Used Hurlimann H-1350 Sx for sale (25,363)

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Folefu Itbjqz H S Djgb Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, LindnerWerk BS 220 H band sawmill for cutting logs up to 90cm wide in diameter with a 5m long table. The sawmill has a double-sided saw and cuts in both directions, making it much more efficient than traditional sawmills. The set includes feeding tables and sawdust extraction. The machine was working until the end, but it has been standing for approx. 1 year so a small service would be useful. 45kW main motor. Contact phone: 602 370 012 p. Jaroslaw. Fgslqek E Im Doz H S Dob

Year of construction: 2002, Condition: used, Functionality: fully functional, Horizontal machining center with double chain magazine. TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm control: Siemens Sinumerik 840D B - axis: 360 x 0,001 ° spindle speed - stepless: 8.000 rpm feed X/Y/Z/ axis: 1 - 60.000 mm/min feed B axis: 9.250 °/min rapid traverse X/Y/Z: 60.00 m/min feed force X/Z: 9.600 N Feed force Y: 8,000 N drive power 40 % ED: 20,00 KW driving power 100% ED: 13,00 kW Tool holder: SK40 Torque at 40% / 100% ED: 191 / 124 Nm Pallet size: 2x 400 x 500 mm workpiece weight: max. 600 kg Fgelqz Hsnh Rn Ae S Dob tool magazine: 180 tool diameter: 90 mm tool diameter with 2 free places: 160 mm tool length: max. 350 mm Tool weight: max. 3.50 / 12.00 kg MACHINE DETAILS total power requirement: 65,00 kW machine weight: approx. 16,00 t space requirement: approx. 9.00 x 4.50 x 3.50 m EQUIPMENT Coolant system with IKZ Double chain magazine with 180 places Chip conveyor BLUM tool laser measurement electronic handwheel

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 981140S11ZV40, Year of construction: 1998, operating hours: 15,000 h, fuel type: gas, lifting power: 4,000 kg/m, fuel: liquid petroleum gas (LPG), Equipment: additional headlights, cabin, front guard, lighting, 4TON forklift for gas installation with benzine engine. HYDRAULIC FORKLIFT. VERY GOOD CONDITION Fgolqotzzuisz H S Deb MILEAGE 15160 HOURS TRIPLEX WHEELS AND CHASSIS SERVICED

Condition: excellent (used), 2 pieces shooting head and one shooting head extension for a Roeper H12, very good condition, ready for immediate use Fgolqed Tx Azez H S Dsb

Condition: used, mileage: 14,613 km, power: 66 kW (89.73 HP), first registration: 07/1955, overall weight: 5,000 kg, fuel type: gasoline, axle configuration: 4x2, empty load weight: 3,275 kg, gearing type: mechanical, Year of construction: 1955, Equipment: truck registration, Ford FK 3500 V8 classic car Ford (USA)FK 3500 Truck closed box H-registration Vehicle documents !!! without engine without gearbox !!! 14613 kilometers according to previous owner (without V8 engine 3800ccm 66KW) kerb weight 3275Kg Felqz H Sjqxt Nfs Degb gross vehicle weight 5000Kg 3 seats LxWxH 5700mmx 2400mmx 2860mm On customer order You can find a video of this offer at s://youtube/watch?v=AmLH53EzXFg You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2000, Condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down Fgelqz Hoilqvrs S Djb - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: excellent (used), Height: approx. 2000-4500 mm Width: approx. 1130 mm useful depth: 1 x 1000 mm Stand load: up to 3000 kg arm load: up to 500 kg 6 storage levels incl. floor single-sided design screwed foot profiles made of hot rolled IPE profiles surface: high quality industrial paint RAL 5010 freely adjustable cantilever arms in 100 mm increments rack uprights: base and cantilever arms bolted together increase of storage capacity with reduced floor space orderly storage of long goods Price 400€/net per upright incl. We put together your desired rack. Please contact us. Also if you want to sell a shelf. Please send pictures and dimensions we will make you an offer. Contact Firewood Blum - Mr. Blum Dominik Upon request we can also deliver your shelf For questions just call or write. Fgslqz Hsp Dukqe S Deb

Condition: new, Year of construction: 2020, tubebender-mandrelbender Zopf 32 H with small digital for programming Fgelqzjfh Nz To H S Dsb mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: excellent (used), Year of construction: 1982, Steam boiler Loos7000kg/h 13Bar in very good condition. Fgelqz H Sohqwbzs Dob

