Used Glob-Ram Rm733S Sorteergrijper for sale (22,702)

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 Cgolqehuf Itjy Ng Eot -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition Cgslqjfnabyjy Ng Ejt

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Cgjlqetunbuoy Ng Eet Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Chain width: 17 mm Motor: 2.2 kW

Condition: used, Year of construction: 2022, load capacity: 1,000 kg, lifting height: 715 mm, construction height: 1,250 mm, fork length: 1,150 mm, total length: 1,526 mm, drive type: Handbetrieb, construction width: 540 mm, net weight: 104 kg, Scissor lift truck Fork width: 160 mm Fork thickness: 48 mm Technical condition: New Front tires type: Solid rubber Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Condition: 80 - 100% Cgjlqy Nerf Ik Tog Ejt

Year of construction: 2008, Condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Cgelopyhdteqy Ng Eot

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C / 095-A-0 three-phase servo motor SN: 14432,used, normal signs of wear, 100% functional, scope of delivery as per photos Cjlqysu I Nnrs Ng Ejgt

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Indramat: CLM 01.3-X-0-2-B module -Item: 245551-07026 Cgolqy Nefg Al Deg Est -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 6.2 kg/piece

Condition: used, Functionality: fully functional, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 115 mm, construction height: 1,250 mm, fork length: 950 mm, total length: 1,350 mm, drive type: Handbetrieb, construction width: 525 mm, net weight: 59 kg, Hand pallet truck Fork width: 150 mm Fork thickness: 55 mm Technical condition: New Cgjlou D S T Asqy Ng Est Front tires type: Solid rubber Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100%

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 Permanent magnet three-phase servo motor SN: 15855,used, minor signs of wear, 100% functional, scope of delivery as per photos Cgjlsu H Slksqy Ng Eet

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor, asynchronous main drive motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Indramat, permanent magnet three-phase servo motor -Type: MAC090C-O-GD-2-C / 110-AO / S001 -Speed: 3000 rpm Cjlqsgz Tkmjy Ng Eogt -Shaft: Ø 24 x 50 mm -Dimensions: 455/140 / H195 mm -Weight: 22 kg

Condition: used, Functionality: fully functional, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 115 mm, construction height: 1,250 mm, fork length: 1,500 mm, total length: 1,900 mm, drive type: Handbetrieb, construction width: 525 mm, net weight: 112 kg, Hand pallet truck Fork width: 150 mm Fork thickness: 55 mm Cgslqy Ngeu D S Tvs Ejt Technical condition: New Front tires type: Solid rubber Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100%

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 permanent magnet three-phase servo motor SN:16910 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Cgolqspw D Hajy Ng Ejt

Year of construction: 1983, Condition: used, PLC control, machine control, module -Product number: 1125 -Serial number: 109-178-4201 -Dimensions: 190/130/H30 mm Cgelqyjd I Daye Ng Ejt -Weight: 300 g

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 115 mm, construction height: 1,160 mm, fork length: 1,800 mm, total length: 2,200 mm, drive type: Handbetrieb, construction width: 525 mm, net weight: 127 kg, Hand pallet truck Fork width: 150 mm Fork thickness: 55 mm Technical condition: New Front tires type: Solid rubber Front tires Condition: 80 - 100% Csleu D S Tceqy Ng Eogt Rear tires Type: Vulkollan Rear tires Condition: 80 - 100%

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 Permanent magnet three-phase servo motor SN:43146,used, minor signs of wear, 100% functional, scope of delivery as per photos Cjlqoq N Ufdey Ng Eegt

Condition: used, Control amplifier, servo motor control Cjlqy Ngjdpg Tzs Ejgt -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 Permanent magnet three-phase servo motor SN:42439,used, normal signs of wear, 100% functional, scope of delivery as per photos Cgjlqsq N Ufasy Ng Eot

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve Cjlohuf Ihsqy Ng Eogt -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

Condition: ready for operation (used), Indramat MDC9.20B/MMA-0 Permanent magnet motor SN:2011R1 ,used, strong signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cslqy Ngsur Da As Ejgt

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Rexroth / Indramat, the motor comes from the Werner TC 2.6K machining center -Type: MAC112A-0-LD-2HC / 130-A-1 Cgolqy Ngsgz Ti No Ejt -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Brake: 14 Nm -Dimensions: 385/192 / H240 mm -Weight: 26 kg

Year of construction: 1983, Condition: used, PLC control, machine control, module -Number: 3x available -Price: per piece Celsd Tn Dfsqy Ng Ejgt -Dimensions: 190/130/H20 mm -Weight: 200 g

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available Cgjleg Ehakjqy Ng Est -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg

Condition: used, Control amplifier, servo motor control Cslob A N D Tjqy Ng Esgt -ETT 10/2x160 V -9.0 V/1500 -Weight: 12 kg

Condition: used, Control amplifier, servo motor control, programming module -MDC 9.20B Cgjlqeb I Thujy Ng Eet -10V/1500 -Number: 1x controls available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

Condition: used, Milling tool holder arbor -Recording: PK50 -Mill: Ø 32 mm -Weight: 7 kg Cgjlqeb A R Htoy Ng Ejt