Used Hurlimann H-350 for sale (32,848)

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg Cgslq S Dedhwzfj E Hjt

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Cgolq Sjvthdfj D E Hot

Condition: good (used), power: 273 kW (371.18 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,956 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL220HJ00002729 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 35.500 kg Functional Colq S Djwhfw Ro E Hjgt Lifting capacity: 10.080 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Tyre brand: Tianli Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,89x3,15x3,71 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Colq Ssvg At Uo D E Hsgt Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: new, Manual circular cold saws KKS T come equipped with everything you need for machining smaller tubes and profiles. You can cut precise miters with all models. Vises on the model KKS T315/350 are self-centering for optimal cutting. Models with 250/275 mm saw blades are equipped with a quick-action clamping vise. Cgelq S Douyifbe E Hot

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln Cslq S Djwhbgzs E Hjgt -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Celq S Djdhwzaj E Hsgt Weight: 16 kg

Condition: good (used), mileage: 234,639 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 285/70R19,5, fuel: diesel, wheelbase: 5,400 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,490 mm, loading space length: 7,290 mm, loading space height: 2,620 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Own weight: 7140 kg, Gross weight: 15000 kg, Total tank capacity: 125 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Silver, Metallic, Engine manufacturer: Mercedes, Engine power: 220 kW (295 Hp), Euro: 6, Gearbox type: Telligent, Gears: 6, Power steering, ABS, ASR, Tail lift, Tail lift design: Tailgate, Tail lift load capacity: 1500 kg, Tail lift manufacturer: B.A.R cargo lift, tail lift material: aluminum, tail lift size: 181 x 252, AIRBAG / ACTIVE BRAKE ASSIST / DIFF. SPER / TAILLIFT / HIGH PERFORMANCE ENGINE BRAKE / AHK = More information = Drivetrain Engine brand: MB Gearbox Gearbox: 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; tire profile left: 9 mm; tire profile right: 10 mm; suspension: leaf spring Axle 2: twin tires; tire profile left inside: 12 mm; tire profile left outside: 12 mm; tire profile right inside: 11 mm; tire profile right outside: 11 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 948 x 255 x 380 cm Weights Empty weight: 7,140 kg Payload: 7,860 kg GVW: 15,000 kg Functional Tail lift: B.A.R cargo lift, tailgate, 1500 kg Height of loading area: 114 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services Cslq S Dovck Irj E Hogt • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Celqewhfwwj S D E Hsgt Make of engine: D13J Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2023, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Horisontal stainless steel tank Cjlqeq Daf Ee S D E Hogt AISI 304. Newer used - NEW!

Condition: as good as new (ex-display), A demonstration double miter metal cold circular saw with 350mm circular saw blade Cutting range round/rectangle 90° 120/ 140x100 mm round/rectangle 45° right and left 100/ 100x100 mm Cgelq S Dspgmnge E Hjt speed 18/ 36 m/min Further tech. Data see pdf. Document Tech. Data and dimensions Errors excepted

Condition: used, Year of construction: 1997, operating hours: 30,251 h, lifting height: 4,440 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, total height: 3,000 mm, total length: 3,100 mm, total width: 1,500 mm, color: other, Empty weight: 7.150 kg Lifting capacity: 4.500 kg Fork dimensions: 1.170 x 1.100 mm - Lifting capacity: 4500kg - Lifting height: 4440mm - Maximum fork width: 1100mm - Number of wheels: 4 Wheels - Overhead clearance: 3000mm - Attachment: Side-shift, 4th valve to fork carriage - Options: License Plate, Verwarming, Full cabin, Air tires, Work lights - Fork length: 1170mm - Free lift: 0mm - Mast: Duplex - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: 352H02000345 - Operating hours: 30251 - Drive: Diesel - Transport dimensions: 3100mm x 1500mm x 3000mm (l x w x h) - Transport weight [kg]: 7150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Cgslq S Djwg Ai Is E Het VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Cgelowhf Hfoq S D E Het Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Cslq S D Eowhdzbo Hogt Machines are currently in production and can be viewed by appointment.

Condition: good (used), power: 309 kW (420.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 12,452 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL260HL00001089 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 39.000 kg Condition Technical condition: good Visual appearance: good Cgeljwgnzvsq S D E Hst Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,47x2,4x3,72 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Heidenhain ERN 1185.4003-02500 B8 Incremental Encoder . 258 590-25 SN: 11 801 350 , Serial No. as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Cslqoi Eah Aj S D E Hegt

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 Year of manufacture 2005 C-frame design Fixed table with lowerable basin Cgolq S D Eswhfqqo Hst Travel paths: X=350 mm, Y=250 mm, Z=350 mm Max. workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table to chuck: 150 - 450 mm Operating current: 64 amps Best achievable surface finish: Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measurement resolution Including Erowa ITS 50 pneumatic chuck Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be happy to commission the machine for you.

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Cgslq S Dowhd Eyo E Hst Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Cgolq S D Eowg Duxj Hjt Tool breakage detection

Condition: used, engine output 5 kW saw-blade dia. 300-350 mm Working speed 0-40 m/min weight ca. 1550 kg kg Concept 350 PLUS "Partnership Edition" pressure beam saw Cutting length: 3.200 mm ----- combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ----- Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including: Saw blade stand, template holder, emergency stop button, start button, selector switch Groove/score saws/saws, rotary switch feed speed, switch for Laser (option) and USB socket Partnership Edition including: - Motorized width stop with 4 aluminum stops, which move synchronously. All 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long. - Screen control (8'' touchscreen). The graphical interface offers the following functions: Tool database, angle cut calculation at the length stop, Cutting plans can be created and saved, programs can be saved USB can be saved, exported and imported. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade projection 350mm saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 - 350 mm, bore 30 mm - Rotation of saw blade: 4,000 rpm. - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min. - Total length: approx. 3,670 / 4,270 / 4,870 mm (depending on cutting length) - Weight: from approx. 1,150 to 1,550 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Suction nozzle: 1 x 100 mm, 1 x 120 mm Model variants: - CONCEPT 350 PLUS with 2,600 mm cutting length - CONCEPT 350 PLUS with 3,200 mm cutting length - CONCEPT 350 PLUS with 3,800 mm cutting length - CONCEPT 350 PLUS with 4,000 mm cutting length and bigger on request! ----- Price of the above-mentioned machine with equipment variant on request! ----- General options with extra charge: - 3410451 cutting line laser - saw motor with 7.5 kW (10 HP) including automatic star-delta Start-up - 41/03 programmable saw blade height adjustment - 3380132 Miter stop +/- 50° swiveling with length compensation, incl. Telescopic stop with folding stop - 3380135 Miter stop +/- 50° swiveling with length compensation, incl. 2 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension -3380136 Miter stop swivels +/- 50° with length compensation, including 3 Cgslq S D Estg Aiho Het Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension, 1 digital display for the miter indicator - 3380138 additional support table 800 x 200 mm, can be attached - 3515013 Auxiliary stop for long, narrow workpieces, adjustable via scale (Support table 3380138 required) - 3515014 Auxiliary stop for long, narrow workpieces, adjust...

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l Colsg Akgtsq S D E Hogt switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand BATTENFELD Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 350 Opening stroke 1240 mm Distance between bars 800x720 Mould height min 400 mm This WITTMANN Battenfeld SmartPower 350/1000 UNILOG BGP was manufactured in 2016. It is a hydraulic injection moulding machine known for its robust design and efficiency. Ideal for precision plastic processing, consider the opportunity to buy this WITTMANN Battenfeld SmartPower 350/1000 UNILOG BGP. Contact us for more information. Cgjlqswg H Uuo S D E Hst Application Types Injection Moulding

Condition: ready for operation (used), Datalogic DS 350 A / DS350A T3-F2-8/DM - DS350A T3-F2-8 / DM barcode scanner with oscillating mirror, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Cgslq S D Eei D Un As Hot

Condition: used, Year of construction: 2017, Carrying capacity: 500 kg Number of suction pads: 8 Colq S Dov Ei Sho E Hjgt With chain hoist: Yes Mounting flexible: Yes For panels: Yes Horizontal panel transport: Yes Conformity marking: CE mark

Condition: ready for operation (used), Forkardt F315 J8 H lathe chuck - outer diameter 320mm,used, good condition, 100% working, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cslq S Doulqhmj E Hogt