Used Fordson Super Dexta 3000 for sale (10,808)

Year of construction: 2014, Condition: like new (used), SimasV Horizontal bender as new Dsb Hhw Hopl T Dqjwscg Type: SIMASV SUPER T40 DIGIT 1P Pressing force 40t Year of manufacture: 2014 Stroke of the punch: 250mm

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) Dob Hhwjifu Arj Hwocg - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: refurbished (used), WOLFKING 3000 LIT Dceb Hohzq Sqohw Hweg ID.NO. 2263 Wolfking 3000 liter spiral / paddle mixer with discharge hatch at the bottom very strong & well-built model. Dimensions machine 345 x 127 cm H 200 cm.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Manufacturer: Flott Type: BC 40 Super Year of manufacture: 2006 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Dsbst H Rv To Hhw Hwocg

Condition: used, Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 081222125 - 178/06, center width: 3,000 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, feed length X-axis: 455 mm, feed length Z-axis: 2,850 mm, rotational speed (max.): 1,600 rpm, TECHNICAL DETAILS Turning diameter: 630 mm X - stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Center distance: 3000 mm Spindle head: DIN 55027 - 11x290 Feed force - Z: 23.9 kN Feed force - X: 11.3 kN Rapid traverse speed X-axis: 6.8 m/min Rapid traverse speed Z-axis: 4 m/min Swing diameter over radial slide: 540 mm Max. swing diameter: 830 mm Travel path of the cross slide: 450 mm Spindle head max. passage for rolled material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outer diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner taper: MK6 type Hydraulic tank: 15 l Coolant tank: 220 l Coolant tank for chip conveyor: 160 l Spindle stages Gear 1: 1 - 225 rpm Gear 2: 5 - 560 rpm Gear 3: 7 - 900 rpm Gear 4: 18 - 1600 rpm MACHINE DETAILS Machine length: 5200 mm Machine width: 2110 mm Machine height: 1995 mm Dsb Hevvt Riohw Hwjcg Machine weight: approx. 6.850 t - Without chip conveyor and coolant tank

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 6,000 W, overall weight: 6,500 kg, type of input current: three-phase, worktable length: 1,200 mm, worktable width: 1,200 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1500 mm x Y 3000 mm x Z 120 mm Dceb Hhwst A N A Rs Hwjg High-precision linear axis system with 3-6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H): 2310 × 8505 x 2505 mm / laser machine 4.0 T Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: ready for operation (used), Condition Used Dcjb Hhw Hevl Ay Ejwsg Stock Number 412989 This listing is for a Heidolph MR 3000 Magnetic Stirrer. The unit is in full working condition and is ready for immediate release.

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent Dceb Hhw Hshv A A Dswjg - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Year of construction: 1996, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 637110, For Sale: Hunkeler VEA 3000 End Sheet Gluing Machine Manufacturer: Hunkeler Model: VEA 3000 Condition: Fully refurbished by the official manufacturer! (the restoration invoice and parts list are included in the photos) Year of Manufacture: 1996 The machine is in perfect condition with complete documents. A few years ago, the official manufacturer fully refurbished it, and it has barely been used since then. Sold directly by the seller Viewing and testing available on-site Dcebjtx Thqj Hhw Hweg Consultations with our technician can also be arranged Currently, the machine is located in Lithuania, Kaunas

Year of construction: 2024, Condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg - Tub water capacity: 280 L/shift - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Dcjb Hhsfd E Trew Hweg Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Condition: excellent (used), Year of construction: 2008, 3-storey shelving system, SSI Schäfer, R3000, approx. 2,480 bays, approx. 8m high, 60kg per shelf, with special "fire protection shelves", shelves 1.30m x 0.60m - second-hand - : = Price ex location: now only 169.500.-€ (net) incl.. Dismantling instead of 195.000.-€ (net), plus dismantling etc.! Price for larger partial quantities on request! The system is equipped with special "fire protection shelves"! Manufacturer: SSI Schäfer Type: R3000 Year of construction: 2008, and 2009, the system was extended twice Basic dimensions: approx. 45 x 44m Shelf dimensions: approx. 1.28m x 0.59m Shelf height: approx. 3cm Double shelf depth: 1,206mm Number of bays: Ground floor approx. 744 units Upper floor approx. 868 units Shelf load: 60kg Bay load: 5,000kg Max. Load: traffic routes 500kg/m2, intermediate aisles: 350kg/m2 Total height of the system: approx. 8m 6 stairways branch corridors with gratings, main corridors with chipboard Floor height: ground floor approx. 2.83m Upper floor: approx. 2.86m 2nd floor: approx. 2.20m Aisle width: normal aisles approx. 1.10m Deb Hhweuzhvus Hwscg The facility is equipped with a sprinkler system, which can be provided on request. Level 0 = approx. 5,208 shelves Level 1 + 2 = approx. 6,076 shelves each, i.e. 12,152 in total Total approx. 17,360 shelves Condition: very good Available: from approx. August / September 2024 Location: Lake Constance