Year of construction: 2024, Condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: Fslet Hfygjqz H S Degb * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: used, empty load weight: 80 kg, axle configuration: 1 axle, first registration: 05/1981, suspension: steel, color: blue, Year of construction: 1981, Trailer: - Weber - Type A201 - EZ: 12.05.1981 - Overall dimensions: 215cm x 160cm (lxw) - Internal dimensions: 130cm x 96 (lxw) - Towing eye - Drawbar load 150kg - Unladen weight: 80kg; permissible GG: currently 450kg (trailer was unloaded, originally 930kg) - 25km/h approval - from municipal ownership, 1st hand Felqz Hoqxudto S Degb You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The subject of the sale is LOOS brand steam boilers: LOOS UL-SX 6000 steam boiler Specifications: - steam capacity 6000 kg/h - working pressure 18 bar - steam superheater - economizer - Grundfos CR feed pump - Weishaupt RGL70/1-A oil/gas burner - weight 17500 kg Fgjlqz Hjuhm Srs S Deb LOOS UL-SX 8000 steam boiler Specification: - steam capacity 8000 kg/h - working pressure 18bar - steam superheater - economizer - Grundfos CR feed pump - Weishaupt RGL70/1-A oil/gas burner - weight 22500 kg

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Costa K6 CCC 1350 wide belt sander Year of manufacture: 2016 Technical condition: very good Costa K6 CCC 1350 wide-belt sander from 2016 is a robust industrial machine for sanding and calibrating wooden surfaces. Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 It includes a steel calibration roller, a hard rubber roller and a soft rubber roller to ensure precise grinding. Additional features: Cleaning units with a combination brush and air blowing system, short workpiece presses and an air blowing system at all sanding units. Fgoljukgikoqz H S Dob Weight: The total weight of the machine is 4,300 kg. The machine is valued for its sanding precision and ability to handle large volumes of material, making it ideal for the woodworking and panel manufacturing industries.

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs Felqzsd Ey A Ao H S Dogb interpolation

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 7,771 h, load capacity: 3,000 kg, lifting height: 3,655 mm, free lift: 150 mm, mast type: duplex, construction height: 2,450 mm, power: 39 kW (53.03 HP), fork length: 1,200 mm, engine type: 4-Zyl. VW, drive type: Treibgas, LPG forklift Load center: 500 Mast type: Duplex Fgjlqstzg D Noz H S Djb Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Description: Sideshift, 3rd valve, rear working lights, front working lights, heating, full cab, LED,

Year of construction: 2004, Condition: good (used), This Costa line is for sale (is on stock) KKH-CCTT + CCTT 1350, year 2004 Under and over 266 KW 504 A 2 X Fgslqzsh Nqn Ho H S Dsb 1=steel waltz 37 kw 2=rubber waltz 25 kw 3=shue 17 kw electronic 4=shue 17 kw electronic The line is in good condition

Condition: defective spare-parts repository (used), Functionality: not functional, first registration: 09/2010, fuel type: diesel, color: orange, axle configuration: 4x4, fuel: diesel, emission class: euro5, suspension: steel, Year of construction: 2010, Equipment: ABS, additional headlights, all wheel drive, hydraulics, low noise, Spare parts carrier: - Multicar - M30 Fumo Carrier H - EZ: 29.09.2010 - Hydrostat - All-wheel drive Fgslqz Hotwzdws S Deb - Municipal hydraulics - Auxiliary headlights - Yellow light - Subframe - Missing parts see pictures - Engine damage (Euro 5 engine) Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 2017, D) Compact line for sanding calibration SOTTO/SOPRA mod. SYSTEM BT44CC 1350 RRD + RRD LOWER GROUPS MOD. B4C 1350 RRD BASEMENT * Fixed workpiece passage height at 900 mm from the ground * Insertion of ribbons from the left side of the machine * Main engines inside the base ADVANCEMENT BENCH * Motorized adjustment of the work surface with two-speed gear motor * Rear rubber-coated carpet drive roller * Device for automatic centering of the conveyor belt * Input safety microswitch for excess thickness * Useful working widths 1350 mm * Min. thickness and max. workable 3 ÷ 170 mm * Feed speed from 3.5 to 18 m/min OPERATING GROUPS * Belt oscillation with electronic control * Automatic disc brakes for quick stopping of groupsets PRESSURE SETS * Inlet grooved rubberized roller equipped with safety device to prevent pieces from returning ELECTRICAL EQUIPMENT Fgolqep D Huhoz H S Dsb * Automatic star/delta starting on the main engine * Magnetothermic protections on motors * Stabilized current power supply for electronic equipment "Hydra V-Pad" CONTROL PANEL * PLC terminal with color LCD display" * Touch screen functionality * Graphic display of the machine configuration * Machine management from touch screen, manually or through 120 configurable work programs by the user * Engagement/disengagement in working position and timing of the roller groups * Management and control of the belt advancement speed * Management and control of the working thickness * Automatic sequential ignition of the main engines * Activation and control of the timing of the belt cleaning blowers * Management of the windowed piece recognition program * Machine operation report (working hours/on hours) * Management of machine failure alarms and fault diagnosis on the electronic boards * Management of machines in compact line configuration EMERGENCIES / SAFETY * Hand protection strap at entry of pieces * Front and rear emergency mushroom switch * Lockable main switch * Automatic emergency stop of the machine in case of: - breakage of the abrasive belt - non-tensioned abrasive belt - lateral exit of the abrasive belt - opening of the access doors to the operating groups - lack of compressed air - motor overload SY B4C 1350* CARRYING BASE * * Control panel on the machine 1st OPERATING GROUP “R” R-CL 1350 * Calibrator/sanding roller assembly The group is equipped with: * Adjustment of the working position of the roller with indicator and pre-selection memory of the abrasive belt grain * Automatic disc brake for stopping the sanding belt in case of emergency * Automatic oscillation of the abrasive belt via electronic system * Abrasive belt rotating in the opposite direction to the advancement - Development of abrasive belt 1900 mm R250 Roller with a diameter of 250 mm R85 85 sh rubber coated calibrator roller with abrasive belt speed of 24 m/sec Pneumatic ON/OFF of the roller made with a pneumatic activation cylinder complete with micrometric adjustment of the position of the roller depending on the thickness of the abrasive belt Oscillating blower for cleaning the longitudinal abrasive belt The device is equipped with: - Operation of the swing with electronic system - Timed intervention activated directly by the piece being processed - Filte

Condition: excellent (used), Year of construction: 2003, Heavy calibrating grinding machine with fixed table 3 aggregates Grinding width: 1350 mm Workpiece thickness: from 3 to 160 mm, optional 220 mm Feed speed: Calibrating machines: from 3 to 15 m/min Folqz H Sst Hxgyj Djgb Grinding machines: from 4 to 20 m/min Standard equipment (selection) Costa Levigatrici Standard machine control Special equipment (selection) Contact roller setting Electronically with GSE Electric Grit Kit Pneumatically with GSP Pneumatic Grit Kit Costa Levigatrici segmented pressure pad TP 16 or Costa Levigatrici TP 32 in combination unit instead of air cushion Non-contact grinding belt control Oscillating sanding belt blowing system Up to 2 brushing units Feed table Vacuum table Suspended (floating infeed table) Automatic setting of workpiece thickness Machine control Costa Levigatrici START Costa Levigatrici PCM Weight: 3800 kg Operating voltage: 400V/50Hz Rated power/current: 49 kW/ 97A

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/2 H - two driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 720 kg Folodktlcsqz H S Djgb

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 4,423 h, load capacity: 2,000 kg, lifting height: 4,620 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,120 mm, power: 28 kW (38.07 HP), engine type: 4-Zyl. VW, drive type: Treibgas, LPG forklift Load center: 500 Mast type: Triplex Transmission: Hydrostat Condition: Ready for use and fully functional Fgjlqjui U Husz H S Djb Technical condition: Very good Front tires type: Superelastic Rear tires type: Superelastic Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, semi-cab, LED,

Year of construction: 2024, Condition: new, High productivity cabbage cutting machine S65: Cabbage cutting machine can be equipped with the transporter, cabbage destalkers, salting vat. High productivity 5000-7500 kg/h, high-quality materials as food grade stainless steel AISI 304. Can be cut whole, large cabbage heads. General Features: • Productivity 5000-7500 kg/h; • High quality, longlasting stainless steel cutting knives (up to 600 tons between sharpening); • Disc diameter of 65 cm, grants, that you can put whole large cabbage heads; • The universal cutting machine, very good for slicing, short cabbage cutting; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask; Mainly used by: Natural Sauerkraut, Kimchi, Salad producers Vegetable, salad producing and whole selling companies Fjljdv Ec Asqz H S Degb Restaurant and fast food chains Special request for machine

Condition: used, Functionality: fully functional, Year of construction: 2018, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Fslqz H Sjvbmtzj Djgb Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 4500 kg / 600 mm Opening range 1200-2350 mm ID OS1418

Condition: new, Year of construction: 2024, High performance soft and hard cheese grater. The 2.2kW motor will easily grate any cheese. By changing blades you can get vegetable slicer with the same machine. General Features: • Productivity 500-1000 kg/h; Fjlqz H Sodv Ec Us Degb • High quality, long lasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask;