Used Eumega Mdv-2 for sale (41,827)

Condition: ready for operation (used), Siemens 1FT5066-0AF01-2 Permanent Magnet Motor, SN:E9G10904371026, the motor was overhauled at Siemens and then stored for a long time, used, normal signs of wear, 100% functional, scope of delivery as per photos Dkjlsi D Sfrsq T Rapol

Condition: excellent (used), Functionality: fully functional, power: 1.8 kW (2.45 HP), fuel type: gasoline, color: yellow, overall weight: 66 kg, Year of construction: 2022, Equipment: UVV, 1x Wacker Neuson BS 60-2 rammer, built in 2021 - 93 operating hours! Weight: 66 kg, 2-stroke WM 80 gasoline engine with 1.8 kW, max. impact rate: 700 rpm. Hour meter Dkolqjwgw I Se T Rapel 1x Wacker Neuson BS 60-2 rammer, built in 2022 - 35 operating hours! Weight: 66 kg, 2-stroke WM 80 gasoline engine with 1.8 kW, max. impact rate: 700 rpm. Hour meter ----- All machines: - New accident prevention regulations and service - Very well-maintained condition - Ready for immediate use and available from stock. Machine location: Warehouse, D-46514 Schermbeck.

Condition: used, axle configuration: 3 axles, loading space volume: 40 m³, first registration: 06/2006, Year of construction: 2006, Equipment: ABS, Fahrzeugausstattung* ABS * Scheibenbremsen Dolq Tjv Ii A Es Rapskl * Werkzeugkasten * Achsentlüftung * Hubachse

Year of construction: 2011, Condition: used, For sale are three used vertical centrifugal free flow pump from Emile Egger Pumpe & Co. AG from the year 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 214050 and T 214050 Year of construction: 2011 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 192cm Quantity: 3 Motor data: Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Number: 186889/0003, 186889/0001H and 186889/0002H kW: 5,5 HP: 7,5 V: 400 A: 10 Dslqoga Drqe T Rapokl 1/min: 1470

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 Dkolq T Rohyumgoapol year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Year of construction: 2021, Condition: ready for operation (used), Boge compressor year 2021 3.64m3/hour, 7.5 bars good condition Dkolqjwg Sdho T Rapsl

Condition: used, mileage: 189,942 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 11/2019, fuel tank capacity: 70 l, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Aug 2019 - May 2020 Model code: T6 Cab: single Technical information Torque: 340 Nm Number of cylinders: 4 Engine capacity: 1.968 cc Transmission: 7 gears, Automatic Dolq T Raevug Tbjpekl Acceleration (0-100 kph): 11,2 s Top speed: 181 km/h Measures length/height: L2H1 Dimensions (LxBxH): 530 x 190 x 199 cm Weights Empty weight: 1.966 kg Carrying capacity: 1.234 kg GVW: 3.200 kg Interior Interior: grey Environment CO2 emission: 208 g/km Consumption Average fuel consumption: 7,1 l/100km (40 MPG) Urban fuel consumption: 8 l/100km (35 MPG) Extra urban fuel consumption: 6,6 l/100km (43 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): New APK (MOT) upon delivery Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options

Condition: excellent (used), Grinder Laska -Model: WW 130-2 -Power: 10/13 kW -Efficiency: up to 5000 kg/h -Capacity: 175 L -Throat diameter: 130 mm -Power supply: 400 V 50 Hz 3N -Dimensions: 1300 x 1160 x 1450 mm -Weight: 535 kg -Quantity in stock: 1 Dkelq Tewidzko Rapsl -Condition: used

Condition: excellent (used), CATALOGUE NUMBER 7567 TECHNICAL DATA - automatic strip feeding - 2 pneumatic clamps - unit angle adjustment - pneumatic spindle movement - simultaneous machining of 2 sections - groove depth up to 25mm - strip supports - adjustment of oscillating drill movement - adjustment of feed stroke - automatic stop - inclination from 90 degrees (vertical) to 0 degrees (horizontal) - main engine 1.1kW Dkolq Tjv H Db Hs Rapol - oscillation engine 0.75kW - working pressure 6-8 bar - dimensions l/w/h 4020x1150x1400mm - weight about 480kg ADVANTAGES - for window production - oscillation - pneumatic clamps - unpainted - Italian production - used machine, very good condition Net price: PLN 13,900 Net price: EUR 3,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2010, Condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 200708 Year of construction: 2010 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 182cm quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Number: 0883082001004H kW: 5,5 Dkslq Togbflue Rapjl V: 400 / 690 A: 11,8 / 6,85 rpm: 1425 For further data see type plate

Condition: like new (used), Year of construction: 2018, operating hours: 1,000 h, Functionality: fully functional, conveyor belt length: 2,520 mm, conveyor belt width: 340 mm, total length: 2,250 mm, L- Ascending conveyor belt with incline and length adjustment device with interface for BASE CONTROL little used 2 pieces available Manufacturer: MB Conveyors Italy Type: N-CPR.2 Year of construction 2018 Dimensions : Horizontal length 720 mm Gradient length 1800 mm Conveyor belt length: 2,520 mm Conveyor belt width: 340 mm Total length: 2,250 mm Adjustable incline angle: from 25 ° to 50 ° degree angle Weight: 70 kg, mobile on castors Condition: super condition little used No damage to the plastic belt detectable Only the usual signs of use without recognizable damage Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and non-removable side guides h 50 mm Standard configuration with central base, complete with gas piston and lockable switch/motor protection + cable and plug Cut and oil-resistant standard conveyor belt with smooth surface made of green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice. Details on the conveyor belt: - PU cover hardness: 92 Shore - Contact temperature: -10 +110 °C Delq Teu H Rc Us Rapjkl - Operating temperature: -10 +90 °C BASE CONTROL - Mushroom impact button - Blue reset button - 2 metal plug-in M12 connectors for the connection of: 2 inputs 2 outputs 24V signal for the sensor connection 1 external mushroom button - LCD display 16x2 + keypad Please also refer to the diagram for the technical dimensions. immediately available in our warehouse Hannover/Germany free loading on the buyer's transporter or free delivery against freight reimbursement

Condition: excellent (used), CATALOGUE NUMBER 6051 TECHNICAL DATA - width of the pulling belt 1300mm - max width of the processed element 1250mm - max height of the processed element 60mm brush units: Dslji Dawasq T Rapekl - 2 rollers with brushes: 1 for aging, 1 for polishing - brush diameter 260/300mm - brush length 1250mm - brush spindle diameter 32mm - brush motors 2×2.6kW - reducer motors (servomotors) 2×0.55kW - brushing roller speed 300-1000rpm - brush blowing - electric grinding height adjustment brush oscillation: - brush oscillation/stroke - range 45mm - pulling belt feed 1.5-7.5m/min - belt pulling motor 0.75kW - belt blowing 0.75kW - vacuum pump 7.5kW - compressed air 6 bar - diameter of the exhaust port 120, 160, 220, 310mm - dimensions L/W/H 2060x2000x2050mm - weight about 2000kg ADVANTAGES - French production - unpainted - equipped with 1 steel wire head for aging - giving structure to wood and 1 grinding wheel for grinding, polishing in wood - vacuum pump - servo motors - possibility of setting the speed of each brush separately - used grinder, very good condition Net price: PLN 29,900 Net price: EUR 7,030 depending on the price, 4.25 euros (Prices may vary with higher fluctuations)

Year of construction: 2010, Condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Number: T 202000 Year of manufacture: 2010 L/s: 2,77 1/min: 2390 m: 26,5 Connections: DN50 and DN65 length: 192cm Quantity: 1 Djlq Tegbflms Rapekl Motor: Manufacturer: VEM motors GmbH Year of construction: 07/2010 Type: K21R 160M 2 FD TWS HW Number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 For further data see type plate

Condition: excellent (used), CATALOGUE NUMBER 7619 TECHNICAL DATA - max. width of the processed element 1000mm - max. height of the processed element 160mm - 2 units: Dkolq Tjwbdi Ss Rapsl 1) grooved rubber roller for calibration 15kW 2) two metal rollers + 8kW shoe - from above: - 2 divided plastic rollers, sliding - 2 metal rollers, sliding - pressure - I unit - pressure - metal roller, sliding - pressure - II unit - pressure with rubber roller, sliding - cleaning brush - metal roller, sliding - from below: - rubber roller, sliding - pulling tape - rubber sliding roller - pneumatic belt oscillation on photocells - lifting electric table - grinding thickness potentiometer - 2 types of feed speed - working pressure 8-10bar - diameter of the exhaust port 2x100mm, 1x120mm, 3x180mm - overall dimensions length/width/height 2020x1720x2080mm - weight 1965kg ADVANTAGES - Italian production - 2 aggregates - unpainted - used grinder, very good condition Net price: PLN 24900 Net price: EUR 5860 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz Dkjlou Rnzijq T Rapol The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: used, Technical data / dimensions Available quantity: 2 Volume: approx. 110,000 liters Container type: silo Condition: used Food safe: no Design: upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 15,600 mm Total height: approx. 18,000 mm Weight: approx. 2700 kg Specific weight of the medium: 0.6 to/m³ Operating pressure: pressureless Ground clearance: approx. 1,000 mm Material / properties Inner casing material: aluminum Notes: Material: AlMg3 / AlMgSi Dkslq T Rajv Avttopol Equipment The mixing tube installed in the middle of the container cylinder ensures smooth mixing of the stored medium Stand shape: foot ring / stand frame Fastening: fixed Top base type: conical base Slope: approx. 15 % Bottom type: cone Cone inclination: 90 degrees Top floor: 1 x roof edge railing, height: 1,200 mm 2 x crane eye 1 x flange connection DN 80 (filling) 1 x flange connection for silo pilot 1 x vent 1 x agitator for mixer Various connections for measurement and control technology Case: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection pipe 1 x filling line DN 80 8 x pipe holder Bottom floor: The silos end at the bottom in a 90° cone with flange

