Used Hyundai Robex 110D-7 for sale (143)

Condition: excellent (used), Year of construction: 2016, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information go online. Bweb Edswgxikjx Dkel

Condition: used, Year of construction: 2020, operating hours: 1,245 h, Field of application: Construction Drive: Track Bobswgkvpe Edx Dkjwl Delivery terms: CFR Please contact Martin Gervink for more information

Condition: used, mileage: 175,000 km, Year of construction: 2010, Field of application: Freight transport Serial number: KMFWBX7JABU282049 Please contact ATS Norway AS for more information Please provide reference number upon request: 19791 Specifications: Bsbov U Svuo Edx Dkswl - 2010 model - Mileage: approx. 175,000 - Transmission: Manual - Tires (see pictures) - 2 sets of tires - Interior design - Replaced engine - 3 seats - Length: 513 cm - Width: 192 cm - Curb weight: 2,040 kg - 4x2 - 163 hp - Rotor lamp - Trailer ball - Radio/CD - Air conditioning/ac Description: 2010 Hyundai 4x2 Van with interior. The engine was replaced around 164,000km. A newly overhauled engine was installed. It comes with two sets of tires. Can be delivered within a short time. Km: 175000 HK: 163 Technical approved: Yes EU-approved until: 19.06.2025 Own weight: 2040 Total Weight: 3160 Payload: 1045 Width: 192 Length: 513 Euro: 4 Gearbox: Manual

Condition: ready for operation (used), Year of construction: 2008, operating hours: 21,927 h, General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Control Unit Brand FANUC Model Series 21i-MB Main Drive Bwjb Edx Dswctxleksl Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: good (used), Year of construction: 2018, Vehicle description Diesel forklift HYUNDAI 50DA-9 Year 2018 acc. Counter 19.360 hours 5 tons lifting capacity 4.90 meters lifting height 2.48 meters Overall height 75 KW Cummins Euro 5 engine - Triplex free lift mast - 3rd and 4th circle to fork carriage - Cabin with heating (one door) - lighting system - ready for immediate use - Original paint - Service maintained machine Selling price: 13.500,-- net Bsb Edxor I Adzs Dkowl also favorable delivery possible!

Condition: good (used), Year of construction: 2021, operating hours: 3,633 h, Field of application: Construction Drive: Wheel Empty weight: 19.000 kg Dimensions (LxBxH): 876 x 250 x 342 cm Production number: M04096 Bsb Edov Sc N Tjx Dkswl Digging depth: 5.9 m

