Used Ciata Monomig 190 for sale (5,018)

Condition: used, mileage: 10,350 km, lifting height: 35,000 mm, Year of construction: 2023, operating hours: 994 h, General information Field of application: Construction Serial number: 1190603 Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 19.640 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Fgolnjvbaqgo Ia Rhsb Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00453, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 125 kg, Refurbished FANUC R-2000iB/125L manufactured in 2012.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2012.07 Fgjlswhvwzon Ia Rhjb Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.07 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,666 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mmm Shot weight 451 g Stroke volume 475 cm³ Fgelowg Iaren Ia Rhsb Clamping Unit Clamping force 180 T This Victor VS180 was manufactured in 2003. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2014, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 1.340 kg Functional Lifting capacity: 200 kg Lift height: 193 cm Working height: 1.240 cm Condition Technical condition: good Visual appearance: good Other information Max. horizontal reach: 610 m Transport dimensions (LxWxH): 4,59 x 1,56/1,10 x 1,93 m Foln Isv Ti Uxea Rhogb Additional information Please contact Christian Theißen for more information Units: 7965 Manufacturer: Niftylift Model: N120TAC Year of build: 2014 Condition: Used Data: Max. working height: 12,37 m Platform height: 10,37 m Max. reach: 6,10 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,10 x 0,67 m Swivel range: 2x 190° Total dimensions LxWxH: 4,59 x 1,56/1,10 x 1,93 m Wheel pressure max.: 9,4 kN Ground clearance: 0,21 m Support width both sides: 3,54 m Support length: 3,70 m Support diagonal: 5,03 m Ground pressure: 75 kg Drive type: 230 V Own weight: 1.340 kg Special features: telescopic axis and The lighting strip can be removed, which changes it Device width to 1.10 m. Information: Location: Magdeburg immediately available

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 9,663 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: standard, construction height: 2,750 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, total length: 3,250 mm, drive type: Elektro, construction width: 1,600 mm, net weight: 10,308 kg, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 355/65-15 non-marking Rear tires type: super elastic Rear tires size: 28x9-15 non-marking Fgolju Dzddon Ia Rhjb Battery voltage: 80V Battery Ah: 980Ah Battery year of manufacture: 2022 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle without you having to buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF70-6C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We are also happy to display your vehicle for commission sale. Side shift, fork positioner, Distance between the wheels (front-rear) - 1900 mm

Condition: used, ALZMETALL Type AB 3 ESV Pillar Drill Machine No. 20714, Year of Manufacture: 1990 Drilling Capacity: 32 mm Feln Ia Rewihgqehsgb Spindle Mount: MT 3 - Short Spindle Throat: 285 mm Spindle Stroke: 160 mm Table Size: 615 x 370 mm Column Diameter: 130 mm Spindle Speed: 65 - 1750 rpm Continuously variable Automatic feed 0.1 - 0.2 - 0.3 mm/rev Motor power 1 and 1.8 kW, pole-changing Power supply 380 volts, 50 Hz - Spindle speed via 2 motor speeds, 2 gear stages, and variator gearbox - Countershaft speed for high torque at low speeds - Automatic feed with electromagnetic clutch and button on the cross-handle - Thread cutting device with forward/reverse rotation - Foot switch for reverse rotation - Table height adjustment via hand crank - Tachometer for spindle speed - Emergency stop - Lighting device - Albrecht keyless chuck 1-13 mm Space required L x W x H 950 x 7000 x 1900 mm Weight 430 kg Good condition

Condition: used, Year of construction: 2021, operating hours: 746 h, fuel type: diesel, Equipment: all wheel drive, Field of application: Construction Drive: Wheel Fsln Iastr Nfqo Rhsgb Empty weight: 9.190 kg Lifting capacity: 680 kg Working height: 1.800 cm Serial number: MC19 Transport dimensions (LxWxH): 4.88x2.27x3.19 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-150 mm Hess Junior single wood sander ----- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles Feln Iaot Tqylj Rhegb with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full transmission of the 5.5 kW drive power of the grinding motors on the grinding belt. This means the strongest chip removal possible. Automatic machine stop triggering if the tape breaks. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding lining. Easy to use pad change. Abrasive belt tension over appropriately dimensioned compression springs. Sanding belt relaxation for belt change by means of pneumatic Device for sensitive, distortion-free loading of new tapes. Upper Grinding unit and brush device (additional equipment) centrally motorized adjustable. Timber guide in the entry area for hard guide and guide rails supported on both sides pinch rollers. Tilt-proof transport of profiled workpieces calibrated conveyor belts with continuously adjustable feed rate. Automatic machine stop triggering by wood thickness control device. Optical display of the control panel. Infeed table via fine, precise threaded spindle for lower Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The length Column table guidance guarantees an absolute parallel adjustment. The Adjustment of the flight circle to the outfeed table is achieved by adjusting the height of the lower one Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functional, operating and display elements on the front of the machine: grinding unit below, Grinding unit above, workpiece transport device, Grinding thickness setting, brushing device above/below, belt utilization, Operating display, fault display. All motors are against overload electrically secured. Technical specifications : ----- Sanding belt speed: 25 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection : 400 V., 3/N, 50 Hz. Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW height adjustment : 0.18 kW Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air quantity: 2 x 2000 to 2500 m3/h 20 - 25 m/sec. Extraction connection piece: 2 x 180 mm dia, on top of the machine housing External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000 m...

