Used Hurlimann H-1500 Sx for sale (29,861)

Condition: used, Workbench, work table, assembly bench Fgslq Ncefdg Iho Eqeb -with: bench vice -Width: 1500 mm -Depth: 730 mm -Height without vice: 920 mm -Jaws: 115 x 20 mm -Span width: 160 mm -Thick worktop: 40 mm -Drawer: 1 -Weight: 85 kg

Year of construction: 1998, Condition: ready for operation (used), Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler. Fgolehw N D Isq Nc Eqsb

Condition: used, Year of construction: 2017, operating hours: 12,595 h, load capacity: 2,000 kg, lifting height: 6,865 mm, free lift: 2,305 mm, mast type: triplex, construction height: 2,860 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Superelastic Front tires size: 200/50-10 Rear tires Type: Superelastic Felq Nc Eju D Tbnjqogb Rear tires size: 16x6-8 Battery Volt: 48V Battery Ah: 775Ah Battery manufacturer: Still Battery type: PzS Battery year of construction: 2017 Description: Incl. charger Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Full free lift, Safety light, Joystick, Rotating beacon, Single pedal, Seat,

Condition: ready for operation (used), Indramat 2AD160C-B350A2-BS03-B2V2 Motor - 236 NM / 1500/6000UPM - 37 / 53KW,used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fjlq Ncet Adpfe Eqsgb

Condition: excellent (used), Year of construction: 2014, operating hours: 63 h, Functionality: fully functional, fuel type: electric, operation weight: 346 kg, fuel: electricity, IPC GANSOW 1010E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see Fjlqov Aa Afs Nc Eqegb TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush NEW side brushes NEW roller rubber guards 65l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for effective, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit Foljl Nbqcsq Nc Eqogb - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Clamping plate, welding table, welding table, straightening plate Folsft Tcisq Nc Eqogb -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Year of construction: 2000, Condition: ready for operation (used), X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible. Felq Njqv Et Ijc Eqsgb

Condition: used, Year of construction: 2017, operating hours: 9,756 h, load capacity: 2,000 kg, lifting height: 6,865 mm, free lift: 2,380 mm, mast type: triplex, construction height: 2,860 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Superelastic Front tires size: 200/50-10 Rear tires Type: Superelastic Rear tires size: 16x6-8 Fgolsu D Tbheq Nc Eqeb Battery Volt: 48V Battery Ah: 775Ah Battery Manufacturer: GBD Battery type: PzS Battery year of construction: 2017 Description: Incl. charger Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, full free lift, safety light, joystick, single pedal, seat,

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Fgslq Ncsq Nx E Se Eqsb After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Year of construction: 2024, Condition: new, Functionality: fully functional, 1 new Vollmer guide rail, complete Guide rail lifting roller bearing guide rail prismatic guide rails stroke adjusting spindle with adjusting wheel Fgjlopn T H Isq Nc Eqeb

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Folqslzm Eqe Nc Eqegb Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg Fgjlq Nob Hzggoc Eqeb

Condition: good (used), Cutting capacity in ST 60 M 10 - M 42 --- Motor power 4 kW ,,, Speeds 35 - 185 rpm ,,, Quill stroke 120 mm ,,, throat depth 300 mm ,,, Machine height 2.3 m Weight 1.2 tons Cartridges for metric threads Fgolqjunrb Hj Nc Eqob optional Cartridges for inch threads--- ...

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Fsloh Rdwxeq Nc Eqjgb Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, operating hours: 3,596 h, mileage: 73,289 km, power: 78 kW (106.05 HP), first registration: 09/2008, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 2,180 kg, empty load weight: 2 kg, wheelbase: 2,450 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, power assisted steering, * German vehicle * Condition, see photos * original ONLY 73,289 km * ONLY 3,594 operating hours * Structure from premium manufacturer TRILETY, type MCK * Dirt collection unit at the rear, consisting of 2 disc brushes, each 900 mm Ø, as well as suction mouth and suction channel with wear protection coating, sweeping width approx. 2000 mm * Hydraulically driven high-performance suction fan, suction capacity approx. 11,000 m³/h, negative pressure in the container max. 1,100 mm/WS * Dirt container made of stainless steel (DIN 1.4301) with a volume of approx. 2.3 m³, 2 observation flaps (left and right). High-tip emptying with an emptying height of approx. 1,400 mm. Separate fresh water tank (stainless steel DIN 1.4301) with approx. 400l * Control panel for controlling the sweeper in the driver's cab of the vehicle * Water spray system with electric pump 12V, solenoid valves and spray nozzles on the disc brush and in the suction mouth, connection for spray hose for machine cleaning * Leaf suction hose 130 or 150 mm Ø, 3 m long, with shock tube made of sheet steel and water spray nozzle, mounted on the tailgate * Front brush can be extended hydraulically to the right, pulled with disc brush 1,000 mm Ø, including hydraulic tilt adjustment from the driver's cab and contact pressure control on the brush unit * High-pressure water pump Additional, hydraulically driven high-pressure water pump for machine cleaning, 15 l/min at max. 150 bar, including hose reel with 10 m hose and washing lance with adjustable jet * Sweeping speed 2 - 15 km/h * Emptying height 1,450 mm * Tipping hydraulics Fslq Nevtnvhoc Eqogb * Change system for 3-way tipping body or holding frame for attachments * All-wheel drive * 5-speed manual transmission * Creep gear * ABS (anti-lock braking system) * Windscreen heating * Comfortable driver suspension seat * Driver's cab rear wall with window * Surface-mounted headlights * Rotating beacons * Wheelbase: 2,450 mm * GVW: 5,000 kg * Payload: 2,820 kg * Payload 2,180 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: excellent (used), Lowara SV 15Kw 2900obr/min, 39m3/h Vertical Pump. Fjlq Novgba Hoc Eqjgb

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Fgslq Nc Eegp T Eusqeb Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: used, Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys -Total length: 1500 mm -Total depth: 450 mm -Total height: 1530 mm -Arm length: 250 mm -Intermediate dimension: 26 mm Fjleb Uvtroq Nc Eqjgb -Number: 4x cars available -Price: per piece -Weight: 50 kg/piece

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Fgjlqjvt Tu Ne Nc Eqeb Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: not inspected (used), Söderhamns disc chipper with 2 inlets.6 knives. Sold "as is". Staid on the one place last 8 years- as on the pictures ,before it stayd 16 years in storehouse. Disc running fine by hand. Outlet closed. Was working on the belt transporter. Fgolq Ncsmdn Ers Eqjb Loading in price.

Condition: new, Year of construction: 2025, For sale is a new guillotine shear directly from the manufacturer Prod-Masz. Visit our website to see our other products. Guillotine shears manually 1500 / 1.5mm the working length: 1500mm to sheet steel up to 1.2mm, Weight: 400 kg We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery. Fgolq Necvqnyec Eqsb

Condition: new, Lifting capacity 1500 Kg Fgolevblgyoq Nc Eqob Magnetic field mm weight 0,045 t dimensions 0,44 x 0,22 x 0,25 m

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Fgslq Ncslhwr Ro Eqeb good condition

Condition: used, 240kg / batch Used and in working condition. We are also happy to offer refurbishment, transport, installation, and training. For additional photos, information, or to arrange a viewing appointment, feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roaster, Probat Fgjlq Ncovgg T Sj Eqjb