Used Ingersoll Rand 12/235 for sale (138)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. Bwsbvdpsvwa Nbjgasl

Condition: used, End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 Bebvdemydnkepgaowl -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Bwebvdportrx Rogaol Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 Refurbished Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Bobjv Avg Tjvdpgaewl Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer Accessories: CO2 fire extinguishing system, integrated cartridge filter system Refurbished

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 2010 mm Measurements depth 1234 mm Measurements height 2550 mm Machine weight 4000 kg Main Drive Spindle motor power 16 kVA Additional Equipment Load Capacity for Automatic Electrode Change: 15 kg Bwjbvswgf Elsdpgajl This 3-axis OPS INGERSOLL Eagle 400 die-sinking EDM machine was manufactured in 2007. Ideal for precise metal removal processes, it offers robust construction and reliable performance. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Eagle 400 machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, 5-Axis CNC HSC Vertical Machining Centre with Pallet pool OPS Ingersoll Speed Hawk 650 Year 2009 Andronic 2060 control Proposal Number MV-6444 Pallet size 320 x 320 mm X 550 mm Y 700 mm Z 450 mm 4th axis table rotation axis C 360° 5th axis table swivel axis A -120°/+60° 56 tool magazine positions 36000 rpm. Equipped with: Pallet pool with 5 EROWA pallets 320 x 320 mm. Fischer HF spindle. Glass scales in X,Y,Z Bjbevy H Hrevdpgaewl …and much more Proposal reference MV-6444

Condition: used, Year of construction: 2012, Diesinking / EDM Travel distance X: 525 mm Travel distanceY :400 mm Travel distance z: 450 mm table size X: 750 mm Bwobvdpjv Ak Ufsgasl table size Y: 650 mm max. workpiece weight: 1000 kg electrode changer: 20 - time C-axis generator: 60 Ampere drop tank

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system with tool changer are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine does not have its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Bjbstdkk Aovdpgaswl Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2010, operating hours: 12,380 h, 5-axis CNC milling machine OPS Ingersoll Speed Hawk Bwobvdpgowdwrreasl Year of manufacture: 2010 Operating hours: 12,380 h Travel paths (x|y|z): 550 | 400 | 400 mm Spindle speed: maximum 42,000 rpm The machine is being discontinued due to discontinuation of spark erosion electrode production. Location: Southern Germany Video from April 23, 2025 attached via YouTube. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the pictures shown. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to businesses and without warranty.

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, distance table to quill: 585 mm, worktable length: 1,000 mm, worktable width: 760 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Bjbev Sqz Rjvdpgaswl Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2800 mm Measurements depth 2020 mm Measurements height 2450 mm Machine weight 8200 kg Control Unit Bwebvdeudd D Rjpgaol Brand Heidenhain Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 1-42000 rpm Spindle motor power 15 kW Tool taper HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm B-Axis Movement -120°/+60° C-Axis Movement 40 rpm Table Outer length 650 Outer width 500 Tslots size 5 x 14H12 Number of tslots 100 Table load 500 kg Additional Equipment Tool Magazine Capacity: 100 positions This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre. Application Types Milling

Condition: excellent (used), Screw compressor KSK GHH RAND machine after service on a 120L tank Technical data: Bwsbvdpgewc Sipoajl capacity 0.45 m3/min (450 L/min); 4 KW engine; pressure. 10 bar compressor fully operational; net price: 4200 PLN gross price: 5166 PLN

Condition: ready for operation (used), Year of construction: 1990, operating hours: 2,343 h, Functionality: fully functional, machine/vehicle number: 51065506-2, nominal power (apparent): 2,125 kVA, Equipment: documentation/manual, TECHNICAL DETAILS Rated power: 2,125 kVA Generator Manufacturer: Piller Type: NKT 2150-4 Voltage: 400/231 V Frequency: 50 Hz Power: 2,125 kVA Insulation class: F Protection type: IP23 Power factor: 0.8 Speed: 1,500 rpm Bwobvdpgsv Tmd Reasl Current consumption: 3,967 A Turbine Manufacturer: Dresser-Rand Model: KG2-SL3 Rated speed: 1,500 rpm Peak load power: 1,890 kW MACHINE DETAILS Voltage for generator connection: 380 V Transport weight: 10,000 kg

