Used Mc Cormick Mtx 185 for sale (6,114)

Condition: used, Year of construction: 2009, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Siemens ergoline table surface area 2x 790 x 560 mm number of pallets 2 rapid traverse 30 m/min turning speed range 8000 U/min Deb Hotxctvjcd R Hout power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight 5,2 t dimensions 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, Used coordinate measuring machine Karl Zeiss CMM CONTURA 7/10/6 active Year of manufacture 2002 Duob Hevzltgecd R Het Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Technical description in PDF The machine was brought up to date when purchased in 2017, CMG overhauled, control panel retrofitted (not standard for this year of manufacture) Control: Calypso 2019 The machine was serviced and maintained annually with the maintenance/service contract, then re-measured with a test sticker! The machine is still powered and can be viewed in the Wels area in Austria by arrangement. The buyer takes care of transport. Technical data, accessories and description of the machine are non-binding

Condition: good (used), Year of construction: 1995, Mori Seiki ZL 15 SMC, Deb Hcd Rev Uw Dwj Hout built in 1995, MSC 516 control, 1 12-station turret, 2 6-station turrets, driven tools on turret 1, C-axis, spindle speed up to 3,000 rpm, chip conveyor, collet chuck, 2 three-jaw chucks, rigid holders, driven tool holders,

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding Djb Het Dmlfjcd R Hout

Condition: excellent (used), Year of construction: 2020, lifting height: 1,540 mm, fuel type: electric, mast type: duplex, battery capacity: 69 Ah, battery voltage: 24 V, fork length: 1,150 mm, Field of application: Internal logistics Lifting capacity: 1.000 kg Technical condition: very good Duobewagdij Hcd R Hst Visual appearance: very good Serial number: 90613353 Please contact PEDRO GÓMEZ for more information

Year of construction: 2000, Condition: ready for operation (used), General Data Machine weight 5850 kg Control Unit Brand FANUC Main Drive Number of spindles 2 Spindle speed range 4000 rpm Spindle motor power 7.5/11 kW Spindle bore 65/51 Turret Number of turrets 2 Number of tool slots 12+8 Rotating tools Yes Media Chip conveyor Yes Additional Equipment Dob Hovxxkmecd R Heut Bar feeder + set of tool holders included This MORI SEIKI ZL-200 SMC was manufactured in 2000. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,000 h, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C-axis) and swivel head (B-axis) TECHNICAL DETAILS X-travel: 760 mm Y-travel: 560 mm Z-travel: 560 mm Control: Siemens 840 D Powerline Tool holder: SK 40 Number of tool positions in the magazine: 60 Spindle speed: 0-12,000 rpm Pallet size: 630 x 500 mm Infinitely variable feed: 20-15,000 mm/min Rapid traverse: 50 m/min Dujb Hov T U U Rscd R Het MACHINE DETAILS Machine weight: approx. 12 t Space required: approx. 5.2 x 4.5 x 2.45 m Connected load: 64.2 kVA Total power requirement: 26 kW EQUIPMENT - Rotary table - Swiveling head - Pallet changer with 2 pallets - Tool changer with 60 positions

