Used Ciata E-230 for sale (14,234)

Condition: used, Functionality: fully functional, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,830 mm, free lift: 1,445 mm, fuel type: electric, mast type: triplex, construction height: 2,230 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 625Ah Sideshift, Dksb Hadeqxk Htogasl 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, safety light, LED,

Condition: good (used), Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning length: 1,000 mm, This EMCO E 200 cycle lathe is supplied with a collet chuck, three-jaw chuck and various tool holders. Dkjb Hjt R Rg Teadgajl

Condition: like new (used), mileage: 207,000 km, power: 205.94 kW (280.00 HP), first registration: 10/2019, overall weight: 16,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 8,750 kg, empty load weight: 7,260 kg, tire size: 285/70 R 19.5, fuel: diesel, wheelbase: 5,175 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,550 mm, loading space length: 7,300 mm, loading space height: 2,400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, spoiler, tail-lift, traction control, Iveco Eurocargo 160E28 2019 Automatic caisson mt 7.3 tailboard 15qli 200000km Dkob Hasuudivjdgasl

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, fuel type: electric, color: green, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPER NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A 2014 year of production The new roller brush combined with the new side brushes ensure an excellent sweeping effect A highly efficient dust collection turbine and new protective rubbers around the main brush prevent fine dust and dust from flying after sweeping. The machine has a large waste flap for collecting larger waste. The device has undergone a general, meticulous renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Dkeb Hjtyvd Readgaol Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter area (m²): 3.3 Dimensions length x width x height (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready for operation (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A New roller brush New side brushes New roller protective rubbers Garbage tanks 85l THE MOST IMPORTANT FEATURES: The ergonomically designed cockpit and the centrally located operator's seat ensure good visibility of the surface being cleaned The IPC GANSOW 1250 E sweeper is the perfect machine for effective, economical sweeping of multi-storey parking lots, warehouses, production buildings and outdoor spaces. Battery power ensures high flexibility, enabling work also in closed places, buildings and warehouses The large working width (1200mm) ensures high area efficiency Very clear and intuitive control panel.

Year of construction: 2021, Condition: like new (used), Functionality: fully functional, total length: 3,300 mm, total width: 970 mm, total height: 1,700 mm, input voltage: 230 V, type of input current: AC, This used machine, built in 2021, is the model UA1850 E ADWS wrapping and cut-off machine. It combines the economy rewinder with a working width of 1850 mm with a professional cut-off system with a working width of 1950 mm, which also meets the highest demands for precision and efficiency. All NEPATA demo and used machines undergo a comprehensive service. Before delivery of the used machines, a complete inspection and maintenance is carried out to ensure flawless operation and unrestricted use by our customers. In addition to the check-up, wearing parts such as silicone clamping elements and cross-cutting blades are replaced. The used machine is from 2021 and therefore like new and has a full warranty. Dob Hasuhv S Iedgaekl Please also watch our Youtube video - please note that this used machine does not have the peripherals presented in the video! On request, we will of course be happy to offer you the freight for this machine for an additional charge. If you have any questions, please do not hesitate to contact me and I look forward to hearing from you.

Condition: as good as new (ex-display), Year of construction: 2021, Cooling capacity: 26, 164, 230 kW Year of production: 2021 Country: manufactured in Italy Airflow: 5,000/40,000/50,000 m³/h Dimensions: 920 x 1120 x 720 mm/2120 x 2620 x 1920 mm/2270 x 3170 x 2040 mm Condition: very good, new Dkebsqrpihs Hadgaol Quantity of product: 4 pcs. Working temperatures of the AHU: -40/+70 °C Clivet AQX10, 26 kW (Year of manufacture – 2021), quantity 1 pcs. – 920 x 1120 x 720 mm, Airflow(2.5 m/s) – 5 000 m³/h Clivet AQX25, 164 kW (Year of manufacture – 2021), quantity 1 pcs. – 2120 x 2620 x 1920 mm, Airflow(2.5 m/s) – 40 000 m³/h Clivet AQX27, 230 kW (Year of manufacture – 2021), quantity 1 pcs. – 2270 x 3170 x 2040 mm, Airflow(2.5 m/s) – 50 000 m³/h

Condition: used, Functionality: fully functional, Year of construction: 2009, operating hours: 8,141 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 48V Battery Ah: 625Ah Battery year of construction: 2009 Description: Side shift Sideshift, Dksb Hadgsup Iyheasl 3rd valve, front working lights, load protection grille, full free lift,

Condition: like new (used), mileage: 56,000 km, power: 132.39 kW (180.00 HP), fuel type: diesel, wheelbase: 3,450 mm, loading space length: 3,770 mm, loading space width: 2,160 mm, loading space height: 2,180 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, fog lights, immobilizer system, onboard computer, spoiler, IVECO DAILY " PATENTE C " MODEL 60C18 " CENTINA E TARPA " ENGINE 3,000cc 180cv YEAR 2021 WITH 56,000 Km CERTIFIED.... SINGLE OWNER... WHEELBASE 3,450 PAYLOAD 2,700 Kg EXTERNAL DIMENSIONS OF THE BODY: LENGTH: 3.87 Mt WIDTH: 2.23 Mt INTERNAL DIMENSIONS OF THE BODY: LENGTH: 3.77 Mt WIDTH: 2.16 Mt Djbjvrq Ano Hadgaokl HEIGHT: 2.18 Mt FOR FURTHER INFORMATION DO NOT HESITATE TO CONTACT US... POSSIBILITY OF FINANCING WITH CONCESSIONAL RATES... EXCHANGES ARE EVALUATED...

Condition: used, mileage: 59,000 km, power: 103 kW (140.04 HP), fuel type: diesel, axle configuration: 2 axles, first registration: 06/2021, loading space length: 3,550 mm, emission class: euro6, color: white, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, onboard computer, USED GUARANTEED!!!Contacts: For more information call: 3441197960 - 030933077 Dksb Hadgon E Rbloaol Franco / Nicola Also follow us on Facebook and Instagram. Specifications: MAGNIFICENT IVECO DAILY 35S14 LH2 Accessories provided: ABS, Power windows, Car radio, Boardcomputer, Central locking, Automatic bi-zone climate control, Traction control, Cruise control, ESP, Particulate filter, Electronic immobiliser, MP3, Power steering, Steering wheel controls. Rossini Service: Established in 1960 as a FIAT / OM workshop, Rossini Service has been an ISO-certified IVECO authorized workshop since 1992. Our qualified and specialized staff has decades of experience in repairing and tuning cars and industrial vehicles of any manufacturer. Every Rossini Service vehicle is carefully checked and tuned up before delivery.

Condition: good (used), Year of construction: 2007, fuel type: electric, 20 pcs. E - Tow tractor Jungheinrich EZS 130 year 2007 + order picking trolley Used goods in very good condition, see pictures. Info tractor: Towing capacity approx. 3000 kg Tare weight approx. 525 kg (incl. battery) Very narrow design with a width of approx. 600 mm Height approx. 1350 mm Length approx. 1350 mm Wheelbase approx. 930 mm Turning radius approx. 1126 mm 24 V three-phase motor Year of construction 2007 Info order picking trolley: Length: approx. 2500 mm Width: approx. 630 mm Height: approx. 2000 mm stands on 6 wheels Negotiation price: € 1.900,-- net ex stock Dksb Hadsr Eyy Ssgaol Transportation possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: new, Year of construction: 2024, overall weight: 260 kg, fuel type: diesel, tank capacity: 34 l, color: black, output current: 65 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 12 kW (16.32 HP), continuous power: 10 kW (13.60 HP), total length: 930 mm, total width: 660 mm, total height: 900 mm, motor speed: 3,000 rpm, type of cooling: water, Model Proton 12000 230V is a single-phase generator with a maximum power of 12kW. This aggregate is equipped with a cooler thanks to which we increase its continuous operation time up to 24 hours. The aggregate has a built-in AVR regulator. ABBREVIATION: Genset type: Single-phase Liquid-cooled: Yes Fuel type: Diesel Voltage: 230V Rated power: 230V - 10,000 watts (12.5kVA) Maximum power up to 15 minutes - 12,000 watts (15 kVA) WEIGHT: Gross weight: 260 kg FUELING: 2.2 liters per hour (at 70% of maximum power) 1.8 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 2V8-W Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 2 Direct injection - Yes Type of cooling - Liquid (The unit has a radiator) Displacement - 998 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 24 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure sensor - Yes Oil condition sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 1100W Oil sump capacity - 2.5l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 220-CAVR-D Rated current (230V) - 65 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 85dB (measurement - 5m, open space) Fuel tank capacity - 34 liters Operating time on a full tank (Average) - 12 hours SOCKETS: Number of three-phase outlets - none Number of single-phase sockets - 1 piece (32A), 1 piece (16A) Number of other outlets - none DIMENSIONS: Diameter of wheels - 10 cm Width - 66 cm Length - 93 cm Height - 90 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - No Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC39 (for 230V) Hour meter - Yes Battery - 45 Ah TRANSPORT KIT: Yes - Small wheels Yes - Handrails on two sides Yes - Swivel wheels Yes - Wheels with mechanical lock RICH EQUIPMENT See below what else the kit includes: - Battery - Air filter - Oil filter - Fuel filter - Keys for current service - Plugs Dob Hetq Hggeadgajkl Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: ready for operation (used), 03. gang saw Pini and Kay VU 65 HH e with splitting wedge with drive motor 45 kW with countershaft with saw blades with saw clamp with hook with templates Dob Hadgeh Ict Esaskl with blower Location: Austria, near Steyr

Condition: used, mileage: 185,000 km, power: 207 kW (281.44 HP), first registration: 08/2018, overall weight: 14,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, operation weight: 14,000 kg, maximum load weight: 7,000 kg, empty load weight: 7,000 kg, tire size: 285/70 r 19,5, next inspection (TÜV): 12/2023, wheelbase: 4,815 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 7,200 mm, loading space height: 2,400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, low noise, navigation system, onboard computer, spoiler, tail-lift, traction control, trailer coupling, iveco eurocargo 140e28 P complete with rib and tail lift 15 q.li Dkjb Hsqxdcwoadgaol

Year of construction: 1989, Condition: used, control: Heidenhain TNC 355 Dobehd Rm Uj Hadgaekl table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min

Condition: used, Year of construction: 2009, Functionality: fully functional, Diosna SP 160 E kneaders are suitable for all types of dough. We offer a fully functional mixing set: 2 pcs DIOSNA SP 160 E kneader including mobile mechanism and trolley, trolley switch for downstream production (dough divider). All complete original DIOSNA. There is one central electrical switchboard for the whole unit. Year of production 2009. Ideal equipment for large-scale operation. Non-stop automatic dough kneading process with transport of dough further to production. Safety grill is included. The equipment is available immediately. After kneading, the dough is released from the SP 160 E kneader from the bottom of the bowl. Advantages: Large capacity Display with recipe creation Bowl scraper with temperature sensor Deb Hadgeuykd Ssaekl Technical details SP 160 E Dough capacity: 160 kg Flour capacity: 100 kg Hopper capacity: 260 l Hole diameter: 84 cm For more information, please contact us!

Condition: new, Year of construction: 2022, Functionality: fully functional, machine/vehicle number: AB00026437, Easy to use and with everything needed to fully edgeband a panel, olimpic k 230 evo is the right answer for the company that wants professional-level edgebanding. Now a new model is available with a rounding unit that enables, with a low investment, uncompromising panel processing. Debsuui Nus Hadgajkl

Condition: used, Special lathe for iron Dob Haordmm Dsdgajkl

Condition: excellent (used), Year of construction: 2014, Automatic double head saw ELUMATEC DG 244 + E 355 YEAR 2014 The proven elumatec "Cut from below" principle: This ensures free access to the support tables The large diameter of the saw blade and its optimal use guarantee the right cutting performance in all cutting variants Djb Hjm H Udbeadgaekl For elumatec, it goes without saying: the ability to cut to the outside dimension in all angle settings. This eliminates the need to carry out different length calculations for profiles of different heights. A huge advantage for special angles The universal pivoting and tilting of the saw unit allows you to cut tall and wide profiles and make all types of cuts that require a two-plane tilt. Thanks to this, many profiles can be cut without the use of supports Protective covers Serially equipped with saw blades Dosing spray devic

Condition: new, Year of construction: 2024, Functionality: fully functional, input voltage: 220 V, laser power: 5 W, working range: 110 mm, overall weight: 60 kg, height adjustment type: electric, laser wavelength: 355 nm, ambient temperature (min.): -20 °C, ambient temperature (max.): -50 °C, Equipment: cabin, DPSS LASER - Ultraviolet - Laser - UV Laser The 3W 5W UV engraving laser system is a high-quality device designed specifically for engraving and selling different materials. Thanks to the integrated air cooling system, no additional cooling devices are required, which considerably simplifies system maintenance. An outstanding feature of this system is its ability to engrave a wide range of materials. Whether metal, plastic, glass, wood or other materials - the UV engraving laser system produces precise and detailed engravings. With an output of 3W or 5W, the system provides sufficient power for a variety of applications. It is suitable for use in small workshops or studios as well as for professional use in larger production environments. The user-friendly operation enables even users without in-depth prior knowledge to use the system effectively. In addition, the engraving laser system offers numerous setting options to achieve the desired engraving results. Dkeb Hajum Su Rsdgaol In summary, the 3W 5W UV engraving laser system is an excellent choice for sales. The combination of high performance, versatility and ease of use makes it a valuable investment for businesses and creatives looking to achieve high-quality engravings on a variety of materials. UV engraving laser, laser engraving machine, engraving in all materials, UV laser, DPSS laser, engraving in glass, engraving in plastic, ultra-fine engraving.

Condition: new, Year of construction: 2022, Functionality: fully functional, power: 2 kW (2.72 HP), overall weight: 22 kg, total length: 500 mm, total width: 280 mm, total height: 450 mm, Generator (električni agregat) nemškega proizvajalca "Metallwarenfabrik" Tip: GEKO Supersilent 2022 E-P/YHBA SS Inverterski generator GEKO 2022 E-P/YHBA SS Dkjb Hjunh Iceadgasl

Condition: reconditioned (used), warranty duration: 6 months, Siemens Simodrive E/R-Module 6SN1145-1BA02-0CA1 Deb Hetuwi Eoadgaokl IEMENS SIMODRIVE 611 INFEED/REGEN.FEEDBACK MODULE 36/47 KW, CLOSED-LOOP CONTROL, WITH INTERNAL COOLING, MAINS CONTACTOR WITH BREAK CONTACT

Condition: good (used), Year of construction: 2012, Functionality: fully functional, cooling capacity: 83 kW (112.85 HP), type of cooling: air, overall weight: 800 kg, total width: 1,300 mm, total length: 3,100 mm, total height: 1,800 mm, warranty duration: 6 months, Aircooled chiller Aermec NRL0350 E 01 83kW Cooling capacity: 83 kW / 23,6 tons (12/7 — 35°C) Year of manufacture: 2012 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SH184A4ALC (scroll) Type of refrigerant: R410-А Dobsvkd Dce Hadgaokl Number of fans: 8 pcs. Hydraulic module: 1 pcs. water pump LOWARA CEA370/1V/C, expansion vessel, buffer tank 300l. Dimensions: 3.1x1.3x1.8 m Weight: 800 kg Working hours: 16685/16685 h. Condition: Good

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Dob Hadeuy H Nwsgaskl Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: reconditioned (used), The largest selection of weighing and labeling equipment Bizerba . Machines are after general overhaul. We give a guarantee on the machines. Dkob Hohtfr Djadgasl

Condition: new, Year of construction: 2024, Functionality: fully functional, laser wavelength: 1,064 nm, Engraving laser / fiber laser of the FLS series Deb Hadgsum Sk Ssaskl Discover the endless possibilities of engraving and marking technology with our CE-compliant and enclosed FLS Series fiber laser! With an automatic door opening and closing system and standard rotation compatibility, this model offers unmatched performance and flexibility. Engrave metals, precious metals, plastics and leather in just seconds with our sophisticated galvanometer system that shows you the desired position through laser light indicators for fast and economical work. Our FLS series engraving laser/fiber laser has an optional power of 20-100W, a laser wavelength of 1064 nm and a repeatable precision of ± 0.003 mm. With a marking speed of up to 7000 mm/s and a minimum character of 0.2 mm, our laser is the perfect choice for demanding applications. Take advantage of our unbeatable offer from € 9500 net and let us convince you of the technology in person. Arrange your no-obligation appointment today and discover the future of engraving and marking technology. Fiber laser 20W | 30W | 50W or also available as MOPA fiber laser 20W | 30W | 60W | 100W We look forward to your inquiry! Your Laserstore team