Used Nilfisk-Alto Neptune 4-55 Fa for sale (82,200)

Condition: good (used), Polar Mohr LW 1000-4-EV paper stack lift Device in perfect technical and visual condition. This is the currently produced model. Hydraulic drive. Djb Evjwdrqcoi Tnjut 380V power supply Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity 1000kg. Front plate for easy positioning of the material stack. Pallet dimensions 1200×800

Condition: reconditioned (used), Year of construction: 2017, Functionality: fully functional, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 149 kg, warranty duration: 6 months, temperature: 150 °C, HOT WATER WASHER NILFISK MH 4M -210/100 PAX 2017 year of production The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 210 bar and up to 940 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 940 Pressure working [bar]: 210 Max. heating temperature [°C]: 85-150 Dsb Eewhwmwevi Tnsut Connection power [kW]: 8 Cleaning agent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 149 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2020, Working width: 630 mm Deb Eviewctgvs Tneut Working height max: 300 mm Number of knives: 2 Working height min: 3 mm Rotation speed: 4.700 rpm Table length: 1.570 mm Number of feed-out rollers: 2 Main motor power: 15 kW Feedrate max: 20 m/min Continuously variable feed: Yes Digital readout for thickness: Yes Segmented pressure bar: Yes Electromotoric height adjustment: Yes, with digital readout Cutter block: Spiral cutter block Spiral cutter block: Reversible cutters Outfeed: Rubber roller FELDER Silent-POWER: Yes Control: FORMAT 4 POWER-DRIVE Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 985 kg Space requirement Length: 1,9 m Space requirement Width: 1,2 m Space requirement Height: 1,9 m

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Dujbotq Nlrs Evi Tnst Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: excellent (used), Year of construction: 2017, WEISHAUPT WM-G10/A-4; With gas train -Power: 110-1250 kW - Year of manufacture: 2017 - Version: ZM Dob Eviewgym Ds Tnsut

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Dob Evi Tsg Ngmxsneut

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet, all holders with c6 have been removed, no longer available pallet 5 (photo 1 to 4) euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 (photo 5 to 8) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 (photo 9 to 12) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 (photo 13 to 16) euro 2730 total 3x driven tools vdi 40 euro 580/pc Duob Evi Tjvry T Nsnot 11x tool holder vdi 40 euro 90/pc

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, overall weight: 1,300 kg, filling opening length: 1,300 mm, filling opening width: 1,400 mm, Technical specifications: Funnel opening: length x width 1300 x 1400 mm Cutter opening: length x width 700 x 760 mm Number of shafts: 4 of which: 2 cutting shafts Number of cutting discs: 37 Number of clearing discs: 37 Shaft speed: 25 rpm Duebowf H Hbe Evi Tnet Drive power: 2 x 11 kW

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Deb Eop U Umksvi Tneut

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Dobsrdkf Ae Evi Tnout Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: ready for operation (used), Functionality: fully functional, 4 printing units 12 " water cooling unit 2 perforated units It is in good condition Dobswhqnzs Evi Tnsut in production

Condition: as good as new (ex-display), Product information Nilfisk T30 industrial vacuum cleaner Economical three-phase industrial vacuum cleaner INCLUDES: NILFISK T30S VACUUM CLEANER FREE: Vacuum cleaner hose Nilfisk T30 industrial vacuum cleaner – Like new! Selling a Nilfisk T30 industrial vacuum cleaner in like-new condition – barely used and perfect for professional use in workshops, construction sites, or industrial facilities. Product Details: Model: Nilfisk T30 Condition: As good as new, barely used Capacity: 30 liters – ideal for larger cleaning tasks Performance: Powerful suction power for demanding applications Motor: Robust and durable industrial motor Mobility: Compact design with stable casters for easy handling and transport Noise Level: Quiet operation for comfortable operation Energy Efficiency: Low power consumption with high performance Filtration: Efficient filtration for clean air and optimal vacuuming performance Versatile Applications: Ideal for workshops, construction sites, production halls, and industrial environments Reliably vacuums fine dust, dirt, and liquids Djb Evi Tswbiycsneut Perfect for quickly and thoroughly vacuuming up dirt Highlights: Robust: Withstands intensive use User-friendly: Easy to operate and maintain Flexible: Suitable for various types of dirt (dust, dirt, Liquids) Areas of application: Workshops Construction sites Production facilities Industrial environments

Condition: new, Year of construction: 2025, You can call us 24/7 for vibrating screen system for sale Our vibrating screen systems make your production processes more efficient by combining high performance and durability. Our CVS-1240, CVS-1640, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 and CVS-2470 models offer options suitable for your needs with different layer numbers and sizes. Each model provides maximum efficiency with the number of layers ranging from 2 to 4 and large production capacities. Our vibrating screen systems meet all your production needs with production capacities ranging from 70 t/h to 336 t/h. For example, our CVS-1240 model has a production capacity of 70 - 95 t/h with its 1,200 x 4,000 mm layers and operates with only 7.5 kW motor power. Our other models draw attention with their higher capacities and different motor powers. Especially our CVS-2470 model can produce up to 336 t/h with its 2.400 x 7.000 mm layers and double motor power. Dppwiv Dusb Ejuf D Hbsvi Tnst Each of our vibrating screen systems offers you a long-lasting use with their durable structures and high capacities. With weights from 7,400 kg to 24,000 kg, they are robust and reliable. It allows you to increase your production capacity while reducing your costs with both high efficiency and low energy consumption. Our vibrating screen systems have the capacity to screen all kinds of materials quickly and effectively. They are designed to optimise your production processes, increase productivity and reduce costs. Each model offers flexible solutions with various layer options and production capacities. It operates smoothly for many years with its high quality and reliable performance. Our products offer you the best results by combining superior engineering and innovative design. Make a difference in your production processes with our vibrating screen systems.

Condition: ready for operation (used), Year of construction: 1990, Lafis LEH 55 electric pallet truck Deb Eviergrage Tnjut Model LEH 55 P Load capacity 5500 kg Year of construction 1990 Fork / stage 2500 mm x 1000 mm Motor 290W Hydraulics 2000 W Battery 24 V With battery and charger Lifting height: 200 mm Battery pack Banner PSS 320 built in 2015

Condition: used, operating hours: 5,747 h, mileage: 5,747 km, power: 38 kW (51.67 HP), first registration: 10/2011, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,055 kg, empty load weight: 2,445 kg, wheelbase: 2,050 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: none, number of seats: 2, Equipment: additional headlights, air conditioning, all wheel drive, cabin, parking sensors, * German vehicle * Condition see photos * Only 5,747 operating hours * Complete winter service equipment including snow blade & salt spreader * Complete sweeper equipment including 2 brush systems & sweepings container * Salt spreader from Sicometal, type SAL 0.8m3 Jungo * Nominal capacity 0.8m3 * Snow blade from matev * Working width 1,300 mm * JUNGOJET 3500 sweeper * The driving speed of the sweeper and suction unit is 38 km/h and the maximum sweeping speed is 20 km/h (depending on working conditions) * Large capacity hopper: gross volume: 1.4 m³ * Stainless steel hopper * 250 l fresh water tank + additional 300 l recycled water in the hopper * Sweeping width: 1.3 to 2.4 m with 2 brushes * Individually adjustable front brushes that can be retracted and extended separately * 750 mm wide suction mouth in front of the front axle (on four 4 castors) * Direct view of the suction mouth through a window in the cab floor * Maneuverability due to articulated steering, turning radius of only 1.9 meters * 1,900 mm vehicle height makes it suitable for use in parking garages and slim 1,130 mm width on sidewalks * 4 wheel drive * Front lift * Comfort cab with air conditioning * Comfort seat on driver's side * 2 seats * Reversing camera * Working lights * Rotating beacon * Wheelbase 2,050 mm * GVW 3,500 kg * Unladen weight 2,445 kg * Payload 1,055 kg * Self-propelled work machine, street cleaner, therefore free movement in all environmental zones * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Dueb Evjwc Afzei Tnot You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Duebod Tqale Evi Tnjt - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 131 kg, warranty duration: 6 months, HOT WATER PRESSURE WASHER NILFISK 5M-180/800 The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle Fully electric water heating allows work in places where exhaust gas production is not allowed. Brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 800 l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see Dueb Eviev N Hqve Tnjt TECHNICAL DATA: Supply voltage [V]: 400 ~3 phases Pressing capacity [l / h]: 740 Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power consumption [kW]: 24 Engine power consumption [kW]: 5 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 131 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Djb Evjv A Rq Tei Tnsut Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: new, Functionality: fully functional, Year of construction: 2025, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Vacuum sweeper Condition: New machine Technical condition: New Battery Volt: 24V Battery Ah: 240Ah Battery type: Gel Battery year of manufacture: 2024 Battery condition: 80 - 100% Description: New device with 12 months warranty Dujb Everqqv Hji Tnjt

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Dujb Evi Tjfdkb Tsnst Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Dueb Evefdkb Uoi Tnjt - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Djb Evofdkbhei Tnsut - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Dujb Evod Tbbdoi Tnjt - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Doboguk Dks Evi Tnjut Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Dobeguk Dvj Evi Tneut - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.