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Bwobvdpgotdkkuoasl Both machines are loaded via Erowa Automation, this machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 26588, Y.O.M - 1992 / RETROFITTED & OVERHAULED IN 2015 X-AXIS TRAVEL(TABLE TRAVEL) - 9,550mm Y-AXIS TRAVEL(CROSS TRAVEL) - 5,867mm Z-AXIS TRAVEL(VERTICAL TRAVEL) - 990mm W-AXIS TRAVEL(CROSS RAIL TRAVEL) - 2,448mm C-AXIS TRAVEL(MASTERHEAD DRUM) - 360 Degrees PALLET SIZE - 10,000mm x 3,479mm PALLET LOAD CAPACITY - 44,000 LBS MAX. DISTANCE UNDER HEAD - 4,425mm MAX. DISTANCE BETWEEN COLUMNS - 3,886mm MAIN SPINDLE DRIVE - 125HP Bwobvdewc H T Nopgasl EQUIPPED WITH : FANUC 31i - MODEL A DUAL PALLET CHANGER MASTERHEAD RAM AUTOMATIC HEAD CHANGER / 5EA (1)RIGHT ANGLE 2500 RPM HEAD (2)RIGHT ANGLE 625 RPM HEAD (3)RIGHT ANGLE FLY CUTTER 417 RPM HEAD (4)STRAIGHT 2500 RPM HEAD (5)STRAIGHT 625 RPM HEAD 154 TOOL ATC THROUGH THE SPINDLE COOLANT RENISHAW PROBE CAPACITY APPROX. OVERALL DIMENSIONS - 22,809mm x 13,589mm x 7,684mm

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Bsbsu Tdm Dsvdpgajwl Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps (60 amp peak current) High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Year of construction: 2001, Condition: ready for operation (used), Control Unit Model 64 bit CNC Brand MITSUBISHI Movement X-Axis Movement 550 mm Y-Axis Movement 850 mm Z-Axis Movement 450 mm Additional Equipment Handling system: IMC 5 - EROWA UPS electrode changer with 84-fold pick-up Workpiece changer: 8-fold pallet Integrated cartridge filter system CO2 fire extinguishing system Bwsbvdjv Ihknjpgajl This OPS INGERSOLL Gantry 8000 was manufactured in 2001. A robust die-sinking EDM machine featuring a Mitsubishi 64-bit CNC for precise control. It includes an IMC 5 - EROWA UPS electrode changer with an 84-fold pick-up and an 8-fold pallet workpiece changer. The machine supports a load capacity of 2,000 kg and has a work bowl size of 800 x 1,100 x 480 mm. For more information about this die-sinking EDM machine, please reach out to us. Application Types EDM

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm Bsbvdpget Dbaksaewl work bowl : 1000 mm X1600 mm X 550 mm Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: used, Year of construction: 1998, table length 730 mm table width 630 mm ampere ? ( 70 ) A total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m Bwobovw D Dvsvdpgaol

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg Bjbvsq Su Hnsdpgaswl The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 26588, INGERSOLL_5-AXIS PLANO MILLER TYPE DOUBLE COLUMN VMC - USED MACHINE X-AXIS TRAVEL(Table Travel) - 9550mm Y-AXIS TRAVEL(Cross Travel) - 5867mm Z-AXIS TRAVEL(Vertical Travel) - 990mm W-AXIS TRAVEL(Cross Rail Travel) - 2448mm C-AXIS TRAVEL(MNasterhead Drum) - 360 degrees Pallet Size - 10,000mm x 3,479mm Bobvdpgewbf T Sjajwl Pallet Load Capacity - 44,000 LBS

Condition: refurbished (used), Year of construction: 2013, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Bwsbvsv Icfyodpgajl Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can Bwebvdpjvwgmgegasl be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, Year of construction: 2019, OPS Ingersoll High Speed Eagle V 9 / 5 axes with automation, Year of manufacture 2019, Control Heidenhain iTNC 640, Travel path X/Y/Z 800/600/500 mm, 2 axes swivel - rotary table, C axis 360°, B axis -60° / +140°, Bwsbvdpgsv Hnizjajl Spindle speed up to 36,000 rpm, IKZ, 15 KW drive power, Table clamping area Ø 600 mm, Ww 72x, HSK E 50, Extraction, Chip conveyor, Laser measurement, 3D measuring probe, Erowa table clamping system,

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 completely overhauled Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer, 20-way plate changer also available on request Accessories: CO2 fire extinguishing system, integrated cartridge filter system Bwebvjvmglbsdpgasl Generally overhauled