Condition: good (used), mileage: 585,399 km, power: 158 kW (214.82 HP), first registration: 12/2017, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 245/70 R19.5, fuel: diesel, wheelbase: 5,900 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 7,840 mm, loading space height: 2,630 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, differential lock, soot filter, spoiler, tail-lift, = Other options and accessories = - AEB - Aluminium fuel tank - Roof spoiler - Differential lock - EBS - Electric windows - Speed limiter - Hardwood floor - Air suspension - Particle filter - Radio/CD player - Disc brake - Side door - Sunshade - Lane assistant - Toolbox - Central locking = Remarks = EURO 6, RENAULT D 210.12 WITH 7.85 LONG LUGGAGE! MEDIUM LENGTH CAB WITH SPOILER, SUN VISOR, AUTOMATIC TRANSMISSION, ENGINE BRAKE, AIR CONDITIONING, CRUISE CONTROL, LEATHER STEERING WHEEL, LANE ASSIST, EMERGENCY BRAKE ASSIST, 1X ALUMINUM DIESEL TANK, ALUMINUM BOX BODY WITH DHOLLANDIA 2000KG LIFT AND OWN BATTERIES, SIDE DOOR, HARDWOOD FLOOR, STAINLESS STEEL STORAGE BOX, DUTCH LETTER = More information = Technical information Number of cylinders: 4 Engine displacement: 5,132 cc Deb Hov T Rf Escd R Hout Drivetrain AdBlue system: Yes Axle configuration Tire size: 245/70 R19.5 Brakes: Disc brakes Front axle: Max. axle load: 4480 kg; Steered; Suspension: leaf springs Rear axle: double tires; differential lock; max. axle load: 8480 kg; suspension: air suspension Dimensions Dimensions (L x W): 990 x 255 cm Weights Empty weight: 8,115 kg Payload: 3,885 kg GVW: 12,000 kg Functional Tail lift: DHOLLANDIA DHLM.30, tailgate, 2000 kg Condition Technical condition: good Visual condition: good Damage: none Identification License plate: 06-BKG-3 = Company information = Gast Trucks Venlo B.V. | Up to 30 pictures and a video on Since 1998 we have specialized in the purchase, sale, import and export of used commercial vehicles. Location Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL) Transport and export papers / license plates possible for an additional charge to ports in the Netherlands, Belgium or Germany. Reservations without a deposit are not possible!

Condition: excellent (used), Year of construction: 2002, operating hours: 69,000 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 69 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840D powerline, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 800 mm, table load: 800 kg, overall weight: 10,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,000 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance Dujb Hcdov Eurmo R Het + Transport and commissioning can be offered separately

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 192822115, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 12,000rpm Maximum spindle torque 261Nm Spindle motor 35kW Rapid feed rate X, Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm) Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity Maximum tool length Tool to tool time Chip to chip time 30 tools 300mm Dujb Hcd Rsv Ak Hbs Hot 1.5 sec 2.3 sec Approx. weight 9000kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control system with Shop Mill Linear scales Through spindle coolant, 20 Bar Oil skimmer Swarf Conveyor Renishaw HPRA toolsetting arm LNS mist extraction 14 off BT40 toolholders Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2002, x-travel 640 mm y-travel 600 mm z-travel 500 mm Control Siemens Shopmill weight of the machine ca. 9 t dimensions of the machine ca. 5*6*3 m Djbsvmtuie Hcd R Hout Very good original condition from school operation Only approx. 3100 program hours !

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Movement X-Axis Movement 6000 Y-Axis Movement 2000 Z-Axis Movement 1200 This 5-axis PROMAC ETESIAN HMC. A PORTALE was manufactured in 2010, ideal for complex and precise gantry milling applications. Consider the opportunity to buy this PROMAC ETESIAN HMC. A PORTALE gantry milling machine. Contact us for more information. Dusb Hcdsv Rr R Rs R Het Application Types Milling

Year of construction: 2013, Condition: used, General information Year of manufacture: 2013 New: No Model year: 2013 Colour: Grey Type number: VF624GPA000072000 Serial number: VF624GPA000072000 Technical information Part suitable for: trucks Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Pedro or Arie for more information Duebou Tq Ihj Hcd R Hjt

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 150 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 630 mm, Hartford HCMC 1270 machining center Working area: X-axis, longitudinal: 1,270mm Y-axis, transverse: 650mm Z-axis, vertical: 630mm Spindle: SK50/ 25kW / 644Nm / 6,000rpm Tool changer: 32-way Control: Heidenhain TNC640 Equipment: IKZ 20 bar, external coolant supply Dusbouxa Ece Hcd R Het Chip conveyor in hinged belt design, chip flushing, flushing gun, compressed air gun, machine light, closed work area, electronic handwheel, CE standard The attached YouTube video shows a comparable machine - Hartford HCMC1682. This machine is slightly larger in comparison and has 979Nm spindle power instead of 644Nm. The structure of the machine is identical, however.

Condition: excellent (used), Year of construction: 2005, operating hours: 41,000 h, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D powerline, workpiece weight (max.): 600 kg, total height: 2,700 mm, total length: 3,500 mm, total width: 4,000 mm, table width: 790 mm, table length: 560 mm, table load: 800 kg, overall weight: 4,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 11,000 h, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMGMORI DMC635V Year of manufacture: 2005 Operating hours: 41,000h Spindle hours: 11,000h Functionally tested and cleaned Deb Hcov Euqcjd R Hout Maintenance carried out according to manufacturer's specifications (all wearing parts replaced) Viewing windows replaced Conversion to LED machine lights Geometrically within new machine tolerance, tested and fully functional. Equipment: Rotating viewing window Chip conveyor Coolant device Internal coolant supply Signal light Tool changer 30 pos.

Condition: used, mileage: 192,750 km, power: 132 kW (179.47 HP), first registration: 10/2011, overall weight: 11,990 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 5,910 kg, empty load weight: 6,080 kg, tire size: 245/70R17,5, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, crane, low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, registration number house, 1x air seat, double bench seat, rear window, electric mirror, heated mirror, electric window left, electric window right, switch 6, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, rotating beacon, leaf suspension, noise reduction G1, U-protection, lateral aluminum driving protection, hydr. cross-locking, crane behind house, emergency stop, foldable, 2-point support hydr, 2x hydr. extensions, green environmental sticker Wheelbase: 3900 mm Body: 7t Technocar roll-off system type TNH 7 for city containers up to 4m & crane Amco Veba 807N2S Gearbox ZF 6S-800 OD, MAN BrakeMatic, C-cab, double bench seat. Swivel head steering! Load diagram: 2.5m-2740kg, 4m-1720kg, 5.56m-1210kg, 7.12m-935kg! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dob Hcovhilaed R Hsut - .

Condition: excellent (used), Year of construction: 1991, cutting width (max.): 1,550 mm, Equipment: safety light barrier, Polar 155 EMC-MON – age 1991 Equipped with: right Polar lift Dusb Hcovwakxed R Hst RB7 jogger (no air removal) chrome air table photocells 3 knives

Year of construction: 1995, operating hours: 37,864 h, Condition: ready for operation (used), General Data Measurements width 1410 Measurements depth 2195 Measurements height 1690 Machine weight 3600 Control Unit Brand FANUC Model MSD 516 II Main Drive Spindle speed range 5000 Spindle motor power 11 kW Movement X-Axis Movement 135 mm X-Axis Rapid Traverse 18000 mm/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 24000 mm/min Workpiece Workpiece drm over bed 450 mm Workpiece drm over support 300 mm Workpiece drm 210 mm Workpiece X 300 mm This MORI SEIKI SL-15MC was manufactured in 1995. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information. Dujb Hcevz Iuted R Hot Application Types Turning

Condition: used, mileage: 956 km, power: 302 kW (410.61 HP), fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,750 mm, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 6,370 mm, loading space height: 1,130 mm, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, retarder, = Additional Options and Accessories = - AdBlue System - Electrically Folding Exterior Mirrors - Electric Windows - Hydraulic Tilt Duebsv Twwze Hcd R Hst - Lift Axle - Engine Brake - PTO - Radio - Disc Brakes - Limited-Slip Differential - Spotlights - Toolbox = Remarks = Unused Truck Scania P410 6x2*4 Lift and Steering Axle Spring Suspension Front Air Suspension Rear Retarder Palfinger Crane: Type: PK 350.002 tec Scanreco Radio Remote Control 4 x Hydraulic Outriggers 6 x Hydraulic Extensions Winch 4.60 mtr - 6,600 kg 6.40 mtr - 4,500 kg 8.30 mtr - 3,300 kg 10.30 mtr - 2,550 kg. 12.50 mtr - 2,050 kg. 14.60 mtr - 1,700 kg. 16.90 mtr - 1,460 kg. Loading box: Twist locks. 14 x lash eyes. Dimensions: 637 x 250 cm. Loading height: 113 cm. Removable aluminum boards 50 cm. = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Left tire profile: 100%; Right tire profile: 100%; Suspension: Leaf springs Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left inner tire profile: 100%; Left outer tire profile: 100%; Right inner tire profile: 100%; Right outer tire profile: 100%; Suspension: Air suspension Rear axle 2: Tire size: 385/65R22.5; Steered; Left inner tire profile: 100%; Right outer tire profile: 100%; Suspension: Air suspension Weights Empty weight: 16,334 kg Payload: 9,666 kg GVW: 26,000 kg Functional Crane: Palfinger Identification Type number: P410 6x2*4 / PALFINGER 35 tm CRA = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We make every effort to provide correct information, but no rights can be derived from the posted texts.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinumerik 810D, rotational speed (max.): 12,000 rpm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, Vertical machining center Deckel Maho DMC 63V Year of manufacture: 2002 Control: Sinumerik 810D Technical data: Spindle speed: 10 - 12,000min-1 Dusb Hjv Hrkiecd R Hjt Drive power: 13KW Tool holder: SK 40 IKZ: 20bar Travel paths: X-axis: 630mm Y-axis: 500mm Z-axis: 500mm Accessories: Chip conveyor IKZ belt filter system

Condition: good (used), Stop for press brake, bending machine, guillotine shears ..., cross table -Stop: for press brake, bending machine, guillotine shears ... cross table -Hole: Ø 60 mm / bolt circle 75 mm M6 -Dimensions: see photos -Dimensions: 630/190/H185 mm -Weight: 8.8 kg Dueb Hcdsv Eapds R Hot

Condition: ready for operation (used), Year of construction: 2004, operating hours: 3,569 h, Functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 810D powerline, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-travel: 1,040 mm Dob Hcd Rowaat Ro Hout Y-travel: 600 mm Z-travel: 500 mm Control: Siemens Sinumerik 810D powerline Feed Feed rate: 1 – 40,000 mm/min Rapid traverse: X-axis: 70 m/min, Y/Z-axis: 40 m/min Spindle Speed range: continuously variable up to 12,000 rpm Spindle mount: SK 40 / DIN 69871 A Tool and table Tool turret: 30 positions Table clamping area: 1,250 x 600 mm Max. table load: 800 kg MACHINE DETAILS Machine dimensions: 3,600 x 2,800 x 3,200 mm Machine weight: approx. 8.0 t Machine hours ON: 80,391 h Machine hours spindle: 35,695 h EQUIPMENT - 3D measuring probe - Internal cooling system - Chip conveyor - Tool measurement Transport available upon request

Condition: good (used), Year of construction: 2000, Bridgeport VMC 1000 Yom 2000 Heidenhain TNC 426/430 Dujb Hcev Tv Ryjd R Hjt X-1000, Y-510, Z-510 BT 40 Tool changer 30x Including 4th/5th axis Good running! Video available.

Year of construction: 2000, Condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Deb Hov Uqb Nocd R Hjut

Condition: used, mileage: 296,995 km, power: 390 kW (530.25 HP), fuel type: diesel, color: white, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,460 mm, loading space length: 6,400 mm, loading space height: 1,230 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - AdBlue System - Alarm System - Differential Lock - Electric Windows - Remote Central Locking - Refrigerator - Lifting Axle Djb Hcjv Twk Usd R Heut - Hub Reduction - PTO - Radio - Rear View Camera - Disc Brakes - Heated Seats - Sun Visor - Spotlights - Auxiliary Heating - Toolbox = Remarks = Mercedes-Benz Arocs. 8x4-4 with lift and steering axle. HMF 5020 K6 Fly jib: FJ1000-K5 4 x hydraulic outriggers. Scanreco radio remote control. 4.70 mtr - 9,270 kg. 6.40 mtr - 6,460 kg. 8.30 mtr - 4,780 kg. 10.30 mtr - 3,700 kg. 12.30 mtr - 3,000 kg. 14.40 mtr - 2,500 kg. 16.70 mtr - 2,150 kg. Fly jib: Hydraulic reach: 28.5 mtr - 575 kg. Hydraulic extendable loading platform = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Left tire profile: 40%; Right tire profile: 40%; Suspension: Leaf spring Rear axle 1: Tire size: 295/80R22.5; Twin tires; Left tire profile: 80%; Left tire profile: 80%; Tire profile inside right: 80%; Tire profile outside right: 80%; Suspension: Air suspension Rear axle 2: Tire size: 295/80R22.5; Dual tires; Tire profile inside left: 80%; Tire profile outside left: 80%; Tire profile inside right: 80%; Tire profile outside right: 80%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: Air suspension Dimensions Dimensions (L x W): 1060 x 255 cm Weights Empty weight: 20,835 kg Payload: 14,665 kg GVW: 35,500 kg Functional Crane: HMF Maintenance APK (General Technical Inspection): inspected until December 2025 Identification Type number: AROCS 2553 / 8X4-4 / HMF 50TM CR = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We make every effort to provide correct information, but no rights can be derived from the posted texts.