Condition: ready for operation (used), Year of construction: 1999, operating hours: 4,937 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T Max open daylight 970 mm Distance between bars 510 x 510 mm Mould height min 200 mm Mould height max 500 mm Fgeln Iajwg Ia Eo Rhsb This Victor VS180 was manufactured in 1999. A hydraulic injection moulding machine, it offers robust performance for various plastic processing applications. Consider the opportunity to buy this Victor VS180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2010, sheet width 3100 mm plate thickness 14.0 mm ST pre-bending 12.0 mm ST diameter of upper rolls ~ 290 mm side roll diameter ~ 210 mm diameter of lower rolls ~ 270 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 125 Liter voltage 380 V total power requirement 11.0 kW weight 9000 kg range L-W-H 4800 x 1900 x 1600 mm Very good condition (!!) Current new price including accessories approx. 110.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine * ??4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" Fgeln Iewhquboa Rhjb * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Permanent lubrication of all components Bearings - Sturdy welded steel construction - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg Foln Ia Rjwhu Urehjgb with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: used, Year of construction: 2018, operating hours: 7,900 h, Field of application: Construction Serial number: 312716-Cxxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19079 Specifications: - 2018 model - Certified until 05.25 - Hours: Approx. 7900 - Weight: 34,000 - Undercarriage (see pictures) - Belt width: 60 cm - Total width: Approx. 3 m - Tilt cabin - Rototilt - Oilqucik - Only 1 owner - Reversing camera - Side camera - Range: Approx. - Central grease - Webasto - Extra fendering - Extra counterweight lot - Radio/CD - Climate/AC - On gold agreement with Volvo - Video Fgjlsvgz Spsn Ia Rheb - Ready for delivery Description: Volvo EC300ENL from 2018 with 7900 hours. The machines have a cabin and have entered into a gold agreement with Volvo. It is sold with rototilt and oilquick. Ready for delivery. Hours: 7900 Total Weight: 34000

Condition: used, Year of construction: 2015, General information Field of application: Construction Serial number: 15019 Drivetrain Type of fuel: LPG Weights Empty weight: 6.010 kg Fgolotr Nqfjn Ia Rheb Functional Mast: articulated arm Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Fgslnswhuh Se Ia Rheb Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit Foln Iasu R Sy Ao Rhsgb - New exhibition machine -

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Fgoljwhu N Nsn Ia Rhjb Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp

Condition: used, lifting height: 35,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 1190603 Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Feln Istvlptsa Rhogb Lifting capacity: 19.640 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Condition: Well maintained (serviced annually) Operating hours: Approx. 7000 Equipment: Basic machine Accura 1558 Performance with belt bridge Incl. air cushion table with long infeed ruler Incl. guide system BS703 Incl. edge feed 1901 fully automatic Incl. joint milling unit FG 701 MOT 2 HSK 32 R Incl. Glujet 301 automatic adhesive application system Incl. printing unit DW701 MOT Incl. trimming unit KA702 pneumatic Incl. multifunctional package: Milling unit FR 701 Multi Corner copying unit FF701 MULTI Radius scraper ZK701 MULTI Incl. flush milling unit 1828 MOT 2 to 20 mm Incl. surface scraper FK 701 aggregate NT 701 Fgjlevymfzjn Ia Rhjb Incl. buffing unit Incl. spray device at the inlet and outlet New price in this configuration over 200T€ Location: Czech Republic Availability: Short term

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) Fgolswhuzxon Ia Rheb 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: used, lifting height: 35,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 1190603 Fsln Istr H Tcsa Rhjgb Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 19.640 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2014, operating hours: 1,454 h, axle configuration: 4x4, Equipment: all wheel drive, General information Field of application: Construction Serial number: 28/27010 Drivetrain Drive: Wheel Weights Empty weight: 14.323 kg Functional Mast: articulated arm Lifting capacity: 280 kg Working height: 2.800 cm Fsln Ia Retr Itmshsgb Other information Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 9.28x2.49x2.7 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2014, axle configuration: 4x4, Equipment: all wheel drive, General information Field of application: Construction Serial number: 28 27463 Drivetrain Type of fuel: LPG Drive: Wheel Weights Empty weight: 14.323 kg Functional Folnstr Iuyj Ia Rhsgb Mast: articulated arm Lifting capacity: 280 kg Working height: 2.800 cm Other information Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 9.28x2.49x2.7 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2015, General information Field of application: Construction Serial number: 15007 Weights Empty weight: 6.010 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Fgoln Ijtr Nr Doa Rheb Tyre brand: - Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2015, operating hours: 111 h, General information Field of application: Construction Serial number: 2031251 Weights Empty weight: 2.190 kg Functional Lifting capacity: 230 kg Working height: 1.000 cm Fgolnjvmwnae Ia Rhsb Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.31x0.81x2.18 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2014, operating hours: 1,290 h, General information Fjln Iaowckf Ao Rhsgb Field of application: Construction Serial number: GS6914-3407 Weights Empty weight: 4.082 kg Functional Lifting capacity: 454 kg Working height: 1.190 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 3.76x1.75x2.59 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information