Used Hurlimann H-350 for sale (32,864)

Condition: refurbished (used), Piston vacuum pump. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 255 m3 / h at 50Hz. Final vacuum: 0.03 mbar abs. Csb Hbheftzt Soxqegt Any clarification, do not hesitate to contact us.

Condition: used, SNOL Type: SNOL 120/350 SNOL heat and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation through built-in fan Overtemperature protection Cjb Hbsvyfzzehxqjgt Chamber made of stainless steel Door hinge on the right, including two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1976, I-beam section - flat steel 220 bei Dm 1200 mm I-beam section - upend - mm angular steel - leg outwards 110x110x14 bei Dm 1000 mm angular steel - leg inwards 80x80x10 bei Dm 1000 mm flat steel flat 100 x 20 bei Dm 1000 mm Cgeb Hbhjvgnnksxqet T-steel / side out 120x120x13 bei Dm 1200 mm U-iron on the x-axis 22 bei Dm 1200 mm pipes 102 x 6 bei Dm 900 mm round material 75 bei Dm 700 mm square material 60 x 60 bei Dm 600 mm bending speed 3,5 m/min No. - Rolls 3 Drive 7,5 kW shaft diameter 125/135 mm weight 6,4 t dimensions of the machine ca. 2,1 x 2,4 x 1,5 m Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, pneum. regulation of the clutch pressure of the setting rollers, usable horizontal and vertical, optical read out. Machine dealer with own stock of 1600 m².

Condition: reconditioned (used), Year of construction: 2010, operating hours: 281 h, Functionality: fully functional, working width: 550 mm, area performance: 3,200 m²/h, overall weight: 292 kg, warranty duration: 12 months, water tank capacity: 60 l, KARCHER B 60 W R55 BP PACK SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) 2010 year of manufacture Machine mileage is 281 hours R55 cleaning head (550mm), equipped with two new cylindrical brushes of medium hardness, enabling work on any surface. New natural rubber squeegees Built-in battery charger and wheel drive make everyday use easier The device is equipped with a new durable drain hose and a new suction hose The new suction turbine provides high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Battery power supply (V) 24 Working width of brushes (mm) 550 Suction width (mm) 850 Theoretical efficiency (m²/h) 3300 Water tank: clean / dirty (l) 60 / 60 Brush rotation speed (rpm) 600-1300 Weight of the machine ready for work (kg): 292 INCLUDED: NEW BATTERIES GEL 6V 175Ah SIAP (4x) New 550mm PPL 0.4 cylindrical brushes (2x) Suction bar with new rubbers Built-in battery charger Tenzi Normal 5 liters liquid - FREE Cob Hbhxov Sp R Roqsgt KEY FEATURES: A 60 liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius also allows you to work in narrow passages and alleys. The squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (550mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: used, Year of construction: 1998, Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes the mixed product before filling. Sanitizing transfer pump moves the sanitizing solution efficiently. Control panel houses all operational and monitoring controls. Work Cycle of the Used Premix PARMATEC Drinkmix The Used Premix PARMATEC Drinkmix 12000 l/h follows a structured four-step process that ensures accurate proportioning and thorough mixing of ingredients. DeaerationFirst, the system removes oxygen from the water to facilitate carbonation. It does this by injecting a precise amount of CO₂ before the water enters the main tank. Additionally, a specially designed nozzle creates a “rain effect” that enhances oxygen separation. As a result, the system achieves optimal preparation for the next stage. DosingNext, the deaerated water and syrup pass through micrometric valves that regulate their flow with exceptional accuracy. Moreover, the machine displays these flow rates on dedicated graduated indicators, allowing operators to monitor the process in real time. This phase ensures that the final premix meets the beverage’s exact specifications. Final Carbonation and MixingAt this stage, the system injects carbon dioxide in the first section of the heat exchanger coil. Then, a micrometric valve controls the amount of CO₂ while a flow meter displays the exact level. Immediately after injection, carbonation and final mixing take place, ensuring a uniform and well-integrated product. Finally, the last section of the coil, which operates under high pressure, forces the product to fully absorb the CO₂. Cebov Ai Hys Hbhxqogt Storage and StabilizationFinally, the process moves to storage and stabilization inside a pressurized tank. Because this tank operates under controlled conditions, it ensures continuous product flow to the filling machine. At the same time, it allows the necessary resting period for product stabilization. In addition, a specialized regulation system maintains CO₂ pressure at a consistent level, preserving beverage quality.

Condition: used, Technical details: faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm * Cgeb Hbsu Nk T Sehxqet

Year of construction: 1986, Condition: used, Functionality: fully functional, machine/vehicle number: 7080/86, Used steam boiler 3,9 MW. Cgeb Hbhxov Int Nsqet

Year of construction: 2003, Condition: ready for operation (used), Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible. Cobjv Np U Rs Hbhxqogt

Year of construction: 2007, Condition: good (used), Volume flow 4,6 m3/min. Pressure output 10 bar Cobsi D D Nis Hbhxqjgt Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz connection thread 1 1/2 inch Operating hour : 8000h With compressed air dryer !!! Space requirement L x W x H 1850 x 1050 x 1760 mm weight 910 kg good condition

Condition: used, Year of construction: 2005, Functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Cebet A Ukae Hbhxqogt Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: new, Year of construction: 2022, Functionality: fully functional, cooling capacity: 320 kW (435.08 HP), type of input current: three-phase, overall weight: 3,843 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, volume flow: 55 m³/h, frequency: 50 Hz, total width: 2,210 mm, total length: 4,600 mm, total height: 2,500 mm, noise level: 65 dB, protection type (IP code): IP54, HITEMA INTERNATIONAL CHILLER TFVF.350 FREE COOLING CAPACITY 320KW ATTENTION: > R-1234ze refrigerant type > This refrigerant is classified in group 2 'non-hazardous' according to the criteria of the Pressure Equipment Directive (PED) 97/23 / EC and 2014/68 / EC. According to IS0-817, the R-1234ze is classified in the A2L security group > Local codes the construction and safety standards must be respected > In the absence of local codes and standards, consult the guide to EN-378 (2017) (safety requirements for substances classified as A2L) or IS0- 5149 (2014) (for substances classified as A2L) > It is the responsibility of the installer to obtain approval from the local construction authorities Cgsb Hbhxsv Rmdroqjt

Condition: excellent (used), Year of construction: 2010, Rough 350 Year of construction: 2010 X-path: 565 mm (+265 / -300mm) Y-path: 784 mm (+565 / -219mm) Z-path: 800 mm Control system: Siemens 840D Solutionline Max. Spindle speed: 16,000 min/-1 Tool holder: HSK-63 Pallet size: 400 x 400 mm Number of pallets: 2 Number of tool positions: 44 + additional magazine with 99 tool places Machine weight approx. 17 tons Machine documentation Chip conveyor Internal coolant supply Measuring probe: m+h IRP 25.41 Spindle hours: Spindle was replaced in January 2019 Cgjb Hjrgq Dkjbhxqot WITHOUT tools

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, working width: 380 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 16 l, HAKO SCRUBMASTER B12 TB380 SCRUBBERS NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW SPE 24V 4.5A INTERNAL RECTIFIER 2019 production year 380mm cleaning head (TB380) equipped with a new medium-hardness disc brush, allowing work on any surface. New polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. The device is equipped with a new durable drain and a new suction hose A new, efficient suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (cm): 38 Suction width (cm): 47 Efficiency (m²/h): 1,500 Number of brushes (pcs.): 1 Clean water tank capacity (l): 16 Dirty water tank capacity (l): 22 Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Power (kW): 0.54 INCLUDED: NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW BATTERIES INTERNAL SPE 24V 4.5A NEW 380mm PPL 0.5 disc brush NEW suction turbine NEW drain hose NEW suction hose Suction bar with new oil-resistant rubbers Tenzi Normal 5 liters liquid - FREE Cgsb Hbhov Rx Rqsxqet KEY FEATURES: A 16 liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (380mm) ensures high surface efficiency A very legible and intuitive control panel.

Year of construction: 2007, operating hours: 100 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: EN 133445-3, A complete line for the production of margarine, confectionery fats, shortening, etc. is sold, with an additional line for milk powder and an automatic CIP rinsing system. Cgob Hju Dmlmsbhxqst It combines equipment from the following manufacturers: CHEMTECH, ALFA LAVAL, TMCI Padovan, O/K Internatsonal, FAVEO, Bortolinkemo, Atlanta, Cidiesse. The plant is located in Chornomorsk. Both lines were installed in 2012, produced one batch and shut down. The equipment needs to be dismantled. More info by phone and presentation on request. Terms of sale: contract, cash on delivery, dismantling and shipment by agreement. Description of margarine production lines Composition of line A. - four 5 m3 tanks for emulsion preparation with stirrers and pumps. The tanks are mounted on strain gauges; - four 50-liter tanks for flavoring and coloring with peristaltic pumps; - main heat exchanger-pasteurizer of 3 sections of plate type; - main piston pump; - block of creamers (C1+C2); - block of creamers (C3+C4); - working module with 2 pin rotors; - working module with 2 pin rotors. A separate option (with the possibility of connecting) in the line is an aging pipe and a molding kempak machine for the production of margarine for puff pastry. Line capacity: 5 tons/hour for industrial margarines, 1 ton/hour for puff pastry margarine. Composition of line B. - two 5 m3 tanks for preparation of emulsion with stirrers and pumps. The tanks are mounted on strain gauges; - one 50-liter tank for flavoring and coloring with a peristaltic pump; - plate-type heat exchanger-fuse; - main piston pump; - block of kemetators (C1+C2); - block of kemetators (C3+C4); - working unit with 2 pin rotors; - working unit with 2 pin rotors. The line capacity for industrial margarines and shortening is 5 tons per hour. Two parallel lines for containerization and filling of margarines consist of:  unit for forming cartons;  unit for lining cartons with plastic film;  station for filling margarines into cartons;  unit for sealing cartons;  printer for printing on cartons. Three tanks for SIR washing are installed to wash the production lines and equipment. The tanks are designed to prepare cleaning solutions and clean water for washing. The washing station is equipped with a pump. All processes of product production, container formation, filling and packaging, and transportation of boxes are automated to the maximum extent possible. The level of automation is PLC plus SKADA. To produce new fatty products, Chemtech International Ltd. supplied a pilot margarine plant with a capacity of 120 kg/h. Function: Production and packaging of margarine, confectionery, culinary and bakery fats, as well as for the dairy industry with a capacity of 12.4 tons per hour or production and packaging of margarine for puff pastry with a capacity of 4.5 tons per hour. Function: Manufacturing and packing of confectionery and bakery fats, and dairy industry with a capacity of 18.6 tons per hour or manufacturing and packing of fats for dairy products, cocoa oil substitutes with a capacity of 12.4 tons per hour. Located in Chornomorsk. Both lines were installed in 2012, made one batch on it and stopped. The equipment needs dismantling. More information by phone and a presentation on request.

Condition: new, Year of construction: 2025, Mobile Concrete Batching Plant PROMAX M120-TWN (120m³/h) Plant Type : Mobile Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 120m³/ hour freshly compressed concrete Mixer Capacity: 4500/3000 lt (3m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. *Aggregate Feeding system. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Csb Hbjflz Hqjhxqjgt Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Year of construction: 1996, operating hours: 470 h, Condition: good (used), Diesel pump set, Sprinkler aggregate Manufacturer: SISU Cobof Aa Aqe Hbhxqjgt Type: 420DSJPL Year of c.: 1996 Output: 120 kW, 2940 rpm Pump: Mx125-250 Capacity: 358 m3/h Total head: 86 m Power: 110 kW Weight: 1200 kg Operating hours: cca 473 hours The turbo and the exhaust manifold are missing. If you need more information. We are here to help! Please contact us using the form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2024, Condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota VAT/margin: VAT qualifying Serial number: 350240158 Transport dimensions (LxWxH): 1.2x1.2x2.51 Cob Hsu Sfyxjbhxqegt Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Ceb Hbheikq Tyexqjgt Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Year of construction: 2024, Condition: used, Type of fuel: Diesel New: No Cebju H Tw Ue Hbhxqogt Field of application: Construction Make of engine: Kubota VAT/margin: VAT qualifying Serial number: 350240094 Transport dimensions (LxWxH): 1.2x1.2x2.51 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Functionality: fully functional, Orion KHA750A dry-run, oil-free vacuum pump Cjb Hbhjufh Upsxqegt Oil-free (dry scroll, i.e. dry scroll) pumps have a low final vacuum and enable high pumping speeds. Pumping capacity 145 l/min Pipe connection: RC 1/4 -- diam. 70mm Operating pressure: 8 - 48 kPa Air temperature: 0-40 °C, humidity: normal level (65 ± 20%). Several pieces in stock

Year of construction: 2024, Condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota VAT/margin: VAT qualifying Serial number: 350240160 Cjb Hbheu Hfn Eexqogt Transport dimensions (LxWxH): 1.2x1.2x2.51 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Functionality: fully functional, power: 5.5 kW (7.48 HP), fuel type: electric, Year of construction: 2006, Low speed grinder, granulator, crusher Power: 5.5kW Inlet opening: 565x455mm Capacity: 60-75 kg / h Cjb Hbohlkgfohxqjgt Weight: 1t Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Year of construction: 2024, Condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota VAT/margin: VAT qualifying Ceb Hbhsu Epmcjxqegt Serial number: 350240090 Transport dimensions (LxWxH): 1.2x1.2x2.51 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: excellent (used), power: 15 kW (20.39 HP), overall weight: 200 kg, Year of construction: 1995, Hidrostal Submersible Pump 15kw sewage pump Cob Hbjruax Uohxqegt manufacturer HIDROSTAL Type: Year of manufacture: 1995 Delivery capacity: 250-300m3/h lifting height: 21m Power: 15kw 400v 50Hz 32.5A revolution: 1410 rpm protection: IP 54 Sizes: height: 1050 mm width: 700mm weight: 200 kg

Condition: used, Year of construction: 2015, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Cgsb Hbhxjukg Sreqet Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm