Used Oil & Steel Octopussy 2190 Twin for sale (29,692)

Condition: used, Year of construction: 2015, Field of application: Construction Serial number: 11-1xxxx Please contact ATS Norway AS for more information Fgjlqovg Rcdo Eg Tqob Please provide reference number upon request: 17783 Specifications AMV: - 2015 model - Not certified - Engine hours: 2297 hours - Transmission hours: 688 hours - compressor hours: 8056 hours - Pump hours: pump V: 8878t- Pump S: 9170t- Pump H 8788t - Percussion hours: stroke v: 2950t-stroke s: 3142t- stroke H 2984t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery

Condition: good (used), Year of construction: 2018, operating hours: 3,797 h, lifting height: 2,844 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, mileage: 3,797 km, lifting capacity: 1,400 kg, EXPECTED Fgslqjwhlcyj Eg Tqeb This electric duplex stacker from the Still brand from 2018 is in good condition;The capacity is 1,400 kg;The stacker lifts to a height of 2,844 mm;Drive-through height 1,915 mm;Equipped with a FREELIFT and an INITIAL LIFT and therefore ideal on uneven floors;Only 3,797 hours on the counter;The battery is equipped with an external charger and an automatic filling system;Make an appointment for a test drive.Video will follow!  FINANCIAL LEASE POSSIBLE, ask for the conditions  Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner*

Condition: used, Year of construction: 2017, Foil wrapping machine Sitma WM 60 Year: 2017 The new automatic intermittent motion side seal machine is equipped with infeed conveyor, shrink tunnel and delivery conveyor Description: - Semi automatic setting Fgslq Eowhi Iyjg Tqeb - Colour monitor with touchscreen - Straight infeed - Foil unit - Shrink tunnel Specifications: Sitma WM 60 - Packaging possibilities Min./Max. Length: 100 • 420 mm. Min./Max. Width: 75 -420 mm. Min./Max Height: 1-200 mm. Min./Max width of micro-perforated single fold film: 155 • 655 mm. Max. mechanical speed: up to 3,600 cycles per hour

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, Felqewhxh Ao Eg Tqsgb control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Fslq Egou R S Ele Tqogb Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Folq Esb Ilbfog Tqegb Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Condition: used, Year of construction: 2014, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17779 Specifications AMV: - 2014 model - Not certified Fjlq Eovg Nblog Tqjgb - Engine hours: 2097 h - Transmission hours: 612 hours - Compressor hours: 10999 hours - Pump hours: pump V: 10840t- Pump S: 11232t- Pump H 10736t - Percussion hours: stroke v: 3923t-stroke s: 3811t- stroke H 3770t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery.

Condition: good (used), Year of construction: 2005, operating hours: 3,897 h, fuel type: electric, mileage: 3,897 km, lifting capacity: 2,000 kg, net weight: 845 kg, This electric ride-on pallet truck from the JUNGHEINRICH brand is from 2005;The pallet truck has a capacity of 2,000 kg;Length of forks 1,400 mm;The 2017 battery has an automatic filling system and an external charger;Make an appointment for a test drive.Video follows Fgjlq Egevcd Rto Tqob

Condition: used, Used Viessmann type Vitoplex 200 hot water boiler. Heating capacity rated 900kw at 6 bar pressure with maximum 100 deg.c. Includes Oilon model GP-90 M biogas burner. Includes various heat exchanger, pumps, values & instrumentation all housed in Energytech container. Has double membrane type Tecon Biogas 215 gas holder. Approximate capacity 660cumt with an operating pressure at 33mbar. Folq Esvtn Haog Tqsgb

Condition: excellent (used), Year of construction: 1996, operating pressure: 10 bar, 2 used steam boilers ----- - mounted on a skid - Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 14 sq m Capacity: 800 kg/h Permissible operating pressure: 10.0 bar Increased test pressure: 18.0 bar Felq Ejwhxhvsg Tqsgb Water capacity at low water level approx.: 748 l Water capacity when full approx.: 1,108 l Year of construction: 1996 Equipped with a Weishaupt GL3/1-E oil burner, ZMD, 90-630 kW, gas control line, feedwater pump, control cabinet and the existing coarse and fine fittings.

Condition: good (used), Year of construction: 1987, number of straightening rollers: 7, coil weight: 500 kg, material thickness: 5 mm, sheet thickness steel (max.): 5 mm, coil width: 200 mm, sheet thickness (max.): 5 mm, load capacity: 500 kg, material width: 200 mm, CONTROLS .. electronic controls OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 200 mm .. sheet thickness max.: 4.5 mm .. coil weight max.: 0.5 to DECOILER .. coil weight max.: 0.5 to .. mandrel expansion range from: 250 mm .. mandrel expansion range up to: 550 mm LEVELLER UNIT .. sheet width max.: 300 mm .. sheet width (min): 20 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 0.5 mm .. material cross section max. (450 N/mm2): 800 mm² Fslqsv T This Eg Tqogb .. number of leveller rolls: 7 .. diameter of leveller rolls: 65 mm .. number of infeed-/outfeed rolls: 4 .. diameter of feed rolls: 65 mm .. drive power: 1.5 kW .. loop controls: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 380 V .. mains frequency: 50 Hz

Year of construction: 2003, Condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Fgolevcqz Eeq Eg Tqjb Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Fgolqjvg Nt Ie Eg Tqsb Please contact us for more information or a viewing! Hours: 10000

Year of construction: 2015, Condition: excellent (used), 10 turning steels Make Sandvik Coromant : Fgslqjfr T D Ts Eg Tqeb 1 : 340 SC5 DCLHR 291311 285 2226 2 : 340 SC5 DCLHR 291311 285 2226 3 : 340 SC5 DCLHR 291311 285 2226 4 :C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C 10 :MPDES 26073-105RO03C Tools are sold individually or as a lot Unit price 80 Euro plus VAT.

Condition: excellent (used), DATEC EMJ-2505 Coil Feeder, Sheet Winder Manufacturer: DATEC CO., LTD. Type: EMJ-2505 Fjlq Eg Tjwh Ttajqjgb Coil Width: 250 mm Coil Inner Diameter: 300–508 mm ⌀ Coil Outer Diameter: 1000 mm ⌀ Coil Weight: 500 kg Sheet Thickness: 0.3–2.6 mm Compensating Capacity: 480 mm² Speed: 12 m/min Motor Power: 0.4 kW Input Voltage: 220 V / 50 Hz

Condition: used, Year of construction: 2015, Functionality: fully functional, FOR SALE | Heidelberg SBG | 56x77cm ・Fully Refurbished 2015 ・2 Foil Rewind ・4 Zone Heated Steel Drop-In Plate ・Automatic Impression ・Superb Machine | Fully Serviced | Excellent Condition CAN BE VIEWED AND TESTED IN THE UK AVAILABLE NOW | £26,500 Fslq Egswh I Sko Tqegb

Condition: used, Year of construction: 1990, number of straightening rollers: 21, coil weight: 3,000 kg, material thickness: 7 mm, sheet thickness steel (max.): 7 mm, coil width: 260 mm, sheet thickness (max.): 7 mm, load capacity: 3,000 kg, material width: 260 mm, controller manufacturer: SIEMENS, controller model: S7, CONTROLS .. PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 260 mm .. sheet thickness max.: 6.5 mm .. coil weight max.: 3 to .. feed velocity max.: 20 m/min .. feedstock transport direction: right to left COIL CHAIR .. coil weight max.: 3 to DECOILER .. design: single reel, traversable .. sheet width max.: 260 mm .. coil weight max.: 3 to .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet thickness max.: 6.5 mm .. material cross section max. (450 N/mm2): 1500 mm² .. number of leveller rolls: 21 Fjlewh S Ucjq Eg Tqogb .. diameter of leveller rolls: 50 mm .. loop controls: yes decoiler KOHLER, type 3000.1 with coil-chair straightening machine KOHLER, type KRM 50.260/2 transfer bridge 6970 mm, hydraulic operated

Condition: good (used), Minipack Torre Mailbag Packer The device is functional and ready for production, in very good condition. The photos show the product being sold. Produced in Italy. Manufacturer’s description: Mailbag is a digital compact system for packaging in plastic bags, ideal for packaging brochures, newspapers, books. Single-phase power supply (airless) is easy to use with mounted wheels, the system can be easily moved from one place to another with minimal fuss. A product, e.g. a magazine inserted into the feeder, initiates a photocell, detects the package and moves the film and product to the closing system. The combination of transverse and longitudinal seals closes the package and also creates a seal for the next product. The finished package gently falls into the receiving basket at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width 160 mm Max. package width 250 mm Min. package length 100 mm Max. package length 360 mm Max. film thickness 30 microns Machine dimensions 600 mm x 840 mm x 1050 mm Weight 144 kg Power supply 230V Fgjlq Egswha Abj Tqob Power consumption 0.6 kW

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) Fjlewdvg Uoq Eg Tqegb - Lights - Radio control - Ready for delivery Description: We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Total Weight: 15000 Width: 241 Hammer hours: 6500

Condition: good (used), Year of construction: 2008, operating hours: 15,244 h, General information Field of application: Construction Serial number: 108T11701-1 Drivetrain Drive: Track Fgjlq Egswdw Nkj Tqeb Make of engine: C7 Weights Empty weight: 15.100 kg Condition Technical condition: good Visual appearance: good Other information Machinetype: Top hammer Emission level: Stage IIIA / Tier III Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), This line can process cold-rolled plate / hot pickled plate / hot galvanized plate / electro galvanized plate / prepainted sheets minimum thickness: 0,3 mm Endproduct: - min/max length: 300/6000 mm - productioncapacity 300 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - total installed power: 500 kW Line consists of: 1) Soenen 4 armed coilholder Type AL1600/27/4 - max cap per arm: 27 ton - speed: 1 turn per minute - opening hook: 190 mm - power: 2,5 kVa - weight: 26 ton 2) Soenen coilwagon Type HH27 - max cap: 27 ton - max lifting height: 800 mm - min outside dia: 508 mm - displacement: 15 meter - displacementspeed: 8 m/min - turning speed: 10 m/min - weight: 8,6 ton 3) Soenen Decoiler Type AM1600/27V - max cap: 27 ton - min/max width: 250/1600 mm - min/max outside dia: 508/2000 mm - min/max inside dia: 480/520 mm - max decoilingspeed: 100 m/min - weight: 21 ton 4) Soenen feeder rolls + shear Type PR1600 - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 160 mm - speed: 20m/min - weight: 3 ton 5) Pit 6) Soenen Puller Type 2VR1600EE - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 95,5 mm - productioncapacity 500 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - max speed: 150 m/min - weight: 5,8 ton 7) Soenen high speed mechanical shear Type CGM4-16 Fgelq Eewdy Sbjg Tqeb - min/max thickness: 0,3/4 mm - 6 mm st37 - max length: 1600 mm - cuttingangle: 1° - 200 strokes per minute - interchangable cassette with cuttingknives - weight: 7,6 ton 8) Soenen outfeed - speed: 170 m/min - width: 1600 mm - length from cuttingline: +- 7000 mm - weight: 4,2 ton 9) Soenen Outfeed conveyor Type TB1,6 x 7 - width: 1600 mm - length starting from cutting line: +- 7000 mm - speed: 170 m/min - power: 2x 15kW - weight: 4,2 ton 10) Soenen Stacking unit Type MTB1,6 x 3D - min/max width: 250/1600 mm - min/max length: 300/6000 mm - min/max thickness: 0,3/4 mm - max stackingcapacity: 4000 pieces/hour - transportspeed: 180 m/min - weight: 21 ton Workwidth x sheetthickness: 1600 x 4 mm Straightner: no Shear: yes

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm Fgslev Svbieq Eg Tqjb speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable with motor, manual expansion, coil loop control

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Folshhyzcjq Eg Tqjgb Coil width 1250 mm Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Condition: used, Year of construction: 2019, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20117 2019 Sandvik DX800I Drilling Rig with GPS and CME Grinder Model year: 2019 Hours: Approx. 8900 hours (can increase) Stroke hours: Approx. 3370 hours Weight: Approximately 20,000 kg New belts: May 2023 Chassis: See pictures Leica GPS CME grinder Vacuum cleaner Winch Mounted larger hammer RD 925 (October 2023, cost 391,000 NOK) New belt drive (June 2024) New hydraulic tank (December 2024) Remote control Radio/CD Air conditioning/AC Ready for delivery Description: Well maintained Sandvik DX800I drilling rig from 2019, with approx. 8900 hours. The rig has received significant upgrades in the last two years, including new hammer RD 925 (October 2023), new tracks (May 2023), new track gear (June 2024) and new hydraulic tank (December 2024). All services have been followed up, and maintenance is in order. Fitted with Leica GPS, CME grinder, vacuum cleaner, winch and remote control. Ready for delivery! Fgelq Eg Tswdu Hasqeb Total Weight: 20000

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm Folq Eg Tjv Svaxjqogb speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound