Used All-Kor Akb S220 for sale (56,037)

Condition: good (used), total length: 120,000 mm, shelf height: 5,000 mm, 120 running meters of Galler pallet racking New & used goods in very good condition, see pictures. Height 5 m Depth 110 cm, galvanized Field load 12 tons Beam length 2.95 m yellow Beam with load / compartment 2550 kg Negotiated price: € 14.990,-- net ex stock Dksln Ssqwybvjx T Ssl Offer consists of: + 41 pre-assembled frames, depth 110 cm, height 5 m +240 beams, length 2.95 m, 2550 kg load/shelf +480 pcs. suspension locks + 82 concrete anchors Load plates, documents etc. are included as standard. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: used, Jaw width: 125 mm Doln Sx Teu Sh Hne Sskl Clamping width: 210 mm

Condition: reconditioned (used), Year of construction: 1983, Functionality: fully functional, Specification: Rated pressure 50 tons Slide stroke 7-80 mm Speed 75-300 strokes/min Slide adjustment 50 mm Table dimensions 500 x 500 mm Passage between columns 400 mm Weight 8500 kg Press equipped with mechanical jaw feeder - ELMEA PM132 - Year of production of the feeder: 2004. - For high speed and precision (0.02 mm) operation. - Speed up to 1000 strokes/minute for short feeds. - Acquires motion from the press shaft by driving a gear wheel with alignment joints. Rotary motion is converted to straight-alternative motion by a crank/crank system. - Adjustment of the feed length is achieved by an accurate step screw. - The clamp opening can be adjusted to accommodate belt thickness. It can also be set up for remote control operation. Dkoln Sx Tetq Hqas Sol - It has an emergency stop sensor for hooking into the tool and is equipped with a kinetic joint that reduces the feeding angle from 180 to 120 or 90 degrees, increasing speed during feeding. The press has been professionally refurbished by Service BTC Maszyny Stolarczyk - New touchscreen control panel and PILZ safety controller - New lubrication pump and hydraulic fuse - Warranty 6 months. - Location of the machine: 97-410 ZŁOBNICA, POLAND. - Ready for delivery.

Condition: used, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 20 Djljt U Itfon Sx T Sekl - double exit - Power 20kw - triod ITL12

Year of construction: 2018, Condition: as good as new (ex-display), Metals Minerals Sp. z o o. offers for sale the 3VST 2000 P / INSON ultrasonic cleaning machine for pressure moulds, core boxes, inserts and workpieces cleaning. Dksln Sjirfb Njx T Sel The 3VST 2000 / P- INSON unit consists of three tanks - cleaning, rinsing and passivation. The price of the unit includes: oil separator, drip tray, platform with steps, basket with shelves for cleaning small parts and accessories. The manufacturer of the unit is FISA ULTRSACHALL, the market leader in ultrasonic cleaning equipment for pressure and injection moulds, core boxes, inserts and workpieces. The unit can be viewed in Końskie after prior appointment.

Condition: used, Functionality: fully functional, Waters Alliance HT 2795/2790 Separations Modules. This Waters 2795 HPLC integrates a solvent management system and a sample management system to provide accurate analysis for HPLC, LC/MS or flow injection mass spectrometry applications. It is built for a variety of applications and are routinely used in analytical environments such as food safety, forensics, research and development, quality control, and chemical and pharmaceutical laboratories. Deljt Uwc Aen Sx T Sjkl Number of solvents: one to four Gradient profiles: 11 gradient curves Solvent conditioning: vacuum degas Maximum operating pressure: 5000 psi Compressibility compensation: automatic and continuous Sample plates: total of four plates Power requirements: 950 VA (Maximum) 2 for sale. 1 piece/2000 EUR. Good working condition. Please check out our other listings as well.

Condition: like new (used), total length: 40,000 mm, shelf height: 5,000 mm, 40 running meters of Galler pallet racking New & used goods in very good condition, see pictures. Height 5 m Depth 110 cm, galvanized Field load 12 tons Beam length 2.95 m yellow Beam with load / compartment 2550 kg Negotiated price: € 4.990,-- net ex stock Offer consists of: + 14 pre-assembled frames, depth 110 cm, height 5 m + 78 beams, length 2.95 m, 2550 kg load per compartment Djlnoqwx U Te Sx T Sjkl +159 pcs. suspension locks + 56 concrete anchors Load plates, documents etc. are included as standard. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: good (used), Year of construction: 2018, cooling capacity: 19.7 kW (26.78 HP), type of cooling: air, overall weight: 316 kg, total width: 700 mm, total length: 1,600 mm, total height: 1,400 mm, warranty duration: 6 months, AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Dksln Ssufr Igjx T Ssl Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Good

Condition: new, Year of construction: 2025, Functionality: fully functional, Product introduction T series of pallet wrapping machine used in container transportation and bulk, pallet packing of the goods widely used in glass products, hardware tools, electronic appliances, papermaking, ceramics, chemical industry, food, beverages, building materials, etc. To improve logistics efficiency, reduce the loss in the process of transportation, has the advantages of dustproof, moisture, reduce the packaging cost. It is the ideal choice of the upgrade the product packaging. Feature advantage  Human machine interface control, easy to operate.  AC motor, adjust tensile and film feeding speed by transducer control.  The safety film carriage door, easy to assemble the film, the machine can’t run when the door is open. Keep safety during operation.  Durable using, our wrapping machines can be used for super 10 years which is approved by most of our customers. Easy handling, we improve the machine according to 16 years experience to make it more human friendly, safe and easy operation. Machine weight 750kg Machine power 1.5Kw Supply voltage 120V/60HZ, 1 Phase Turntable speed 3~12rpm Wrapping material LLDPE Stretch Film Thickness 17~35μm Width 500mm( can be customized) Inner center of film roll 76.2mm Max. film roll diameter 250mm Main function Control System PLC programmable control Human machine interface, the winding layers and the frequency can be set Photoelectric switch, automatic sensing the height of the goods Doln Ssvcybnox T Sjkl Function of reinforce the winding, supply special protection for certain part Over top time can be set Turntable driving 3~ 12 rpm variable frequency speed is adjustable Turntable driving is chain transmission, precise positioning Turntable bottom with forklift slots Film frame system Film frame is power pre-stretch structure, pre-stretching can be up to 250%. Double chain structure, steady and reliable AC motor drawing film, the inverter adjust tension Lifting and down speed of frame film, and film feeding speed can be adjustable The top and bottom coil number can be controlled separately Human machine interface control Digital parameter setting Turntable rotation speed, film frame up-down rate, output film speed of the film frame(0-50 can be set) Main function Control System PLC programmable control Human machine interface, the winding layers and the frequency can be set Photoelectric switch, automatic sensing the height of the goods Function of reinforce the winding, supply special protection for certain part Over top time can be set Turntable driving 3~ 12 rpm variable frequency speed is adjustable Turntable driving is chain transmission, precise positioning Turntable bottom with forklift slots Film frame system Film frame is power pre-stretch structure, pre-stretching can be up to 250%. Double chain structure, steady and reliable AC motor drawing film, the inverter adjust tension Lifting and down speed of frame film, and film feeding speed can be adjustable The top and bottom coil number can be controlled separately Human machine interface control Digital parameter setting Turntable rotation speed, film frame up-down rate, output film speed of the film frame(0-50 can be set)

Year of construction: 1999, Condition: used, machine/vehicle number: 1449, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 30KW - double exit Djlnet U Ia Ej Sx T Sskl - complete with triode ITL2 - sn 1449 - year 1999

Condition: used, Functionality: fully functional, Pall Stax SXLSC02 Lab Scale Chassis. Operating Pressure: 3.5 bar Operating Temp: 60C Dkoln Sx Tst U Shge Ssl Good working condition. Please check out our other listings as well.

Condition: like new (used), Sorvall TV-865 Rotor · Capacity: 48 ml · Number of tubes: 8 x 6 ml · Max Speed: 65,000RPM · Max g: 400,671 · k Factor: 10.1 Good working condition. Please check out our other listings as well. Dkjlehg Um Eon Sx T Sel

Condition: like new (used), Sorvall SM-24/ SS-34/ SA-600/ SLA-1500/ HB-6 rotors available. For exact pricing please inquire. Dsln Sx Tsh E Di Is Sjkl

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Dkjln Sx Tjwcrrde Sjl Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: used, mileage: 104,000 km, Year of construction: 2019, Serial number: WMA08VUZ7K900xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20060 Specifications: Mileage: Approx. 104,000 km (can increase) Transmission: Automatic Engine brake Dolnov U S Ide Sx T Sjkl Euro 6 Loading: 8 Pallets Zepro lifting element (750 kg) with remote control Drivetrain: 4x2 Side opening: Sided r Seats: 3 seats Power: 140 hp Comfort: Radio/CD, climate/AC Ready for delivery Description: MAN 8 pallet box truck from 2019, has done approx. 104,000 km (may increase), and has new EU approval now. The truck is ready for delivery. Km: 104000 HK: 140 Technical approved: Yes EU-approved until: 28.03.2027 Own weight: 2720 Total Weight: 3500 Payload: 705 Width: 220 Length: 703,5 Euro: 6 Gearbox: Automatic

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 30,977 mm Number of bays per rack row: 11 Number of levels plus floor level: 3 Technical data for volume: Pallet spaces per bay: 12 Number of pallet spaces per row: 132 Total number of pallet spaces: 132 Based on: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Scope of delivery includes: 12x pallet rack uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 6,000 mm Depth: 1,100 mm 66x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA 116x40 SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 132x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 48x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Deln Sswh R Egox T Sekl 24x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, all stainless steel loading : 50 to 55% 3,7 kW with vacuum pump Dkelowhlqden Sx T Sjl with filters dimensions (L x W x H): ± 2.300 x 1.700 x 1.800 mm

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 04/2017, emission class: euro6, color: green, number of seats: 3, Year of construction: 2017, total length: 5,926 mm, total width: 1,993 mm, total height: 2,780 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Quickly & easily contact our sales consultant Internal ID number: [ 2573 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * German vehicle * 2nd owner * Regularly serviced * Euro 6 standard * Accident-free * High roof + long wheelbase * 4x4 all-wheel drive * Raised vehicle * Automatic transmission * rre * Auxiliary heating * Cruise control * Lane keeping assist * Blind spot assist * Trailer hitch * Automatic climate control * Bluetooth multimedia function * Multifunction steering wheel * and much more... * Special features: Storage in the driver's cab roof lining, passenger side airbag, hill start assist, 13-pin trailer socket, equipment package: Cabin Comfort, equipment package: Driver Comfort, exterior mirrors without integrated indicators, outside temperature display, front side indicators, ceiling light in the cargo area, driver assistance system: collision warning system with braking function (Collision Prevention Assist), windows for rear doors / tailgate with wiper / washer system, 180 A generator, heated rear window, fuel tank: main tank 100 Ltr., cargo area partition with window, cross member with integrated step, inside rear view mirror, seats in the driver's cab: double passenger seat, seats in the driver's cab: double passenger seat with folding backrests, seats in the driver's cab: heated passenger seat, lane package, rear stabilizer, reinforced front stabilizer, fuel level sender for additional heating, heat-insulating glazing (windscreen with band filter above)Other equipment: 3rd brake light, adaptive brake light, driver's side airbag, washer fluid level indicator, electric exterior mirrors. Adjustable and heated, both exterior mirrors with integrated turn signals, brake assist, braking system with ABS+ASR, roof lining in the driver's cab, lockable glove compartment, rear door (opening angle 180 degrees), body/structure: high-capacity box, child safety lock, load anchors/lashing eyes, headlight range control, model update, 2.1 liter - 120 kW CDI CAT engine, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 emissions standard, sliding door for the cargo/passenger compartment on the right, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, maintenance interval display Assyst, permissible gross vehicle weight 3.50 t ---- Looking for leasing or financing? We offer attractive offers – even without a down payment! Feel free to contact us. Deln Sxowh H N Ie T Sokl Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: used, Year of construction: 2023, General information Field of application: Construction Serial number: Weights Empty weight: 174 kg Functional Mast: articulated arm Lifting capacity: 350 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Doln Sx Tstr Ilxe Sokl Transport dimensions (LxWxH): 0x0x1.87 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2000, Overview  This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Technical data  Capacity: From 9,000 bph to 12,000 bph Formats: 75 cl glass bottles Application: Cork caps for cider bottles Scope of Delivery BERTOLASO DELTA 512 S solo capper Djlnjwhwvlj Sx T Sjkl

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Djln Sxjvn Tg Ij T Sokl Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 2 Technical data for volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 45 Total number of pallet spaces: 45 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, Footplates Dkelowh Nqusn Sx T Ssl The uprights are pre-assembled (screwed framework) Height: 3,000 mm Depth: 1,100 mm 20x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA 116x40 SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 40x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf uprights that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Dslneu R S Hpe Sx T Sskl Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm Dkjljvbgtnen Sx T Sol ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Dslsth R Tlsn Sx T Sekl Size for transport: 320x110x145 cm Stock no: 2002056