Condition: used, mileage: 488,000 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 5,600 mm, loading space height: 600 mm, Year of construction: 2010, first registration: 03/2010, Equipment: ABS, air conditioning, crane, MAN TGS 28.440 / 6x2 Platform 5,60 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 488 000 km Dcjb Hhw Hsn Hu Hbswjg EQUIPMENT: ? ABS ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 560 x 248 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 485/135 cm TIRE SIZE: FRONT: 385/65R22,5 BACK: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HMF 3000 K5 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Year of construction: 1979, bar material dia. max. 85 mm bar length 3000 mm No. 0703 1 used bar feeder TRAUB 3D / E85 / 3000 Z Bar diameter : max. 85 mm Dcob Hhsunuw Dsw Hwjg Bar length: max. 3000 mm

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 403/FL06, punching force: 28 t, laser power: 2,000 W, laser wavelength: 1,070 nm, punching diameter: 105 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 15 mm, table length: 3,100 mm, table height: 900 mm, table width: 4,250 mm, No reserve price - guaranteed sale at the highest bid! Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Dcsb Hhwevwbrwj Hweg Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: used, Year of construction: 2001, Used Capsuling Machine Vulcan 2001 Manufacturer: Robino & Galandrino Model: Vulcan 3000 L Year: 2001 Speed (b / h): 3000 Formats processed: 3 Dcsb Hhovguqrjw Hwjg Safeguards: Yes Manuals available: Yes Revisions available: No Operating state: Running Processed product: PVC capsules of different sizes (diam. 31/34) No. of heads: 1 Capsule type: PVC Capsule magazine: Standard Spare parts available: No

Year of construction: 2024, Condition: new, MDK 3000 brush washer with muser The unwashed fruit is delivered to the infeed, after which it is cleaned again on the conveyor belt after pre-washing by a further rinsing water shower. Easy to clean, equipped with durable food-safe polypropylene/acetal modular belts with infinitely adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: Dcsb Hhw Hofd E R Ujwjg - Nominal capacity: 3000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 4300x1250x2222 mm - Discharge height: 1370 mm - Weight: 420 kg - Wash tank water capacity: 800 L/shift - Water requirement: 100-200 L/h (depending on the settings) - Water connection: ¾" quick connector - IP65 electronics - Muser equipped with a heavy-duty hammer (also suitable for beet and quince) - Etching mill: the etching mill can be switched off electronically, so the washer is also suitable for stone fruit - Equipped with 4 counter-rotating brushes for intensive washing - Rotating shovel that pushes the fruit towards the conveyor belt Optional: -Different sieve inserts for the grinder: for the desired fineness of fruit and vegetables -Stop 'n' Go system - Sensitive sensor that allows the fruit washer and any type of Maurer belt press to work in harmony with the washer without clogging -Adaptive electric valve - The fresh water jet only works when the conveyor belt is running -Air injection - with nozzles and a fan at the bottom of the tub for intensive washing -Air knife - removes water from the surface of the fruit so that less water gets into the end product -Circulation pump with filter - ensures the correct flow rate in the wash container

Condition: ready for operation (used), machine/vehicle number: 01020815120357, Condition Used This listing is for a Grant Instruments LMC-3000 Centrifuge Dcjb Hhworvd T Hs Hwog The Grant LMC-3000 is a low speed benchtop centrifuge ideal for biomedical applications.

Year of construction: 1997, Condition: excellent (used), PBR T35SNC x 3000 cycle turning machine Year of manufacture: 1997 Control: Fagor Center distance: 3000 mm Max. turning diameter: 630 mm Center height over bed: 300 mm Deb Hhwsil Hzzs Hwjcg center height over slide: 165 mm spindle bore: 105 mm Rotational speed: 2000 rpm weight: 6200 kg Accessories incl: Multifix set (without steels), chuck (See photos) + additional chuck. No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: as good as new (ex-display), Thickness of sanding paper 1,3 mm Width of sanding paper 54 mm Length of sanding paper 7820 mm tooth indexing min/max 1,5 - 2 mm Dimensions (HxWxD) 2er Paket 1000*800*180 mm Dcsb Hhounudwow Hweg

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 650 De Luxe In-Line Year of construction: 2003 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 650 mm, bottom 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. Dcjb Hhouy Sfkew Hwog The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor. Manufacturer: Kallfass GmbH Type: Shrink tunnel Standard 650 NT Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical data: Tunnel passage width: 650 mm Tunnel outlet height: 400 mm Tunnel outlet, extended: approx. 500 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 26.5 KW Rated current at 400 V: 38.5 A for single operation Universally applicable high-performance shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings at the bottom for precise control of the hot air outlet for optimum shrinking results even with difficult product contours. The air circulation system, a tunnel hood with additional double chamber system and significantly increased insulation all round insulation all round ensure energy-saving operation. Equipped with infinitely variable bar chain transport. Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: PR4-3000-07190386, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 22 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting area: 3000 x 1500 mm Drives: 400 W AC OMRON servo motors Plasma source Hypertherm: Powermax 105 Dcsbsvw Amco Hhw Hweg Duty cycle: 80% 100% duty cycle: 94 Amps Maximum piercing capacities Mild steel: 22 mm Stainless steel: 20 mm Aluminium: 20 mm MACHINE DETAILS Space requirement: 5.50 x 2.80 m Machine dimensions: approx. 3.7 x 2.0 m Transport dimensions: 3780 x 2115 x 1500 mm Weight: 1.1 t Box software: included Operating hours: 265 arc hours

Year of construction: 2024, Condition: new, machine/vehicle number: 123456, MMD 3000 washing system with swivel-mounted pusher The unwashed fruit is delivered to the infeed, after which it is pre-washed and cleaned again on the conveyor belt by a further rinsing water shower. Dob Hhod Aqmzsw Hwjcg Easy to clean, equipped with durable food-safe polypropylene/acetal modular belts with infinitely adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: - Nominal capacity: 1000-2000 kg/h - Power requirement: 3 kW, 400 V, 16 A, three-phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 3325x800x2200 mm - Discharge height: 1380 mm - Weight: 240 kg - Wash tank water capacity: 280 L/shift - Water requirement: 20-100 L/hour (depending on the settings) - Water connection: ¾" quick coupling - IP65 electronics - Infinitely variable belt speed - Muser equipped with a heavy-duty hammer (also suitable for beet and quince) Options: -Different sieve inserts for the grinder: for the desired fineness of fruit and vegetables -Stop 'n' Go system - Sensitive sensor that allows the fruit washer and any type of Maurer belt press to work in harmony with the washer without clogging -Adaptive electric valve - The fresh water jet only works when the conveyor belt is running -Air injection - with nozzles and a fan at the bottom of the tub for intensive washing -Air knife - removes water from the surface of the fruit so that less water gets into the end product -Circulation pump with filter - ensures the correct flow rate in the wash container

Condition: ready for operation (used), Condition Used Dceb Hhw Hju Uxc Ajwjg Stock Number 412946 This listing is for a Thermo Scientific Dionex Ultimate 3000 UHPLC Focused systemThe Thermo Scientific™ UltiMate™ 3000 HPLC system offers UHPLC compatibility across all modules, ensuring maximum performance. Covering flows from 20 nL/min to 10 mL/min and offering a wide range of pumping, sampling, and detection modules, the UltiMate 3000 series provides solutions for all your chromatography s system comprises of the following unitsDAD-3000RS Rs Diode Array DetectorWPS-3000TSL SEMIPREP AutosamplerHPG-3200BX PumpAFC-3000 Automated Fraction CollectorLaptop with softwareManualsPlugs and wiresAccessories as seen in iMate 3000 HPLC system Features Benefits: UHPLC design for all nano, standard analytical, and RSLC systems.620 bar maximum pressure for basic and standard analytical systems—setting a new benchmark in HPLC.x2 Dual Systems form a unique platform for routine analysis, increased productivity solutions, and advanced chromatographic tems are controlled using Thermo Scientific™ Chromeleon™ Chromatography Data System software—providing Intelligent Functionality and Operational Simplicity™.Systems are offered with Thermo Scientific™ Viper™ and Thermo Scientific™ nanoViper™ fitting systems—fingertight, zero-dead-volume connections even at UHPLC pressures.

Condition: new, table length 2200 mm table width 1500 mm stroke height 1900 mm weight max. in kg 3000 kg total power requirement 1,5 kW stroke speed - idle stroke upwards 55 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,650 t Deb Hsvn U D Ijhw Hwecg dimensions of the machine ca. 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, Year of construction: 1978, round bar steel - mm square edge steel - mm Debsttadbo Hhw Hwjcg L-beam - mm total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 2,2*1*2,35 m div. punches and dies Foot switch Spare blade