Used Valtra/Valmet 8050 Hi-Tech for sale (144,459)

Condition: used, Year of construction: 2021, operating hours: 364 h, Field of application: Construction Serial number: 30540xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19514 Specifications: - 2021 model - Hours: approx. 364 - Weight: 6550 kg - 88.4 kW - Chassis (see pictures) - Box - Lever steering - Two cameras, bottom and top - Extra light Description: Takeuchi TCR50 Crawler Dumper from 2021. It has only had 364 hours and is in excellent condition. The box is improved. Hardox plates have been placed on the bottom and the frames have been increased by 20 cm. Colqovyft Rjza Rxerb It is certified and ready to be put into operation. Can be delivered within a short time. Watch video. Hours: 364 Own weight: 6550 Kw: 88.4

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Crslqzeflz Hdsa Rxsb Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, fuel type: diesel, Year of construction: 2014, operating hours: 12,624 h, Field of application: Construction Cslqzajwhih Ts Rxorb Empty weight: 40.000 kg Production country: NL Please contact Kristoff Van Havere for more information

Year of construction: 2025, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows Crelqzaet Dig Ee Rxjb - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: new, color: yellow, Year of construction: 2024, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Cjlqzasiit Erj Rxerb Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Year of construction: 2010, Condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Cjlsiy D Tmoqza Rxorb Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Year of construction: 2006, Condition: not inspected (used), Functionality: limited functionality, machine/vehicle number: OS3030, Lenntech Water Treatment (mini plant) on skid uses Reverse Osmosis systems to purify water. Model number os3030. Reliable brand from Lenntech (The Netherlands) is one of the leading companies in water treatment suitable for small businesses. This machine is ideal for water-treatment required in the industrial, agaric, cosmetics and food industries. Crelqjwhdzueza Rxsb - Small plant on skid system easy for transport including pumps - Includes large SS buffer tank to store the treated water so it can be immediately tapped. - Please not machine is working. However since it has been out of commission it needs to be checked and serviced before use Dimensions of lenntech water treatment skid (L: 220CM, W: 70 CM, H: 180 CM Water buffer tank size (L: 160 CM, W: 90 CM, H: 160 CM) Transport ready Prices are excluding VAT and transport

Condition: good (used), Functionality: fully functional, Length: Diagonal 190 cm Horizontal 90 cm Crslqzajv I Umvj Rxeb Width 30 cm Height of crossbeams 4 cm 3 pieces available! Price €800 each!

Condition: good (used), Silverson High Sheer Mixer Model No. HZ60 Crelqowfh Dbjza Rxeb Mounted on mobile lifting hoist / frame

Condition: new, Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, volume flow: 420 m³/h, Equipment: chassis, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Cslqza Rounh Nmexorb Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr230983, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Celqza Rjwfq Atexjrb Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Single-column hydraulic press with die cushion HIDROGARNE Type CF 80 Machine No. 2955, Year of manufacture 2015 First commissioned 2016 Pressing force 80 tons Slide stroke 450 mm Thrust 340 mm Installation height 650 mm Table area 800 x 550 mm Table bore Ø 55 / 30 mm Slide area 650 x 400 mm Die cushion force 25 tons (250 kN) Ejector force 25 tons (250 kN) Die cushion stroke 200 mm Die cushion area 500 x 380 mm Table height above floor 910 mm Max. hydraulic operating pressure 280 bar Hydraulic tank capacity 130 liters Advance speed in rapid traverse 110 mm/sec. Pressing speed 10 mm/sec. Return speed 160 mm/sec. Crolqzaewd Sy Re Rxsb Drive power 7.5 kW Power supply 400 V, 50 Hz - Operation and programming via SIEMENS touch panel - Ram stroke and press force programmable via the control system - Pressure and travel cut-off - Continuously programmable pressure hold time - Ram and die cushion equipped with direct travel measuring system - Die cushion under the table can also be used as an ejector - Table surface with holes for die cushion push rods - SICK light barrier as an anti-interference device for safety operation - Control cabinet with electrical control mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Foot switch operation only - Operating instructions and electrical diagram available - Accident prevention regulations for manual insertion work Press footprint L x W x H 1500 x 1260 x 2640 mm Weight 3.4 tons In very good condition

Condition: used, power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2017, operating hours: 9,898 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDDQ50L00080121 Technical information Track width: 80 cm AdBlue system: Yes Make of engine: 6HK1 Empty weight: 35.600 kg Other information Undercarriage condition: 95 Celqzjv Iuy Nsa Rxerb Dipper / stick length: 290 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 114x36x33 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information NEW UNDERCARRIAGE!

Year of construction: 1998, Condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE Crsljirfpgoqza Rxeb MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Silverson High Sheer Mixers Qty 2 available Crjlowfhz Tjqza Rxob Model M-Series Model WDA7190 Both mounted on frames Three phase power

Year of construction: 2025, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Celsunh H Ssqza Rxjrb Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Machine type: Two-roll round bending machine for gutter production Condition: good Offer type: used machine Technical Data: Capacity: 2040 x 1.0 mm Drive type: el. / mech. Crjljq R Ub Aoqza Rxob Drive: 0,8 kW Remark: with 4 shafts for different gutter diameters: 55, 60, 70, 85 mm Weight: 550 kg The machine is in good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,560 h, Shredding plant for domestic and commercial waste, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS electric motor 132 kW, Crjlqza Rov Hr Nxexeb cutting chamber approx. 2800 x 1300 mm, shaft length: approx. 2400 mm, inlet funnel 4000 mm x 2500 mm, subframe divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm, viewing and test run possible by appointment

Year of construction: 2020, Condition: used, General information New: Yes Serial number: 1034140 / 9290341 Weights Empty weight: 605 kg Condition General condition: very good Cslqjv Rvfrjza Rxsrb Technical condition: very good Visual appearance: very good Other information Fits to following machines: EX1200-6 EX1200-5 Delivery terms: EXW Production country: JP Additional information Please contact Bart Apers, Jeroen Heindryckx or Matthias Eyckmans for more information

Condition: good (used), power: 122 kW (165.87 HP), color: orange, Year of construction: 2015, operating hours: 4,290 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMLBA5ZJ00030268 Technical information Drive: Wheel Make of engine: AM-4HK1X Top speed: 35 km/h Empty weight: 19.360 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Output of the auxiliary hydraulics: 157 l/min Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,82x2,75x3,13 Production country: JP Additional information Cjlqzaswc S Ryj Rxjrb Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: good (used), power: 296 kW (402.45 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 6,607 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMJAQ53P00070055 Technical information Track width: 75 cm AdBlue system: Yes Make of engine: VE-6WG1XBSA-03 Empty weight: 52.200 kg Functional Bucket capacity: 2 m³ Condition Technical condition: good Visual appearance: good Other information Cslowaq E Djqza Rxerb Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 0,0121x0,0038x0,0037 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 10,316 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDDQ5XH00030379 Technical information Track width: 60 cm AdBlue system: Yes Make of engine: AQ-6HK1X Empty weight: 35.600 kg Functional Bucket capacity: 1,81 m³ Condition Technical condition: good Visual appearance: good Other information Dipper / stick length: 230 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,5x2,99x3,6 Production country: NL Cslewaq Eweqza Rxerb Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 78 kW (106.05 HP), fuel type: diesel, color: orange, Year of construction: 2017, operating hours: 8,660 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDAS5YV00500466 Technical information Track width: 70 cm AdBlue system: Yes Crolqzjwbcutsa Rxsb Make of engine: AR-4JJ1X Empty weight: 14.400 kg Condition Technical condition: good Visual appearance: good Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 7,4x2,67x2,8 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 197 kW (267.85 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 7,600 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDDN5XA00020039 Technical information Track width: 90 cm AdBlue system: Yes Make of engine: AQ-6HK1XASA-02 Empty weight: 31.600 kg Condition Technical condition: good Visual appearance: good Other information Cjlqza Rev Tuhwsxorb Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,7x3,5x3,4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 122 kW (165.87 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 9,553 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDCN5ZV00305066 Technical information Track width: 80 cm Empty weight: 25.900 kg Make of engine: AM-4HK1X Functional Bucket capacity: 1 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,5x3,2x3,1 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Cslqzjv N Tqvsa Rxsrb