Condition: used, Aluminum silo with long upright frame Technical data / dimensions Available quantity: 2 Volume: approx. 105,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Inner diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Dkelq Tjtxitcs Rapjl Specific weight of the medium: 0.6 to/m³ Operating pressure: unpressurized Material / composition Inner jacket material: Aluminum Features Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Gradient: approx. 15 degrees Bottom floor type: Cone Cone inclination: 60 degrees Top floor: 2 x crane eyes 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (Silopilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Jacket: 2 x flange DN 32 (Min-Max detector) 1 x filling line, leading into the silo at the top, ending in TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection pipe Notes: - The silos end at the bottom in a 60° cone with flange and extraction box. - One of the two silos has a dust filter. - Some of the silos have visual defects (brown discoloration, various holes for cable ducts in the standing frame), but these do not affect the function of the silos The currently connected measurement and control technology is included. However, no guarantee is given for their function!

Condition: good (used), Year of construction: 2001, 2 x wheat beer fermentation tanks with a net capacity of 14,600 liters Technical data / dimensions: Available quantity: 2 Volume: approx. 14,600 liters (gross volume approx. 19,000 liters) Type of container: wheat beer fermentation tank Condition: used Delq T Rajvn Ihtjpskl Suitable for food: yes Design: upright External diameter: approx. 2600 mm Cylindrical height: approx. 4100 mm Total height: approx. 4700 mm Operating pressure: pressureless Ground clearance: approx. 500 mm Operating temperature: + 20 degrees Celsius Manufacturer: Gresser Behälterbau Year of construction 2001 Material/condition: Inner casing material: V2A (1.4301) Cooling: External cooling coils Cooling medium: glycol Operating pressure: + 2.0 bar The containers have a gross capacity of around 19,000 litres and a net capacity of around 14,600 litres. The difference is due to the "overflow spout" (see drawing) The platform and the cleaning gate are also offered

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Dkjlq T Rasty Tidjpol Features Stand shape: Feet Number: 4 Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 Djlq T Rjvmidysapjkl 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos

Condition: excellent (used), 2 x 55 m³ aluminum silos with long support frame, ø 3,000 mm Capacity: approx. 55,000 liters Manufacturer: Zeppelin Year of construction: 2002 Quantity: 2 Diameter: approx. 3,000 mm Cyl. Height: approx. 10,000 mm Total height: approx. 11,125 mm Dolq T Raswg Dd Hspskl Weight: approx. 1,500 kg Bulk density: 1.0 kg/dm³ Material: AlMg3 Connections and joints: On the top floor: 1 x roof edge railing (ø 3,000 x 1,250 mm) 2 x crane eyelets 1 x manhole opening DN 600 1 x flange DN 150 1 x flange DN 100 (filling nozzle) 1 x thread 1 1/2" (level indicator) 1 x emergency shut-off valve DN 200 Inside the shell: 1 x filling line 1 x access door One of the silos has a two-section ladder with safety guard. The silo ends in a 90° cone with a flange DN 200 with Gate valves. Both silos were completely overhauled in 2021/2022.

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: Dslq T Rowdr Tweapjkl 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: used, Two Ystral jet stream agitators are for sale Data on the agitator: RpM: 1465 V: 230 / 400 Dsloga D I Ujq T Rapjkl kW: 11 shaft length: 560mm Total length: 1220mm Blade diameter: 360mm For more information see data sheet

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Djlq Tjwfrgys Rapekl Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: good (used), Year of construction: 2016, The pressure tank consists of a cylindrical shell, standing on three tubular feet. The shell is insulated and clad on the outside with marbled stainless steel. The jacket can be cooled with a glycol-water mixture. Various connections and flange nozzles available (without agitator) Year of construction: 2016 Tank volume: 4,000 liters Max. Tank pressure: 6 bar Test pressure 9 bar Opening pressure safety valve: 6 bar Temperature min./max.: -5°C / + 30 °C Material: V2A stainless steel (1.4301-AISI 304) Double jacket specifications: Max. operating pressure: 2.1 bar Test pressure: 3 bar Capacity: 16 liters Temperature min./max.: -5°C / + 30 °C Operating medium: Glycol-water mixture Various connections and lines on the tank shell (e.g. CIP line, filling line) Drain drawn to the front with disk valve in the tank base Flange connection for agitator (agitator not included) Dsljvfpcmoq T Rapokl