Condition: excellent (used), Year of construction: 2012, USED HYUNDAI-WIA KBN135 - YOM 2012 FIRST INSTALLED 2014 HEAVY DUTY, HIGH QUALITY, TRAVELLING TABLE LIVE SPINDLE CNC BORING & MILLING MACHINE WITH HARDENED & GROUND BOX GUIDEWAYS MACHINE CONSTRUCTION & FEATURES  ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  INFEEDING COLUMN, CROSS BED DESIGN FOR INCREASED ACCURACY & LOAD CARRYING CHARACTERISTICS.  LINEAR AXIS & ROTARY B AXIS MEASUREMENT SCALES FOR HIGH PRECISION MACHINING.  HEAVY DUTY 3 SPEED HIGH TORQUE MAIN SPINDLE.  HEAVY DUTY HARDENED & GROUND BOX GUIDEWAYS FOR INCREASED STABILITY & RIGIDITY.  PRE-TENSIONED DOUBLE ANCHORED BALLSCREWS.  W-AXIS TRAVEL 700 MM WITH 135 MM HIGH TORQUE SPINDLE.  NOTE: TOOLING, FIXTURE PACKAGE & COGSDILL CH CONTOURING & BORING HEADS AVAILABLE BY SEPARATE NEGOTIATION INCLUDED FACTORY FITTED MACHINE OPTIONS  ATC - AUTOMATIC TOOL CHANGER - 40 STATION  CHIP - BUCKET STANDARD  ATC – HEAVY TOOLS 30 KGS  CNC.OP – MANUAL GUIDE-I (NC FANUC 31i)  CHIP – CONVEYOR SIDE HINGED  CS – THROUGH SPINDLE COOLANT SYSTEM 15 BAR  GUA – COOLANT PROTECTION COVER  GUA – SURROUND FENCE  GUA – TABLE GUARD CE SPEC  POW – 50 KVA TRANSFORMER AND CABLE  SPGB – SPINDLE MOTOR – 22.0 / 26.0 KW  SPGB – SPINDLE SPEED 2,000 RPM  MS – LINEAR SCALES X, Y & Z AXES  MS – NCRT ENCODER TABLE Working Surface 2,000 x 1,800 MM Maximum Table Load 10,000 KGS Minimum Indexing Angle 0.001° TRAVERSES X-Axis 3,000 MM Bebsvaz Svo Edx Dkjwl Y-Axis 2,000 MM Z-Axis 1,600 MM W-Axis 700 MM Distance from Column to Spindle Centre 0 ~ 2,000 MM Distance from Table Surface to Spindle Centre 800 ~ 2,400 MM SPINDLE Spindle Quill Diameter Ø 135 MM Spindle Nose Taper #50 Spindle Speed 2,000 RPM Spindle Drive Method 3 STEPPED GEAR FEED Maximum Cutting Feed rate 4,000 MM / MIN Rapid Traverse (X-Axis) 8 M / MIN Rapid Traverse (Y-Axis) 8 M / MIN Rapid Traverse (Z-Axis) 8 M / MIN Rapid Traverse (W-Axis) 8 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS ATC Tool Storage Capacity 40 Maximum Tool Weight 30.0 KGS Maximum Tool Size Ø 130 X 600 MM Maximum Tool Size (no adjacent tool) Ø 260 X 600 MM Tool Shank BT-50 3 | Page Tool Selection Method FIXED ADDRESS MOTOR Spindle Drive Motor (Fanuc) (Max/Cont.) 22.0 / 18.5 KW TANK CAPACITY Coolant Tank 400 L Lubricating Tank 8.5 L Hydraulic Tank 200 L POWER SUPPLY Electric Power Consumption 64 KVA Air Consumption (0.5MPa) 250 LITRE / MIN Voltage 415V / 50HZ / 3PH Thickness of Power Cable OVER 50 MM² MACHINE Floor Space (L x W) 6,320 x 6,900 MM Height 4,800 MM Weight 37,200 KGS

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 5,069 h, load capacity: 13,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: standard, construction height: 3,550 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift truck ISO class: ISO class 4 = 5,000 - 10,000 kg Bwjb Ejwfvm Djdx Dkjl Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab, air conditioning,

Condition: used, Year of construction: 2017, operating hours: 5,417 h, Field of application: Construction Serial number: XLRASF5100G46xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19733 Specifications: - 2017 model - Hours: approx. 5417 - 171 kW - 30,500 kg - Chassis (see pictures) - Belt width: approx. 60 cm - Width of the machine: approx. 320 cm - Leica GPS - SMP Excavator Bucket - SMP Sanding Bucket - R8 Rototilt - Central grease - S70 Quick Release - Swing gear has been overhauled - Rear view camera - Extra light - Dent on right side, shown in pictures Bwob Edjv U R S Isx Dkol - Radio/CD - Air conditioning/ac Description: Hyundai HX300L crawler excavator from 2017. The excavator is certified and ready to be put into operation. It comes with a sanding bucket, digging bucket, rototilt and Leica GPS. Can be delivered within a short time. Watch video. Hours: 5417 Total Weight: 30500 Width: 320 Kw: 171

Year of construction: 2022, Condition: ready for operation (used), Control Unit Brand FANUC Model FOi Plus Main Drive Spindle speed range 3500 Spindle motor power 15/18.5 kW (max) Number of axis 4 Bwebevrlpco Edx Dksl Movement X-Axis Movement 215 mm Y-Axis Movement 110 mm [±55] Z-Axis Movement 680 mm Workpiece Workpiece drm over bed 820 mm Workpiece drm 300 mm Additional Equipment 2x straight driven tool holders 2x angled driven tool holders 15-inch touch display Fanuc Smart Guide Part program storage: 2MB Control Unit Brand FANUC Model FOi Plus Main Drive Spindle speed range 3500 Spindle motor power 15/18.5 kW (max) Number of axis 4 Movement X-Axis Movement 215 mm Y-Axis Movement 110 mm [±55] Z-Axis Movement 680 mm Workpiece Workpiece drm over bed 820 mm Workpiece drm 300 mm Additional Equipment 2x straight driven tool holders 2x angled driven tool holders 15-inch touch display Fanuc Smart Guide Part program storage: 2MB This 4-axis Hyundai Wia HD 2600SY was manufactured in 2022. It features a maximum turning diameter of 300 mm, turning length of 610 mm, and bar capacity of 81 mm. Equipped with a HW Fanuc FOi Plus control system, it offers spindle speeds up to 3,500 rpm and driven tools speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD 2600SY horizontal turning machine. Contact us for further details regarding this machine. Application Types Turning

Condition: like new (used), Year of construction: 2022, operating hours: 2 h, Functionality: fully functional, frequency: 50 Hz, type of cooling: water, fuel: diesel, continuous power (apparent): 17 kVA, motor speed: 1,500 rpm, Equipment: documentation/manual, The HYUNDAI series of diesel engine generators is the core product of HYUNDAI Power Equipment Manufacturing Co., Ltd. Thanks to their excellent performance, the generators are widely used in the construction, communications, banking, mining, leasing, and other special locations. As you would expect, HYUNDAI generators strive to meet your needs according to the concept of individual design through the excellent features of safe, reliable, and clean operation. HYUNDAI Power generators are reliable and professional. The advantages of low noise levels, energy savings, and stable performance have provided credible assurance to many companies. Our generators provide the following services: Continuous service, standby service, and emergency service Bwsb Edjv R Ifwsx Dksl

Condition: used, Year of construction: 2016, 3 axes HYUNDAI WIA F400 year of production 2016 Siemens 828D XYZ Linear Guides travel: X-800mm Y-460 Z-520mm table 1000x460mm spindle 12,000 rpm max tool magazine for 30 pieces BT40 spindle cone on BT40 cooling through the spindle chip conveyor Bwob Edx Dowbgkroksl

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Bobou A Td Te Edx Dkjwl Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, mileage: 166,000 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,170 kg, first registration: 04/2007, next inspection (TÜV): 07/2026, emission class: euro4, color: white, number of seats: 3, Year of construction: 2007, Equipment: ABS, central locking, had accident, Engine damage Further equipment: Bwsb Edx Dov Dz U Ejksl Airbag driver's side, Electrically adjustable exterior mirrors, Rev counter, Vehicle with double doors, Windshield laminated glass, Rear window heatable, Body/structure: Box, Load compartment partition with window, Height-adjustable steering column (steering wheel), Engine 2.5 ltr. - 103 kW CRDi KAT, Rear fog light, Radio preparation, 2 loudspeakers, Wheelbase 3080 mm, Tinted all-round windows, H4 headlights, Sliding door loading/passenger compartment right, Front and rear mud flaps, Side impact protection, Seats in cab: Double passenger seat, Seats in cab: Driver's seat with lumbar support, Timer (digital)

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 6,542 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 980 mm, fuel type: electric, mast type: triplex, construction height: 2,280 mm, fork carriage width: 1,100 mm, fork length: 1,500 mm, drive type: Elektro, construction width: 1,210 mm, net weight: 4,995 kg, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Bwsb Edet Ddw Ejx Dksl Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Non Marking Front tires Size: 23x9-10 Front tires Condition: 60 - 80% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 40 - 60% Battery Volt: 80V Battery Ah: 700Ah Battery Manufacturer: Hawker Battery type: PzS Battery year of construction: 2018 Battery condition: 60 - 80% Description: Full cab with heating, work lights front + rear, BlueSpot front + rear, rotating beacon, 3rd + 4th valve to fork carriage, hand lever load protection grille, sideshift, integrated sideshift 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, safety light, non-creeping tires, interior mirror, rotating beacon, windscreen wiper, single pedal, seat,

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements depth 3150mm Measurements width 1850mm Measurements height 2000mm Machine weight 4500kg Control Unit Brand FANUC Model 21i TB Main Drive Spindle speed range 4000 rpm Spindle motor power 15 kW Number of axis 2 Movement X-Axis Movement 210 Z-Axis Movement 750 C-Axis Movement 360° Bwsb Edswanmfsx Dkel Media Chip conveyor Yes Additional Equipment Tool Measuring Arm 3-Jaw Chuck Ø 215 mm Main Spindle /3-Jaw Chuck Ø 165 mm/ Sub-Spindle 2 /Workpiece Part Catcher /Full Documentation This 2-axis Hyundai Kia SKT21LMS horizontal turning machine was manufactured in 2008. Ideal for precision turning operations, it offers robust construction and reliability. Consider the opportunity to buy this Hyundai Kia SKT21LMS horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2009, In good technical condition. Year of construction 2009 - CNC control: FANUC Series 21i-MB - Work table dimensions (L x W): 1200 x 500 mm - Displacement in the X/Y/Z-axis: 1060/510/635 mm Bsbsuqxwas Edx Dkewl - Rapid feed in the X/Y/Z axis: 36/36/30 mm/min - Servo motor in the X/Y axis: FANUC a12/3000i 3kW - Z-axis servo motor: FANUC a22B/3000i 4 kW - Total weight of the VX-500 machine: 7000 kg Accessories: Chip conveyor, mist extractor, 4 axes, handwheel.

Condition: excellent (used), mileage: 171,922 km, fuel type: diesel, gearing type: mechanical, first registration: 08/2006, emission class: euro3, color: white, number of seats: 3, Year of construction: 2006, Engine displacement: 2,497 cc Technical condition: very good Visual condition: very good Beb Eswb D D Nodx Dkswl Contact Thierry Leemans for further information.

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank Bob Edxolrqiqo Dkswl • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 6,696 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 920 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 1,100 mm, fork length: 1,150 mm, drive type: Elektro, construction width: 1,210 mm, net weight: 4,885 kg, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Non Marking Front tires Size: 23x9-10 Front tires Condition: 20 - 40% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 40 - 60% Battery Volt: 48V Battery Ah: 810Ah Battery Manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2017 Battery condition: 60 - 80% Bweb Eot Ddxcedx Dkol Description: Full cab with heating, working lights front + rear, 3rd valve to fork carriage, 4th valve available, BlueSpot rear, rotating beacon, hand lever load protection grille, sideshift, integrated sideshift 3rd valve, 4th valve, rear work lights, front work lights, heating, load guard, full cab, safety light, non-creeping tires, interior mirror, rotating beacon, windscreen wiper, seat,

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Model 21i-MB Main Drive Spindle speed range 10000 Spindle motor power 11/15 kw Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Outer length 1200 mm Outer width 800 mm Min distance between vertical spindle and table 150 mm Max distance between vertical spindle and table 785 mm Table load 800 kg Media Chip conveyor Yes Additional Equipment Bwsbowannce Edx Dkol 4th axis TANSHING positioning function M Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure This 4-axis Hyundai Kia VX500 vertical machining center was manufactured in 2007. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia VX500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2019, machine/vehicle number: G3171-0100, This machine is only available to customers in the United Kingdom & Republic of Ireland HEAVY DUTY 3-AXIS SLANT BED, EXTRA LENGTH CNC TURNING CENTRE WITH C-AXIS & DRIVEN TOOLS, HARDENED & GROUND BOX GUIDEWAYS, BMT65 TURRET & 10" STANDARD CHUCK SIZE MACHINE CAPACITIES Bjb Edx Dshtq Abskjwl Swing Over the Bed - Ø 750 MM Swing Over the Carriage - Ø 480 MM Maximum Turning Diameter - Ø 410 MM Maximum Turning Length - 1,280 MM Bar Capacity - Ø 76 MM SPINDLE Chuck Size - Ø (10”) 254 MM Spindle Bore - Ø 95 MM Spindle Speed (Rpm) - 3,500 RPM Motor (Max / Cont.) - 22.0 / 18.5 KW Torque (Max / Cont.) - 493.2 / 414.7 NM Spindle Type - BELT Spindle Nose - A2-8 C-Axis Indexing - 360° (0.001°) FEED Travel X - 290 MM Travel Z - 1,350 MM Rapid Speed (X) - 20 M / MIN Rapid Speed (Z) - 24 M / MIN Slide Type - HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools - 12 Tool Size (OD) - Ø 25 MM² Tool Size (ID) - Ø 50 MM² Indexing Time - 0.3 SEC / STEP LIVE TOOL Motor (Max / Cont.) - 5.5 / 3.7 KW Milling Tool Speed - 4,000 RPM Torque (Max / Cont.) - 35.0 / 23.5 NM Collet Size - Ø 20 – ER 32 Type - BMT65P TAILSTOCK Taper - MT 5 Quill Diameter - Ø 100 MM Quill Travel - 120 MM Travel - 750 MM TANK CAPACITY Coolant Tank - 270 L Lubricating Tank - 1.8 L POWER SUPPLY Electric Power Supply - 27 KVA Thickness of Power Cable - OVER 35 MM² Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 4,171 X 2,002 MM Height 1,997 MM Weight 7,700 KGS FANUC 0IT CNC

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 6,719 h, load capacity: 3,000 kg, lifting height: 4,705 mm, free lift: 1,320 mm, fuel type: electric, mast type: triplex, construction height: 2,335 mm, fork carriage width: 1,115 mm, fork length: 1,100 mm, drive type: Elektro, construction width: 1,210 mm, net weight: 4,995 kg, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Beb Eot Ddw Sedx Dkowl Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Non Marking Front tires Size: 23x9-10 Front tires Condition: 60 - 80% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 60 - 80% Battery Volt: 80V Battery Ah: 700Ah Battery Manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2017 Battery condition: 60 - 80% Description: Full cab with heating, working lights front + rear, 3rd valve to fork carriage, 4th valve available, BlueSpot rear, rotating beacon, hand lever Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Heating, Full cab, Safety light, Non-creeping tires, Interior mirror, Rotating beacon, Windscreen wiper, Seat,

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 7500 kg Control Unit Brand FANUC Model Series 32i-model A Main Drive Number of axis 3 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Additional Equipment Includes 3 workpiece clamps This 3-axis Hyundai Wia F500 vertical machining centre was manufactured in 2012. It features a robust 7500kg frame, X-travel of 1060mm, Y-travel of 510mm, and Z-travel of 635mm. Equipped with a BT-40 tool shank, spindle speed up to 10,000rpm, and a 30pc magazine capacity. Includes about 30 toolholders and 3 workpiece clamps. If you are looking to get high-quality milling capabilities consider the Hyundai Wia F500 machine we have for sale. Contact us for more information. Bob Edjv Uc Sasx Dkowl Application Types Milling

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, USED HYUNDAI-WIA KBN135C CNC HORIZONTAL BORING MACHINE - YOM 2018 MACHINE CONSTRUCTION & FEATURES  One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity.  Infeeding Column, Cross Bed Design for Increased Accuracy & Load Carrying Characteristics.  Linear Axis & Rotary B Axis Measurement Scales for High Precision Machining.  Heavy Duty 3 Speed High Torque Main Spindle.  Heavy Duty Hardened & Ground Box Guideways for Increased Stability & Rigidity.  Pre-Tensioned Double Anchored Ballscrews. INCLUDED FACTORY FITTED MACHINE OPTIONS  ATC - AUTOMATIC TOOL CHANGER - 40 STATION  CHIP - BUCKET STANDARD  CHIP - CONVEYOR SIDE HINGED  CNC.OP - MANUAL GUIDE-I (NC FANUC 31i)  CS - COOLANT SUB TANK  CS - THROUGH SPINDLE COOLANT SYSTEM 20 BAR  GUA - COOLANT PROTECTION COVER  GUA - SURROUND FENCE  GUA - TABLE GUARD CE SPEC  POW - 50 KVA TRANSFORMER AND CABLE  SPGB - SPINDLE MOTOR - 22.0 / 26.0 KW  SPGB - SPINDLE SPEED 2,000 RPM TABLE Working Surface 2,000 x 1,800 MM Maximum Table Load 15,000 KGS Minimum Indexing Angle 0.001° TRAVEL X-Axis 3,000 MM Y-Axis 2,000 MM Z-Axis 1,600 MM W-Axis 700 MM Distance from Column to Spindle Centre 0 ~ 2,000 MM Distance from Table Surface to Spindle Centre 800 ~ 2,400 MM SPINDLE Spindle Quill Diameter Ø 135 MM Spindle Nose Taper #50 Spindle Speed 2,500 RPM Spindle Drive Method 3 STEPPED GEAR Bwjb Edx Deva Adgokjl FEED Maximum Cutting Feedrate 4,000 MM / MIN Rapid Traverse (X-Axis) 10 M / MIN Rapid Traverse (Y-Axis) 10 M / MIN Rapid Traverse (Z-Axis) 10 M / MIN Rapid Traverse (W-Axis) 8 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS ATC Tool Storage Capacity 40 Maximum Tool Weight 20 KGS Maximum Tool Size Ø 125 X 600 MM Maximum Tool Size (no adjacent tool) Ø 250 X 600 MM Tool Shank BT-50 Tool Selection Method FIXED ADDRESS MOTOR Spindle Drive Motor (Fanuc) (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Fanuc) (Max/Cont.) 3,677 / 3,112 NM TANK CAPACITY Coolant Tank 400 L Lubricating Tank 8.5 L Hydraulic Tank 200 L POWER SUPPLY Electric Power Consumption 42 KVA Air Consumption (0.5MPa) 250 LITRE / MIN Voltage 415V / 50HZ / 3PH Thickness of Power Cable OVER 50 MM² MACHINE Floor Space (L x W) 6,800 x 7,510 MM Height 5,369 MM Weight 46,500 KGS STANDARD SUPPLIED MACHINE FEATURES 5 Controlled Axes – X, Y, Z, W, B Linear Measurement Scales (X, Y & Z-Axes) 4 Simultaneous Controlled Axes Rotary Scale (B-Axis) B-Axis Table 0.001˚ Machine Guidance (HW-MCG) Spindle Cooling System Tool Monitoring (HW-TM) 40 Station ATC Energy Saving System (HW-ESS) T-Slotted Table Machine Monitoring System (HW-MMS) Table Index Pin (4 X 90˚) Machine Condition Selection (HW-MCS) Table Auto-Clamp Device Adaptive Feed Control (HW-AFC) Screw Type Chip Conveyor Conversational Programming - Smart Guide-i Spindle Warm Up Function Front around table guard & external heavy duty fencing Electrical & Mechanical Manuals Call Light (1 Colour) Operation & Programming Manuals Work Light Remote MPG W & Y-Axis Clamp Device Levelling Pads