Used Glob-Ram Rm120 for sale (22,712)

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Dsln Eewabhpowtgeut Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Weiler Commodor 3-axis lathe with feed and spindle drive and digital readout from K&C, NEW, excellent condition! Technical specifications: >> Year of manufacture 1989 Machine no. 89-2633 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 45 to 2000 rpm Dolswhd E Hjn Ewtgjut >> Spindle bore 56 mm >> Short-taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 2000 kg >> Spindle brake can be switched on >> Drive power 7.5 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3 New K&C 3-axis digital readout, 12-month manufacturer's warranty with instruction manual. Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200-piece tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal, >> New 200mm three-jaw chuck with 2 sets of jaws >> Multifix size B with 2 tool holders >> Electronic spindle protection >> Coolant system >> Multi-stop About the machine: Offered is a Weiler Commodor center lathe in very good condition. The machine is fully functional. The spindles run smoothly with little crank play. The machine has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes working even easier and more precise. The machine has undergone electrical and mechanical testing at our facility. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and test this machine live on-site.

Condition: good (used), Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Deln Ejwh Uaujwtgsut Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Condition: good (used), Functionality: fully functional, Dough divider and moulder Record Automat Roll press for dividing and round molding Dough insert from 750 to 2550 grams 30-piece / 25 to 85 grams/piece with 5 rounding plates 400V connection, 1.1 kW, 16A CEE plug Dimensions: 690 x 580 x 1650 mm, WxDxH Used machine Many bread roll presses in stock! Dueln Eorhfqcjwtget

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 21 mm/s, table width: 120 mm, retraction speed: 200 mm/s, controller manufacturer: Cadman-B Touch, power: 42 kW (57.10 HP), net weight: 15,000 kg, passage width: 2,600 mm, additional equipment features: yes, 9 assen: Y1 / Y2 / X / R / X#39; / Z1 / Z2 / T1 / V Easy Form lasermeetsysteem Vergrote opening en vergrote slag CNC gestuurde buighulp Wila boven- en onder hydraulische klemming Wila gereedschapsstation Lasersafe-beveiliging Capacity: 220 ton x 3100 mm Backgauge: CNC Max stroke: 400 mm - option Duoln Eev Rwbzowtgjt Max distance between table -- ram: 600 mm - option Locking speed: 120 mm/sec

Condition: good (used), mileage: 855,738 km, power: 375 kW (509.86 HP), first registration: 05/2017, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 3,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Fixed - Globetrotter - Parking Air Conditioning = Remarks = Number of axles: 2, Configuration: 4x2, Tare weight: 8188 kg, Gross weight: 20500 kg, Total tank capacity: 1055 liters, 2nd Diesel Tank, Fifth Wheel Height: 113 cm, Fifth Wheel: Fixed, Number of Locks: 1, Suspension Type: Air Suspension, Cabin Type: Globetrotter, Cruise Control, Tachograph (Control Unit), Digital Tachograph, Air Conditioning, Parking Air Conditioning, Parking Heater, Color: White, Engine Power: 375 kW (503 Hp), Euro: 6, Transmission Type: I-Shift, Gears: 12, Power Steering, ABS, ASR = Additional Information = Transmission Transmission: 12-speed automatic transmission Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 11 mm; Right tire profile: 10 mm; Suspension: Leaf springs Axle 2: Dual tires; Left tire profile: 14 mm; Left tire profile: 14 mm; Right tire profile: 14 mm; Right tire profile: 13 mm Suspension: Air suspension Dimensions Dimensions (L x W x H): 600 x 255 x 420 cm Weight Unladen weight: 8,188 kg Payload: 12,312 kg GVW: 20,500 kg Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 3 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Dueln Ewtswgifcoget Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Dusln Ewtju Nmx Regjt Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: used, Year of construction: 2006, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, For sale is a 3-axis machining center from Donau, type Danusys 1510 L. The machine is fully functional, ready for use, and only processes soft materials such as aluminum and plastic. We will be cleaning it. History: 2022: New tool clamp 2021: Z-spindle replaced Technical specifications: Year of manufacture: 2006 Control: Heidenhain iTNC530 Additional service package installed Program run: 28,000 h X-axis: 1500 mm Y-axis: 1000 mm Z-axis: 700 mm Clamping area: 1500 x 1000 mm Dujln Eewhn Sqewtgot Table height: 750 mm Tool magazine: 30-station Tool holder: SK 40 Max. tool diameter: 76 mm Max. tool length: 250 mm Max. tool weight: 8 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: excellent (used), Automatic filling line Logdos Späth GmbH Type K-DOS.F/AL 40/ EX for filling liquids into buckets, hobbocks, IBC and drums EX protected mobile, movable on rollers compact dimensions : 3m x 2m x 2m (LxWxH) programmable X/Y axis and pallet pattern Dujln Ewsiyytqotget Very good condition, directly from production!!!

