILIPS 432 Fjlimwowc Tmis Ucegb

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, Full creel make Esterer type HDS 600 year 1990 Fjlisrmmqzjmw Ucsgb Passage width 735 mm Stroke 600 The machine fits on the foundation of the HDS 700 can be viewed in 36110 Schlitz in the factory at Scheibner GmbH

Condition: good (used), Year of construction: 2004, Ref. no.: 18481 Hersteller: ARBURG Type: 320 C 600 – 250 Year of construction: 2004 Fslimw Uswgp Ahocegb Clamping unit Clamping force: 60 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 200 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 mm Injection volume: 45 cm³ Shot weight: 40 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 X 1,5 X 1,7 m Machine weight: 2330 kg

Condition: used, mileage: 800,700 km, power: 441 kW (599.59 HP), first registration: 02/2011, fuel type: diesel, color: other, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, parking heater, sleeping cabin, spoiler, = Additional options and accessories = - Above bed - Air horn - Alloy wheels - Electrically adjustable exterior mirrors - Electric windows - Fog lights - High Beams - Hub Reduction - Hydraulics - Immobilizer - I shift - Power steering - PTO - Radio - Sleeping cabin - Speed limiter - Sper - Toolbox - Work lamp(s) = Remarks = Volvo FH 16 - 600, 2011, 800,700 km, Euro 5, 6x4 with Hub Reduction, Globetrotter XL, Retarder, Hydraulics = More information = Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Double wheels; Reduction: hub reduction; Suspension: air suspension Max. towing weight: 80.000 kg Fgslowgbqqjimw Ucob Number of beds: 2 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 45,726 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Fgjlijwdbbdomw Ucjb This 5-axis MIKRON UCP 600 Vario was manufactured in 2007. Ideal for complex geometries and multi-sided machining, this vertical machining centre offers precision and versatility. Consider the opportunity to buy this MIKRON UCP 600 Vario vertical machining centre. Contact us for more information. Application Types Milling

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Fgolimw Uegw Sxzocjb Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, mileage: 186,162 km, power: 155 kW (210.74 HP), first registration: 04/2019, overall weight: 8,600 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 2,950 kg, empty load weight: 5,650 kg, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,200 mm, loading space length: 3,700 mm, loading space height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, airbag, cabin, central locking, cooling unit, differential lock, onboard computer, seat heater, tail-lift, * Frozen and fresh food delivery vans * Tail lift with radio remote control * Very rare version with short body and only 3.20 m tail lift * Ideal for deliveries in inner cities * Only 186,162 kilometers * Carrier Xarios 600 freezer * From -20°C to +18°C * Diesel and electric drive * Very flat evaporator for optimal loading * Interior dimensions 3.70 m x 2.20 m x 2.20 m * Aluminum loading floor * Lashing rails left and right * LED lighting * Rear wing doors * Dautel DL 1000 tail lift with cable and radio remote control * High payload 2,950 kg * GVW Can be reduced to 7,490 kg without technical modifications. * Air-suspended driver's seat * Heated seats * Automatic transmission * Air conditioning * Lane keeping system Fjlimowgnupsw Ucsgb * Multifunction steering wheel * Cruise control * Electric windows * Heated electric mirrors * Leaf-type air suspension + raise/lower * Carrier Data Cold 600 control panel in the driver's cab * Bluetooth telephone * Differential lock * Engine brake * GVW 8,600 kg * Unladen weight 5,650 kg * Payload 2,950 kg * With GVW 7,490 kg, payload 1,840 kg If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops. Our quote is generally WITHOUT a new TÜV inspection, without a new DGUV (German Road Safety Inspection Association), without a new SP (Special Vehicle Inspection Authority), and without a new UVV (Anti-Injury Prevention Regulation). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not under any misconceptions about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is responsible for verifying the condition and equipment of the goods/vehicles independently. Subject to changes, prior sale, and errors. - .

Condition: used, fuel type: diesel, color: red, mast type: telescopic, Year of construction: 2018, operating hours: 2,049 h, Year of manufacture: 2018 Field of application: Construction Drive: Wheel Empty weight: 3.650 kg CE mark: yes Paus PTK 31. Year: 2018. Hours: 2049. Max weight: 3650 kg. CE Machine. Axle load: 1: 1750 kg. Felimwowgdmno Ucegb 2: 1750 kg. Moover. 4 point outriggers. Radio Remote Control. Diesel. Max working height: 31 meter. Max outreach: 24.5 meter. Tyres: 195R14 80%. German Machine! ID NR: 180. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Fgjlimw Uswgpxpeceb Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 430, workpiece height (max.): 528 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 200 kg, table width: 465 mm, table length: 800 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 34, CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 Rapid traverse m/min: 35 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 200 T-Slot version: 14 H7 Spindle Spindle speed rpm: 12.000 Tool system Tool holder: SK 40 Tool magazine slots: 30 With free neighboring places mm: 125 Max. Tool Diameter: 90 Max. Tool Length mm: 250 Tool Magazine: UTC 34 Max tool weight kg: 8 Equipment Electronic Handwheel Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 200 High-pressure bar: 40L / min to 3 bar Machine running times Rated power kVA: 22 Basic machine dimensions / weight Fgelowb D Axoimw Ucob Length mm: 2500 Width mm: 2020 Height mm: 2750 Weight kg: 6.060

Condition: excellent (used), Year of construction: 2002, Residual wood shredder / chipper Year of construction 10/ 2002 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Profile rotor with 14 round knives Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 15.0 kW CE Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg NEW CUTTING BLADES NEW ROTOR BEARINGS NEW ROTOR BLOCKS NEW SLIDER GUIDES NEW V-RIEMS NEW GEAR OIL Automatic star-delta start-up Switch cabinet with PLC control and 5 meter cable harness Automatic shutdown when hopper is empty Safety package with gearbox limit switch Fgjleqxbc Doimw Ucob Vibration-damping machine feet Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Felewgpwfjimw Ucegb Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Fgelimw Uev Dg A Uecjb Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V