Used Towerlight Superlight Vt1 Al for sale (135,548)

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 60 mm throat 400 mm bore stroke 240 mm 5 speeds 63 - 1250 U/min table-size 840 x 670 mm total power requirement 4 / 5,5 kW weight 1450 kg dimensions 1000 x 1400 x 2450 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head Cob Hn I Eewcg H Ajiegt * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: excellent (used), Year of construction: 2000, saw band length: 5,620 mm, Fully automatic band sawing machine Fab. KALTENBACH Typ. KB 305 NA Year 2000 Technical data Make: Kaltenbach Type: KB 305 NA Year of manufacture: 2000 Voltage: 380 V, 50 Hz Saw blade: 5,620 x 34 x 1.1 mm Saw motor: 5.5 kW Total: 7.2 kW Dimensions (L x W x H): 3.4 x 2.10 (plus roller conveyor) x 1.80 m Weight (without accessories): approx. 3.1 t Working range: Round material: max. 305 mm Square: max. 305 x 380 mm Belt speed: infinitely variable 16 - 96 m/min. Equipment - several saw blades according to photos - NC control - Infeed - roller conveyor 2.1 m - Automatic material feed by means of gripper - chip conveyor - Hydraulic saw band feed Csb Hnjtdnm Nj I Eijgt - Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Cgeb Hn I Eswfq T Ssiot Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: new, Year of construction: 2025, DALBO Powerroll 1230 New machine, built in 2025 12.30 m working width 8,120 kg net weight SNOWFLAKE rings with a diameter of 55 cm Air brake Hydraulic folding Lower linkage attachment | Internal No.: 11280562 Cjb Hn Ijwanzpo Eiogt

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, CNC milling machine Portal milling machine type Nesting working area X-axis 2,600mm Cgob Hn I Esv T Akyoiot working area Y-axis 1,300mm working area Z-axis 200mm drive Servo Vacuum table Vacuum pump 100M3/H AdTech CNC Controller UcanCam CadCam Software V11 Standard Endless possibilities: milling, relief, photos, Fusion, contours, smoothing oak leaves, milling DXF- DWG- Logos, ...,.. and much more in materials: mdf, melamine, carbon, Trespa, dibon, Alucarbon, PP, PPE, wood,

Condition: used, overall weight: 18,000 kg, empty load weight: 3,280 kg, maximum load weight: 14,600 kg, axle configuration: 2 axles, first registration: 09/2013, suspension: air, tire size: 265/70 R19,5, wheelbase: 5,030 mm, Equipment: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | Disc brake BPW | TÜV valid until | Errors, input and advance sales reserved. Cjb Hnjwd Sdcs I Eijgt

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Including hydraulics Cgsbewhdr Ho Hn I Eiet

Condition: excellent (used), Year of construction: 1977, Panel saw Cjb Hn Iswc Svpe Eiogt Scoring unit Year of manufacture 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information Ceb Hnewhb R Hs I Eisgt - Distance between table and press beam: 1,800 mm

Condition: new, k50 Chinook Shamal 1250L/min compressor pump Delivered complete with pulley. Pulley is for 2x V-belt, B = 17mm Pump is new !!!! Delivered without oil !!! Industrial Quality Made in EU Internal code DNN Product may differ slightly from the photo, including the color. All employees speak Dutch, German and English Prices are exclusive of VAT Shipping is possible (surcharge) Cebowgwyuo Hn I Eiegt (Changes and errors in the technical data, information and prices and prior sale reserved)

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2430 mm Measurements depth 3020 mm Measurements height 2963 mm Machine weight 5800 kg Control Unit Brand FANUC Model 0i-M Main Drive Number of spindles 1 Spindle speed range 150-12,000 Number of axis 3 Movement X-Axis Movement 850 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 530 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 24 This 3-Axis vertical machine center was manufactured in 2015. The CHEVALIER QP2033-L features a robust 1,000 x 510 mm table, capable of handling loads up to 500 kg. It offers a travel range of 850 mm in X, 530 mm in Y, and 510 mm in Z, with rapid traverse speeds reaching 36 m/min in X and Y, and 24 m/min in Z. With a high-speed spindle operating up to 12,000 rpm and a 24+1 tool capacity, this machine ensures efficient machining operations. The CHEVALIER QP2033-L machine we have for sale is like new and available immediately. For further details, please contact us to learn more about this precision machine center. Application Types Milling Cebevt Eyqe Hn I Eiogt

Condition: used, Year of construction: 2006, Field of application: Construction Serial number: 20000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20082 Cjb Hov U Tbrjn I Eisgt Description: 2006 Palfinger crane. The oscillation was a little slow the last time they used it. The crane has not been used for 4-5 years. Does not come with generator. Ready for delivery.

Condition: used, Year of construction: 2022, Functionality: fully functional, In this offer you purchase a used roll cutter ‘Kala XY PRO 1650’ Object of sale: 1 x Kala XY PRO 1650 from 2022 mint condition Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. Cgsbswckqxs Hn I Eiet For further information, you can of course also contact us personally.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, axle configuration: 3 axles, loading space volume: 54 m³, first registration: 06/2020, suspension: air, tire size: -, Year of construction: 2020, * Volume: 54.7 m3 * Walkway * Side cover * 2 hatches * On-board wash * Grain chute * Side release * Manual AWD * Automatic lowering suspension * Aluminum rims * Disc brakes Cgeb Hn Iowg Hyqe Eiot * Spare tire carrier * 8mm floor / 6mm sides * Internal dimensions 10.60 x 2.45 x 2.10m Tire information: 385/65R22.5 Grain tipper Body: Aluminum

Condition: good (used), Year of construction: 1989, spindle speed (max.): 900 rpm, spindle speed (min.): 250 rpm, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 190 mm, grinding wheel diameter: 200 mm, overall weight: 2,000 kg, rotational speed (min.): 3,000 rpm, Workpiece diameter max.: 320 mm Max. workpiece length between the tips: 400 mm Longitudinal movement (X-axis): 400 mm Vertical movement (Y-axis): 250 mm Cgob Hewhbr Rjn I Eiot Transverse movement (Z-axis): 190 mm Sanding head, swivels around the vertical axis: 360° Sanding head swivels around the vertical axis: 220° Max. grinding wheel diameter: 200 mm Grinding spindle diameter max.: 70 mm Speeds (pole-changing): 3000 - 6000 min^-1 | 4500 - 9000 min^-1 Drive power (pole-changing): 2.4 / 3.0 kW Center height / with intermediate plate: 165 mm Workpiece holder: ISO 50 Tailstock taper: MK 3 Total weight of machine: 1605 kg Total weight of switch cabinet: 310 kg Connected load: 12 kVA Comprehensive technical documentation is available.

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 650 mm largest grindable workpiece diameter 360 mm max load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Cgjb Hnotqf Sqj I Eiot Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,800 h, Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 8000 rpm Tool taper SK 40 Cgsbevzurfo Hn I Eijt Movement X-Axis Movement 1600 Y-Axis Movement 850 Z-Axis Movement 700 Additional Equipment Tool Magazine: 24-tool This 3-axis FADAL VMC 6535 HT was manufactured in 2005, offering robust capabilities for precision vertical machining. Ideal for technical applications requiring intricate detailing and durability. Consider the opportunity to buy this FADAL VMC 6535 HT vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Alup compressor SCR 30 - height: 125cm - width: 125cm - depth: 75cm - weight: 600kg Good condition fully functional can be inspected and tested on site. Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. Cgsb Hnsfiqp As I Eist The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: good (used), machine/vehicle number: 3348, Year of construction: 2020, lifting height: 18,740 mm, mast type: duplex, operation weight: 41,280 kg, engine type: Diesel, lifting capacity: 9,000 kg, additional equipment features: Dual tread, Manual sliding cabin, Front mud guards, 20-40ft piggy-back spreader, Rear mud guards, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Equipment: lighting, Kalmar DCG90-45ES7 from Uniktruck Cobeunzq Ds Hn I Eiegt

Condition: used, knife sets for a press brake total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) Cgsb Hnjwgppze I Eijt 1 x divisible upper beam 1 x bending block set the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image

Condition: used, This heavy-duty shelving unit, 7 bays, with impact protection, plus 3 side panels, empty, is being auctioned online in our insolvency auction for Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). You can find this and many other items on our platform. Ceb Hewhcp Rsn I Eisgt

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding Cgobstqf Rzs Hn I Eiet 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: excellent (used), Year of construction: 2005, operating hours: 28,000 h, Functionality: fully functional, arm reach: 14,200 mm, load capacity: 30,000 kg, track width: 3,000 mm, net weight: 28,000 kg, number of previous owners: 1, Equipment: cabin, crane, OBX IV crane Power 45KW Cgsb Heu H Hq Ujn I Eist Crane at the front, cab on the left

Year of construction: 1994, Condition: good (used), Ziersch & Baltrusch surface grinding machine - with Formmaster 6 / 30 - with belt filter unit - with coolant unit - width: 250 cm - depth: 200 cm Ceb Hn I Esk Ixl Aeijgt - height: 220 cm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), machine/vehicle number: 3054, Year of construction: 2016, lifting height: 15,100 mm, mast type: telescope, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,740 kg, engine type: Diesel, lifting capacity: 45,000 kg, additional equipment features: Hydraulic sliding cabin, Front mud guards, Rear mud guards, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Cgjb Hneul Dtio I Eijt