Condition: excellent (used), Functionality: fully functional, warranty duration: 3 months, DGUV certified until: 06/2026, year of last overhaul: 2025, Hobart Universal Dishwasher Model: UPS-GHN Higher Capacity and Flexibility Genius-X Fine Filter System Vapo-Active Steam Wash Concept - Basket Dimensions: 720 x 680 mm - Loading Height: 850 mm - 3 Programs with Color Display - Drain Pump, Heat Recovery Dusln Ewtewhakxegst - Rotor X Wash System - Detergent Dosing Unit / Detergent Direct Spray System - Rinse Aid Dosing Unit - Water Softener - DGUV V3 Certified Dimensions: 840 x 950 x 2200/2417 mm, W x D x H Connection: 400V, 18.5kW, 29.1 A, 32A CEE Plug Used machine, cleaned and tested 3-month warranty + spare parts service Option: Water Filter Maintenance Contract Service Package Instruction & Commissioning Find yours here Dishwasher!

Condition: good (used), Year of construction: 2021, machine/vehicle number: 117/SCS, Used Krasser CENTURIO high-performance sheet metal cutting machine - Automatic 5-roll straightener - Automatic adjustment of the splitting knives - With 5 pairs of splitting knives Duolnjwh Ix Re Ewtgst - Electric beam shear as cross-cutting unit - Pneumatic sheet width clamping The cutting depth, the cutting gap, and the guide values (depending on the material) are set fully automatically by the system, depending on the material-specific parameters stored in the machine database. - Roller shear as cross-cutting unit The roller shear enables partial cross-cutting (slitting). - Automatic labeling unit This option allows labels to be applied to individual sheet metal sections (sheet metal strips) for further sheet identification in subsequent processes. - Krasser OPTIMIZER This option includes a software program for entering, transmitting, and optimizing cutting orders. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 250 - 1250 mm Steel sheet thickness: 0.4 - 1.5 mm Aluminum sheet thickness: 0.5 - 2.0 mm Stainless steel sheet thickness: 0.4 - 1.0 mm Color: red Total power requirement: 32 kW Machine weight: 3600 kg

Condition: excellent (used), Year of construction: 1998, Gebr. Striebig Panel Saw Type: Standard II TRK Type: 6220 A Max. cutting width: 5300 mm Max. horizontal cutting height: 2100 mm Max. vertical cutting height: 2200 mm Max. processing thickness: 80 mm Sawblade diameter: 300 mm Sawblade bore: 30 mm Lower support: Fixed rollers Material support: Aluminum slatted frame with plastic supports Small part support: Yes Measuring system: Scale Dslnowg H Rie Ewtgjut Saw head pivoting: Manual Swivel slatted frame: Yes Mounting: Freestanding Motor power: 5.5 kW Extraction diameter: 100/120 mm Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (Option: 3500) wing assembly table ----- Manufacturer description: Duelot Tq Aaon Ewtgst Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table, for sashes up to a maximum height of 2500 mm with RU-SH, special screwdriver length 3000 mm, Width 1400 mm, inclination of the working platform manually adjustable. Usable width 2500mm Holder for fitting scissors or fitting punch. Pack of 10 swivel commuters for hanging the Wings, completely pneumatically foldable unhindered movement of the wings on the table surface. Device for sensing the length of the sash fittings for constant and variable/central handle position and any handle seat height for pre-drilled ones Wings, color dimension recognition for the fittings. Commuter height can be adjusted to either 50 or 60 mm at a stop. RU-SH, special screwdriver with pneumatic Depth switch mounted on carriage, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container Manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail depth can be manually adjusted to the left and right each with a 4-fold revolver stop. PSF - Pneumatic tensioning device for sashes against the side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips as an edition. Pos. 1.1 Article 6315 RU-BM-... fittings adjusted to customer specifications Pos. 1.2 Article 0500000 Holder tailored to customer punch/- assembly of one provided by the customer Hardware punch or hardware scissors (third-party product) on the sash assembly table. Please specify make when ordering!!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Options fitting bearing for RU-BM-3000: ----- Fixed fitting bearing variant: price EUR 3,210.00 Article 0630000 RU-BL-30/30 fitting bearing permanently mounted mounted above the wing assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each Separate partitions. Freestanding fitting bearing variant: price EUR 5,051.00 Article 0710000 RU-SBL3000/30 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2050 mm, Stand frame on the front without supports, 30 compartments, divided into 10 compartments in a row by dividers a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm. 4 angle supports for corner guides: Price: EUR 586.00 Leg length 120x120mm; angle approx. 3° The front edge of the angles is bent upwards by 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the hardware storage. ----- Additional charge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to a maximum height of 3000 mm with RU-SH, special screwdriver length 3500 mm, Width 1400 mm, inclination of the working platform manually adjustable. Usable width approx. 3000mm Additional price for RU-BM 3500 to RU-BM 3000: EUR 2,697.00 Fittings bearing for RU-BM-3500 (only possible free-standing): Price EUR 6,394.00 Ar...

Condition: excellent (used), Year of construction: 2020, Machine type: CNC machining center horizontal Manufacturer: DMGMORI Type: NHC4000 Commissioning: 2021 Control type: Mitsubishi M730BM Origin: Japan Storage location: Germany Delivery time: from stock Equipment Spindle speed 15,000 rpm, 30/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool length measuring system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Oil mist extraction interface - INTERLIT-TMF300/600 compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - 10 external M-codes - Increased 48 working coordinate pairs - Expansion of the part program memory to 1 MB with a maximum of 1,000 storable part programs Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Max. speed approx. 15,000 rpm Spindle motor approx. 30/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Deljwg Tw Ajn Ewtgout Machine weight approx. 7,600 kg This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale)

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, SAOMAD TITANUM CNC machining center for doors and windows – precision, power, and productivity combined! A top-quality opportunity – inquire now before it's too late! The SAOMAD TITANUM: Thanks to its innovative locking system technology and automatic workpiece measurement, reduced machining times, maximum flexibility, and uncompromising precision. Highlights & technical features at a glance: Automatic workpiece handling: • Electronically controlled workpiece turning unit with brushless motors • Semi-automatic rotary clamping system for double-sided tenon machining – without wasting time Powerful machining units: • Short-cut saw with 400 mm diameter & pneumatic plunge adjustment • 2 profiling spindles (50 x 320 mm) & 1 fitting groove spindle (40 x 170 mm) • Upper horizontal milling spindle for radius machining + glazing bead saw Sash bypassing & rebating: • Special system for bypassing sash frames (up to 600 mm wide) • Equipped for sloped windows, rebating, and shatter protection Smartly controlled – implemented with high precision: • SCM Jolly PC control • Continuously variable spindle stroke • 12-position tool changer, HSK-F63 clamping system • Integrated workpiece return Technical specifications at a glance: Doln Ewsv U Nm Rjtgjut • Spindle diameter: 50 mm • Spindle lengths: Slotted spindle 320 mm | Profile spindle 320 mm | Geared spindle 170 mm • Tool thickness: 120 mm • Cutting width / height: 120 mm • Radius motor & radius groups Ø: 200 mm • Machinable workpiece width: 200 – 500 mm • Horizontal spindles: 2 • 5-axis technology: ✔ • Conformity: CE mark Space requirements: • Length: 4600 mm • Width: 2300 mm • Height: 1841 mm Why the TITANUM? Because it combines everything modern manufacturing demands: automated, fast, precise – and flexible for every window geometry. Its robust construction and intelligent control system make it a true all-rounder for small, medium and large companies.

