Used International 1055 for sale (9,428)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle on time by May 30, 2025. Disassembly and loading available for an additional charge. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system Dkeb E Tb Iowgbx Ujnel External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. Service providers can be arranged. Price: approx. €8,000

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system Djbowc Shfe E Tb Inokl - Chip conveyor - Manuals

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Deb E Tb Ijwc T Aqonskl Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Djb E Tewd R Nwjb Inokl Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL total power requirement 45 kW Dkjb Eov Ehbbs Tb Insl weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, bale weight: 273 kg, machine/vehicle number: X0721-016, GPS GREAT SCRAP PROCESSING SOLUTIONS BALER Dkeb E Tb Ijwc U Axsnel Fully automatic two compression baler for production of high-density bales. This baler will produce a very high-density bale and is suited for both ferrous and non-ferrous scrap. 2021 G.P.S. Great Scrap Processing Solutions Model: 80 2C XL Automatic Baler, 400-480V, 3-PH, Total Install Power: 110 kW, Working Pressure: 280 Bar, First Compression Cylinder (Thrust): 140 t, Side Cylinder (Thrust): 140 t, Machine Noise Level:

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Djb E Tberualpo Inskl Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Djb E Tbewhwhbe Injkl Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Year of construction: 1997, Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum load 280kgs, maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Dob E Tbjiwyr Aj Inokl

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swivel axis: 101° BT axis: 0 – 180° V-axis within work area: -40 to -496 mm V-axis outside work area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Turning spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Driven tool speed: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-station with driven tools Tool changer: 32-station Additional magazine: 64-station Dsb E Tbewd R Exj Inekl MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation dimensions (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, built in 2014 - Tool measuring system - Internal cooling system with 70 bar internal cooling - Driven safety door - Technical documentation - Manual - Continuously adjustable speed - Transport on a standard truck possible

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Dob E Tb Isrtrvyonokl Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Used Matcon approximately 1,000 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 500mm deep with a 500mm deep conical bottom. Unit mounted on forkliftable base. Includes internal discharge cone. Dkjb E Tb Ijun Syvjnsl

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 10700049, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 320 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 14, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 320 mm Table Table length: 500 mm Table width: 350 mm Dsb Eewd Sp Sj Tb Inekl Table clamping area: 450 × 300 mm Table load: 150 kg Number of T-slots: 3 T-slot spacing: 100 mm Spindle Spindle speed: 10,000 rpm Tool holder: SK 30 / BT 30 Spindle cooling: 25 bar internal cooling Rapid traverse and feed rate X-axis rapid traverse: 48 m/min Y-axis rapid traverse: 48 m/min Z-axis rapid traverse: 36 m/min Working feed rate: 12,000 mm/min Tool magazine Tool changer: 14-station Tool holder included: 20 × SK 30 Max. tool diameter: 90 mm Max. tool length: 200 mm Max. tool weight: 3 kg Chip-to-chip time: 2.8 s MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connected load: 15 kVA Weight: 2.4 t EQUIPMENT - GRUNDFOS coolant pump - Cooling unit - 20 SK 30 tool holders included

Condition: used, Year of construction: 2015, machine/vehicle number: 25600, rotational speed (min.): 30 rpm, grinding wheel speed: 17,000 rpm, grinding wheel diameter: 300 mm, overall weight: 29,000 kg, grinding wheel width: 60 mm, table diameter: 930 mm, Equipped with: Siemens Sinumerik 840D Control Extended 1500 mm Gear Diameter Extended Working Stroke (Y Axis) 1500 mm CNC Dresser Prepped for Internal Grinding BfG Best-Fit Grinding Software High Speed Grinding Steady Rest Onboard Inspection (Profile, Lead, Spacing) Upgraded Inspection for Scanning/Digital Measurement Hydraulic Clamping System Profile & Lead Modifications Double-Helical Grinding Grind from Solid Root Grinding Hydraulic Unit Lubrication System Chiller Specifications: Operating Range: -Maximum Gear Outside Diameter: 1,500 mm -Maximum Stroke Length: 1,500 mm -Maximum Stroke Length of Tailstock: 1,500 mm -Minimum/Maximum Center Distance Above Table: 500 - 2,000 mm -Minimum Module: 0.5 Dkjb Eevggwws Tb Insl -Maximum Pivoting Angle: -45 / +120 Degrees -Maximum Grinding Spindle Drive Power: 38.5 kW -Maximum Grinding Wheel Outside Diameter: 300 mm -Maximum Grinding Wheel Width: 60 -Maximum Stroke Speed: 12,000 mm/min -Minimum/Maximum Workpiece Table Speed: 0 - 30 RPM -Maximum Workpiece Table Load: 8,000 kg -Workpiece Table Diameter: 930 mm -Total Weight, Approximate: 29,000 kg -Space Requirement (width x depth x height): 5,2 x 6,9 x 3.6 m

Condition: like new (used), Year of construction: 2000, Used Kemutec Kek model 200 EC Stainless Steel Jacketed Ribbon/T-Arm Mixer. Has approximately 200 litre working capacity and 215 litre total capacity. Mixing trough approximately 565mm diameter X 860mm long. Has hinged lid and end cover. Internal rated atmospheric pressure at 50 degC. Cantilever design with bolted double ribbon mixing blade belt driven by 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 reduction ratio at approximately 53 rpm. Includes spare double ribbon and t-arm mixing blades. Has provision for chopper but none fitted. Includes centre bottom discharge with valve. Has stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. Mounted on mobile base. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Dksboiwytcj E Tb Insl

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m Deb E Tbjwd Nwyo Injkl EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Deb Esrtryyo Tb Inekl Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Dkjb E Tbjtz Thbo Injl Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle Deb E Tb Iortrzdsnjkl (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Used Stainless Process Systems approximately 50 litre (13 US Gallon) stainless steel vertical reactor. Unit measures approximately 500mm diameter x 300mm straight side. Unit has welded dished bottom and clamped dished top head. Internal originally rated 75psi (5.17bar) maximum allowable working pressure at -20 to 350 deg.f. (-28 to 176 deg.c.) Unit re-rated in 2015 to 100psi (6.89bar) maximum allowable working pressure at 350 deg.f. (176 deg.c.). External stainless steel jacket rated 90psi (6.20 bar) / full vacuum maximum allowable working pressure at 350 deg.f. (176 deg.c.). Unit has bottom entry Steridose magnetic coupled agitator driven by Baldor 0.37hp, 1730rpm electric motor. Unit includes local control panel. Mounted on mobile stainless steel trolley. Dob E Tjun S Hpjb Inokl

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Dksbertrxij E Tb Inel Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Used Bibby approximately 3,00 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1,980mm tan to tan x 1,400mm diameter. Unit has welded dished top and bottom heads. Internal rated 3.61 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-set 2-tier, 3-blade agitator with Lightnin model LS150 drive. Unit is mounted on side supports. Dkjb Eeun Sw Ij Tb Inel

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Dob E Tb Ieun Sxrenjkl

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Dob E Tbsun Sycs Inekl

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Dkjb E Tb Iotz Tgqjnsl Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs.