Used Hurlimann H-6130 for sale (24,107)

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Siemens 840 DSL X-axis travel: 550 mm Y-axis travel: 450 mm Z-axis travel: 375 mm Tool changer Capacity: 40-station Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling system Coolant and lubricant treatment system: Knoll Further information according to the manufacturer - without guarantee Swivel table / counter bearing with face gearing: Swivel time 0 - 180° approx. 3.0 s Prepared for A and U axes: yes Support for X / Y clamping blocks: yes Speed range A and U axes: 1 - 50 rpm Dujlrswhdp Eea Eizst Speed range C-axis: 7-station 4-axis Speed range: 10 - 10,000 rpm (1 - 17,500 rpm) Ramp-up time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Tool change system: Pick-up Max. tool diameter: 70 mm / 160 mm (adjacent position free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Machine weight: 8.3 t Total connected load: approx. 64 kVA Control system: Siemens SINUMERIK 840 D

Condition: good (used), Year of construction: 2021, operating hours: 3,280 h, Functionality: fully functional, machine/vehicle number: 33661, total width: 2,645 mm, total length: 10,665 mm, total height: 5,385 mm, rotor length: 2,000 mm, rotor diameter: 700 mm, nominal power: 294 kW (399.73 HP), TECHNICAL DETAILS Suitable for, for example: waste wood, pallets, railway sleepers, household waste, commercial waste, bulky waste, cable drums, tires, paper rolls, green waste, mattresses, roots, aluminum, food waste Engine: Scania engine, only 1,011 hours Drive power: 294 kW Discharge conveyor width: 1,400 mm Discharge height: max. 4,800 mm Shaft length: 2,000 mm Duelrswhkp Ssa Eizet Tool shaft diameter: Ø 700 mm Operating time: 3,280 h Waste wood capacity: up to 65 t/h Green waste capacity: up to 60 t/h Household waste capacity: up to 50 t/h Bulky waste capacity: up to 40 t/h Industrial waste capacity: up to 45 t/h Dimensions and weight Machine weight: 25.5 t Overall length: 10,665 mm Track length: 3,965 mm Total height (including loading opening): 5,385 mm Loading height: 3,150 mm Loading opening area (top): 750 mm Width (total): 2,645 mm Feed hopper width: 2,200 mm Discharge belt height (max.): 3,750 mm Discharge belt incline angle: 22.5° EQUIPMENT - Lifting magnet with hydraulic height adjustment via radio control - Extra-strong neodymium magnet - Aggressive feed - No winders - Four shredding programs for wood, green waste, garbage, and individual shredding - Shaft speed, direction of rotation, and reversing times freely programmable - Crushing bar with quick-change system - Convenient access to the shredding shafts - Color multifunction display for machine operation and data evaluation - Radio remote control for machine control

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,088 h, Functionality: fully functional, working width: 900 mm, workpiece height (max.): 100 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, Deburring machine with 3 units and wet separator TECHNICAL DETAILS Working width: 900 mm Workpiece height: 100 mm Grinding belt and feed Grinding belt dimensions: 930 × 1,900 mm Feed speed: 2.5 – 14 m/min Unit speeds 1st unit, 2-speeds: 11 and 22 m/s 2nd unit, 2-speeds: 11 and 22 m/s 3rd unit: 18 m/s MACHINE DETAILS Dimensions (L × W × H): 2,300 × 1,500 × 2,300 mm Machine weight: 3,000 kg Operating hours: 10,088 h EQUIPMENT - W sanding belt unit - B brush unit for finishing sanding and light edge rounding - Roller unit (W) - Integrated extraction system W 2000 series wet scrubber with 3.0 kW power available; year of manufacture: 2021 Special sludge container available ATEX Zone 2 Duelra Eowf Iqhoizot

Condition: ready for operation (used), Year of construction: 2008, operating hours: 687 h, Functionality: fully functional, machine/vehicle number: A.1002669.01, travel distance X-axis: 1,800 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN iTNC 530 CNC, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 56, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 1,800 mm Y-axis travel: 840 mm Z-axis travel: 800 mm Table Table length: 2,430 mm Table width: 815 mm Spindle Spindle speed: max. 6,000 rpm Spindle mount: SK 40 Tool holder: 40 mm Dslowd Sirora Eizsut Tool magazine Number of tool positions: 56 Tool holders included: 30 Control Control model: HEIDENHAIN iTNC 530 CNC MACHINE DETAILS Overall length: 10,700 mm Overall width: 3,300 mm Overall height: 3,900 mm Weight: 15 t Connected load: 60 kVA Control power-on time: 27,210 h Machine operating time: 687 h Spindle run: 304 h EQUIPMENT - Machine vices not included - Mounted machine tool not included Transportation on trucks up to 3,000 mm wide possible

Year of construction: 2020, Condition: like new (used), Functionality: fully functional, TECHNICAL DETAILS Measuring distance: 1 m (system on a 0.8 m table, microphone at a height of 1.6 m) Control: Touchscreen Flow and injection Max. flow rate: 350 mL/min Max. injection range: up to 100 g Speed and acceleration Loading speed (setpoint): 500 rpm Loading acceleration: 28 g Duslrewh Rx Hea Eizet Elution speed (setpoint): 1,200 rpm Elution acceleration: 163 g Speed range: 100 – 2,000 rpm Acceleration range: 1 – 452 g MACHINE DETAILS Dimensions (W x D x H): 570 x 520 x 460 mm Weight: 115 kg EQUIPMENT In addition to the CPC 1000 PRO, the system includes: - PLC 2500 UV-1 - QUAT GRAD, 3/16 (PLCA 2500) - AUTO INJ VLV W/TBNG KIT PLCA 2250/2500 - Sample loop, 50 ml PLCA, 1/8" - External injection pump (50-300 mL/MIN) - DAD-4WL, 190-840 NM, PLCA - Rack funnel, 16 outlets, PLCA - AUTO BKFLSH VLV W/TBNG KIT PLCA 2250/250

Condition: reconditioned (used), Year of construction: 1995, operating hours: 64,000 h, Functionality: fully functional, power: 551 kW (749.15 HP), No reserve price - guaranteed sale to the highest bidder! Engine was rebuilt in 2017. Dujlrjwgc A Ioa Eizjt TECHNICAL DETAILS Engine power: 551 kW Concrete garage / container dimensions (L x W x H): 9,000 x 3,000 x 4,000 mm MACHINE DETAILS Operating hours: approx. 64,000 h Engine overhaul: carried out in 2017 at 48,500 h Turbocharger overhaul: carried out at 60,000 h EQUIPMENT - Concrete garage with silencer - Additional oil cooler

Condition: new, Year of construction: 2024, Functionality: unexamined, machine/vehicle number: 0-201-73-9344, workpiece length (max.): 6,400 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 260 mm, total height: 2,250 mm, total length: 11,100 mm, total width: 5,650 mm, overall weight: 7,800 kg, type of input current: three-phase, motor voltage three-phase: 480,277 V, This is a brand-new unit manufactured 11 / 2024. Machine was dropped on its base while unloading at customers location, minor damage but will no longer be warrantied by the manufacturer. Machine is complete, still packed in original shipping crates and boxes and includes 6 new Becker Vacuum pumps. Machine is located in our warehouse in Dallas, Texas. Contact for more information or to schedule an inspection. Max. workpiece dimensions L x W x T mm 6 400 x 1 550 x 260 Duolra Eiowii I Njzet Assembly dimensions L x W x H mm 11 100 x 5 650 x 2 250 Vector speed m/min (X-Y) 141 - (Z) 19 Compressed air bar 7 Compressed air connection Inches R 3/4 Suction stubs mm 2 x 250 Suction capacity m3/h 2 x 4 950 Electrical connection value kW 46

Condition: good (used), Year of construction: 2014, Durr Ecoclean Universal 81W Aqueous Parts Washer Year: 2014 Delrsrzufkea Eizout SN: CK-4900100153 Basket size approx.: 670 x 480 x 300 mm Max batch weight: 150 kg Total fluid capacity: 1300 ltr Weight unfilled: 3500 kg Dimensions: 3200 L x 1800 W x 2300 H mm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 76,276 h, Functionality: fully functional, pressing force: 50 t, distance between stands: 1,040 mm, bending length: 1,270 mm, TECHNICAL DETAILS Pressure: 50 t Dslrewf Hh Eea Eizeut Bending length: 1,270 mm Folding column width: 1,040 mm Control system Control system: Cybelec / Delem Controlled axes: y1, y2, x, R, z1, z2 MACHINE DETAILS Total power requirement: 8.6 kW Machine weight: approx. 4,750 kg Space required: approx. 2,000 x 2,100 x 2,400 mm Operating hours: 76,276 h EQUIPMENT - Side safety doors - Material support arms - Foot switch - 4 manual stop fingers

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swivel axis: 101° BT axis: 0 – 180° V-axis within work area: -40 to -496 mm V-axis outside work area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Turning spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Driven tool speed: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-station with driven tools Tool changer: 32-station Additional magazine: 64-station MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation dimensions (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg Dslra Eiswd R Exjzsut EQUIPMENT - Coolant system - Breuning Simag bar loader, built in 2014 - Tool measuring system - Internal cooling system with 70 bar internal cooling - Driven safety door - Technical documentation - Manual - Continuously adjustable speed - Transport on a standard truck possible

Year of construction: 1994, Condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm Djlra Eisdkx Anozjut - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: K-89404748-10327777, type of input current: three-phase, total width: 2,134 mm, total length: 4,268 mm, total height: 2,750 mm, input voltage: 460 V, frequency: 60 Hz, 3 phase, 460v (5) Washing valves, (1) Fill head Dujlra Eijv Ncmyozjt Capacity: 30-90 kegs/hr (15.5gll clean and fill time: 2 mins) Compatible keg sizes: 7L to 58L (239mm to 425mm D x 320mm to 610mm H) Also compatible with disposable Petainer kegs Filling Accuracy +/- 0.19% Integrated exterior and interior washing, racking, filling, control, and exit conveyor w/ slide Requires de-install in Michigan, USA. Contact us for details!

Year of construction: 2023, Condition: new, Functionality: fully functional, operating temperature: 1,500 °C, COMPLETE SYSTEM INCLUDING: Duolra Eetxbuxoizjt (2) NEL C30 Hydrogen Generators On Site Gas System N-500 TGN Nitrogen Generator 110 MoLa Carrier Tray Sets RO/DI Water System Bus Rail TRAY SIZE: 330 mm W x 330 mm L LOADING HEIGHT: 300 mm H CAPACITY IN 316L CYCLE: 8-10 Trays/hr NUMBER OF REST DEBINDING ZONES: 10 x 20 kW Top/Bottom Control NUMBER OF SINTERING ZONES: 10 x 30 kW SEGMENTS OF COOLING ZONE: 2 x 3m, 1 x 2m +Belt Drive and Return MAXIMUM TEMPERATURE REST DEBINDING: 800 C MAXIMUM SINTERING TEMPERATURE: 1,500 C PROCESS GAS CONSUMPTION (H2): 30-50 m3/h PURGE LOCK NITROGEN GAS CONSUMPTION: 34 m3/h POWER CONSUMPTION: 70kWh COOLING WATER CONSUMPTION: 3 m3/h POWER: 3 x 480V / 60Hz INSTALLED POWER: 500 kW IDLE MODE NITROGEN GAS CONSUMTPION: 15-16 m3/h IDLE MODE HYDROGEN GAS CONSUMPTION: 1-1.5 m3/h

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE Dueljvniaksra Eizot 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Machining Length     27.38"

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Duelrsv S Iqcja Eizet total power requirement 4 kW

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, Functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. Dujlra Ejwd N D Toizet TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: Delra Ejrtrvyoizjut -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, total power requirement 1 kW Dolrov Sdytja Eizeut weight of the machine ca. 0,2 t dimensions of the machine ca. 620 x 720 x 400 mm m

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, Functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Delra Eewd Ni Asizjut Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Duslrjrtrxiea Eizet Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Motor output 3 kW total power requirement 3 kw Dujlra Eisv Nq Skezet Weight 1.400 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: Dueloruakgora Eizet B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1994, Motor output 3 kW total power requirement 6 kw Dolrov Nq Sdsa Eizeut Weight 1800 kg

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Delertrykjra Eizsut Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1992, Motor output 3 kW total power requirement 6 kw Weight 1800 kg Dujlra Eiov Nq R Tszot