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 06/2026, year of last overhaul: 2025, Hobart Universal Dishwasher Model: UXSBÄKO-10A Genius-X Fine Filter System Easy Clean Concept - Basket dimensions: 720 x 680 mm - Loading height: 850 mm - 3 programs with color display - Drain pump - Rotor X wash system - Detergent dispenser - Rinse aid dispenser - Water softener - DGUV V3 tested Dimensions: 780 x 950 x 1980 mm, W x D x H Connection: 400V, 15.6kW, 24.4A, 32A CEE plug Used machine, cleaned and tested 6-month warranty + spare parts service Delnewhaize Ewtgout Option: Water filter Maintenance contract Service package Instructions & commissioning We have many other dishwashers in stock for you!

Condition: used, Year of construction: 2018, Weinig Dimter Unicut P Automatic cross-cut saw Automatic cross-cut saw UniCut P Integrated system consisting of cross-cut saw and motorized positioning slide. Fast, exact and safe cutting of individual parts or series. Very safe working. Workpiece is held pneumatically during cutting. Cutting area generously encapsulated. Good view of the cutting area thanks to transparent, impact-resistant polycarbonate hood. BG certified. Saw motor 7.5 kW Saw motor with increased power for particularly hard wood-based materials and large workpiece cross-sections or large packages or at high cutting frequency (e.g. when cutting pallet blocks). Outfeed table 2.4 m for manual removal of the workpieces by the operator Djlev Sblgjn Ewtgjut OptiCom Assist control Reliable work thanks to specially developed SCS (Smart Control System) control device. Largely insensitive to dust, vibrations or temperature differences. This makes it very durable. Production parameters are securely stored regardless of electrical voltage. Backup of production data statistics approximately every 15 minutes. Easy-to-read display device with backlight, individual adjustment of contrast and brightness. Separate function and number keys. Immediate continuation of work after power failure. The operation is very simple. No PC skills are required. The following operating mode is available: Automatic length cutting: After entering the length of the wood, the best fixed length combination is calculated according to the fixed lengths of the cutting list. This process maximizes the wood yield. Description: Motor power: 7.5 kW Electric 400V 50Hz - 3-Ph Cutting height: 120 mm Cutting width: 20-300 mm Push-up system: Push-up length: 6300 mm Extraction diameter: 1 x 150 mm Other comments: Opticom, length recognition and output table 2400 mm Total electrical load ca. 9kW Air consumption ca. 125 NL/Min. Working pressure Min. 6 Bar Air speed ca. 30 m/sec Dust extraction diameter 125mm Extraction volume req. 1.300 m³/h (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2016, Condition: used, New: No Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20153   Specifications: Model year: 2016 Deln Eewdu Idjwtgeut Width: 280 cm Minimum height: 135 cm Maximum height: 173 cm Width transverse position: 400 cm Mounting option: BM mount or parallelogram (selectable) Ready for delivery Description: This is a Saltvikplogen F-280 from 2016, and it can be delivered with either parallelogram or BM hitch . If you want both hitches, there is a small additional charge. The machine is ready for delivery, so it can be put into use quickly.

Condition: used, Year of construction: 2019, Empty weight: 842 kg Dimensions (LxBxH): 185 x 97 x 185 cm Price: On request - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: AP1545804 - Transport dimensions: 1850mm x 970mm x 1850mm (l x w x h) - Transport weight [kg]: 842kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dueln Ejwgmlajwtgjt Bram van Summeren

Condition: used, overall weight: 18,000 kg, empty load weight: 3,850 kg, maximum load weight: 14,150 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 1,000 mm, first registration: 03/2019, suspension: air, tire size: 385/55 R22,5, wheelbase: 5,070 mm, total length: 2,550 mm, total width: 2,490 mm, total height: 8,670 mm, construction height: 2,490 mm, Equipment: ABS, | Krone AZ 18F building materials trailer | BPW axles with disc brakes | Spare wheel holder | Loading dimensions: L 7.30 m W 2.49 m | Tires: 385/55 R22.5 | Perforated frame with external holes | Adjustable drawbar | Side wall height: 1 m | Errors, input and advance sales excepted. Dueln Ewtowihtkjget

Condition: good (used), Year of construction: 1996, age 1997 film wrapping machine L sealer hand feeding Deleuqn Ibjn Ewtgout shrinking tunnel mobile sub-frame

Condition: good (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller model: Siemens 840D, workpiece height (max.): 450 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, spindle speed (max.): 12,000 rpm, distance table to spindle center: 640 mm, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2 PIECES IN STOCK!!! The Mori Seiki NMV5000 DCG is a real powerhouse and we have taken over the working version from our customer (see video). Dujlewgkx Den Ewtgot Additional specifications; Max. workpiece weight table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode) 0 - 1200 min-1 Table rotation speed (standard) 0 - 120 min-1 Max. tool dia.: 125 mm Max. tool length: 300 mm Max. weight tool: 8 kg Coolant tank capacity: 750L Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Delivery includes: - Original Mori Seiki tool insertion stand. - KNOLL FKA/500 belt filter installation + 3 filter rollers. - Filter mist FX5000 emulsion extraction. - Renishaw OMP60 3D probe. - Chip conveyor. - Original documentation + electrical diagrams. - Emulsion temperature controller. Machines are currently not powered up but can be viewed! During disassembly, photos were taken everywhere, these will be shared after purchase for installation on location.

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: like new Equipment and technical specifications: Holz-Her DYNESTIC 7535 10.5 Lift machining center Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, unit head, and consoles Gantry-style traveling column Rack and pinion drive, helical gears, in the X and Y directions 1 ball screw in the Z direction for precise positioning MATRIX table Fixed, continuous machining table with grid divisions, continuous slots in the X and Y directions, 50 mm slot spacing with 25 meters of sealing cord for clamping the wear plate 1 machining area with stop bars / stop Height 30 mm, pneumatically lowerable. Two stop bars each in the Y direction and one stop in the X direction on the right (viewed from the front edge of the machine). Remote maintenance: Integrated network card for transferring control and program data. Data is transferred via a high-speed internet connection. Requirement: High-speed internet connection on the machine. USB port for data backup or for directly loading machining programs on the control panel. TECHNICAL DATA: Machining dimensions 7535 10.5: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances: X = 4695 mm Y = 2305 mm Z = 565 mm Doln Ewewhukgetgeut Max. machining height 7535/7735 Classic without pusher Z = 300 mm from table top edge (without wear plate) Max. overtravel height of the pusher over the table of the Push/Auto/Lift versions: Z = 250 mm from table top edge (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION: SOFTWARE CAMPUS V7 Plus CAD/CAM Software 1 license including material removal simulation 1 pc. Software license secured via license plug for the machine CAMPUS V7 PLUS, software for CNC machining centers Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS = 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology CONTROL Incl. ECO MODE - time-controlled shutdown of drive and control components to save energy Windows-based industrial PC controller Intel Core i5-6600 8 GB RAM 256 GB M.2 (NVMe SSD) 24V DC industrial standard Electronic stop monitoring for all selected stop bars or stop bolts on the machine. Safety device to prevent damage to the stops. Handheld control unit for remote control of the machine (13 m) with the following operating functions: > Start/stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop Control panel with 21.5" 16:9 touchscreen Capacitive multi-touch screen for intuitive operation - Continuous glass surface - Includes wireless

Condition: used, Year of construction: 1997, Dimensions (LxBxH): 80 x 65 x 115 cm Dujln Ewswgmk Nstget - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: A|| 115895 - Transport dimensions: 800mm x 650mm x 1150mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Suitable for thick solid wood and laminated panels Trimming length: 2250 mm Max. saw blade diameter: 315 mm With mounted scoring unit Max. cutting height at 90° / 45°: 100 / 80 mm Cutting width at the parallel stop: 900 - 1270 mm Motor: 4 kW Stable support thanks to a 270 mm wide sliding carriage and trimming frame Dsln Eswhulkewtgout Availability: Short term Location: Röllbach