Used International 955 for sale (9,685)

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Cobvpovvx Dzep Nkjrb Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, operating hours: 5,190 h, Field of application: Internal logistics Please contact ATS Norway AS for more information Cebvpp Nsvgym Sskerb Please provide reference number upon request: 18995 Specifications: Model year: Unknown (before 2000) Max lifting height: 3.5 m Max lifting capacity: 3,000 kg Weight: 4,680 kg Hours: Approximately 5,190 Diesel Tires: See pictures for details Twin front wheels Videos Services performed by owner Delivery: By arrangement Description: This forklift, with a maximum lift height of 3.5 meters and a lifting capacity of 3,000 kg, is used in the workshop and in daily operations. The owner is unsure of the model year, but states that it is from before 2000. It has twin front wheels and a diesel engine, and has run approximately 5,190 hours. Delivery can be arranged as needed. Hours: 5190

Condition: excellent (used), Year of construction: 2019, total height: 4,532 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, power: 210 kW (285.52 HP), overall weight: 23,000 kg, space requirement length: 13,480 mm, space requirement width: 10,502 mm, CONTROLS .. CNC controls SIEMENS 840 D SL DIMENSIONS / WEIGHTS .. space requirements -left/right-: 13480 mm .. space requirements -front/back-: 10502 mm .. total height: 4532 mm .. total weight approx.: 23000 kg ELECTRICAL SPECIFICATIONS Cjbvpjv Hglbop Nkjrb .. total power consumption: 210 kW .. mains voltage: 400 V .. mains frequency: 50 Hz asic machine system with 10 stations Station 1: Component loading (multi-axis handling) Station 2: Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling (max. 15,000 rpm) Station 3: Sauter 112 crown turret (3 spindle units) HSK 40 with external cooling 1 SEMA AE2-35/50/NC 2-axis unit Station 4: 1 SE – HSK 50C spindle unit including internal cooling (max. 15,000 rpm) Station 5: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling Station 6: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling 1 SEMA 2-axis unit AE1-35/50/NC Station 7: 1 hydraulic docking unit including C-axis positioning unit (1 2-axis unit SEMA AE1-35/50/NC) Station 8: 1 hydraulic docking unit including C-axis for positioning 1 permanently integrated angle head Benz or equivalent Station 9: 1 2-axis unit SEMA AE3-35/50/NC Station 10: Permanently integrated angle,S-35/50/NC Station 11: Blow-off inside/outside

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Crebjwhfb Njvpp Nksb Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: used, Year of construction: 2019, total width: 1,850 mm, total length: 5,790 mm, total height: 1,500 mm, Weight: 1.750 kg = Rinaldi TDF55 Double Aluminium Mitre Saw = Crsbowf Uuyovpp Nkeb ⚙️ Technical Specifications - Power Supply: Three-phase, 380/400V – 50/60Hz - Motor Power: 2.2 kW - Saw Blade: Ø 550 mm, 2850 rpm - Saw Head Positioning Speed: 25 m/min - Maximum Cutting Length: 4000 mm - Minimum Cutting Length: - 135°: 200 mm - 90°: 300 mm - 22.5°: 200 mm - Mitre Angles: - External: 90° to 22.5° - Internal: 90° to 135° - Weight: 1750 kg 🛠️ Key Features - CNC control via industrial PC (Windows 10, 12.1" touchscreen) - Oleopneumatic saw feed with 15° inclination - 4 horizontal and 2 vertical pneumatic clamps - Pneumatic impulse lubrication system - Dust extraction connection (Ø100 mm) - USB 2.0 and RJ45 Ethernet ports - Multiple cutting modes: single cuts, undercuts, overcuts, etc. 📦 Standard Equipment - 2 carbide-tipped saw blades (Ø 550 mm) - Adjustable feet, air gun, service tools - Pneumatic clamps: Yes - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: 215439 - Transport dimensions: 5790mm x 1850mm x 1500mm (l x w x h) - Transport weight [kg]: 1750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Cobvppjwgkfde Nkjrb Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press is expected to be in operation until May 16, 2025, and can be inspected in operation upon request. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by arrangement. Sales against advance payment are ex works, without warranty or guarantee.

Condition: like new (used), Year of construction: 2019, operating hours: 46,212 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC-640 with CELOS, workpiece length (max.): 600 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 800 kg, table load: 1,500 kg, rotary table diameter: 630 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,376 h, number of slots in tool magazine: 180, tool length: 365 mm, tool weight: 8 g, Equipment: chip conveyor, CNC control: Heidenhain TNC-640 with CELOS Axes X-axis travel mm: 935 Csbvpp Nowgiphekjrb Y-axis travel mm: 850 Z-axis travel mm: 650 C-axis degrees: 360° (0.001) A-axis degrees: +120° to -120° Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in axes m/s2: 6 Work table Number of pallets: 6 Table dimensions mm: 630 Maximum workpiece size (D x H) mm: 800 x 600 Maximum workpiece weight kg: 800 in APC - 1,500 in workarea T-Slot version: DIN - 55201-A2 Spindle Spindle speed rpm: SpeedMaster 20 - 20. 000 Spindle power kW: 35 / 25 Spindle torque Nm: 130 / 86 (40%/100% DC) Tool system Tool holder: HSK-A63 Tool magazine positions: 180 With free adjacent positions mm: 200 With occupied adjacent positions mm: 80 Max. tool length mm: 365 Max. tool length mm: 365 of tool mm: 365 Max. tool weight kg: 8 Equipment Electronic handwheel Chip extractor Internal coolant lubricant supply Flushing gun Operating mode 4 Mist collector 3D quickSET Precision package Air blowing through spindle center, selectable via M function MPC - Machine Protection Control Temperature compensation Paper belt filter RENISHAW OMP60 CE Blum laser tool measurement Production package Rotating viewing window with laminated glass Round pallet Stor 10 - 80 Tank capacity liters: 980 L Machine operating times Under voltage: 46. 212 Operating Time: 10.376 Rated power kVA: 78 Basic machine dimensions / weight Length mm: 5.063 Width mm: 5.093 Height mm: 3.153 Weight kg: 12.300

Condition: used, Year of construction: 2022, Serial number: SA9FT4A55MH17xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19594 Specifications: Cobvevyfq Nepp Nkjrb - 2022 model - 4 axles - Tires (see pictures) - Pull out on the drawbar - Internal total length: 8,843 m - Inside mlp scene 1: 2,748 m - Inside mlp scene 2. 5,780 m - Lift on 3. axle - Swing on 1st and 2nd axle - Ready for delivery Drum brakes Description: The machine trailer is in good condition according to the owner. Everything works as it should. Ready for delivery Technical approved: Yes EU-approved until: 06.02.2026 Own weight: 8600 Total Weight: 36000 Payload: 27400 Width: 254 Length: 1205,5

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand SIEMENS Model 840d Solutionline Main Drive Number of spindles 1 Cjbvpp Njwg Ifhokorb Spindle speed range 20 to 24000 rpm Number of axis 4 Movement X-Axis Movement 700 Y-Axis Movement 420 Z-Axis Movement 380 Table Outer length 840 mm Outer width 420 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool holder ISO7388-2 J30 Tool changer 25 places Additional tank 600l Oil and emulsion mist separator This DMG MORI DMP 70 with WH3 Vertical Machining centre was manufactured in the year 2021. It is equipped with a DMG MORI control unit. The machine disposes of a spindle with a speed range of 24000 rpm, a internal cooling system and a chip conveyor. Contact us anytime for further questions. Application Types Milling

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Crjbvppewg Hrgs Nkeb Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: used, Year of construction: 2005, operating hours: 7,863 h, 2005 | Manitou | Manitou 160 Atj (16 meters) | Used Articulated Boom Lift | 7863 hours 📍Location: France, Gannat 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 18000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 47 inspection points 46 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good working condition, with a little play in all joints. The motor was replaced 2000 hours ago. See details below. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37955 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery Crebvpp Nswgga Dskob ❓Got machines to sell? Contact us for a free evaluation

Condition: ready for operation (used), Ebmpapst BCI 63.55 SK 550 0760 08 Brushed internal rotor motor 24V 00004 + BCI 63.55 9316355023 Angular gearbox 24VDC 00009, used, as new condition, 100% functional, scope of delivery as per photos Crsbeu T Uvcevpp Nkob

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Crsbvpsuyialsp Nkjb

Condition: used, Year of construction: 2012, Serial number: SZFTN1490CLD0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20131 Specifications: - 2012 model - Eu-approved until: 19.10.25 - 3 Axles - Movable wall - Air suspension - Raise and lower function - Tires (see pictures) - Internal length: 6.608 m - Internal width: 2.495 m - Lashings - Ready for delivery Description: We have a 2012 Istrail 3 axle flatbed trailer for sale. Crjbvppowdvc Ne Nkeb The trailer is Eu-approved until 19.10.25 Is in daily use and functions as it should according to the owner. Ready for delivery Technical approved: Yes EU-approved until: 19.10.2025 Own weight: 6410 Total Weight: 27000 Payload: 20590 Width: 255 Length: 945

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) Csbvppowgan Us Nkjrb 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: good (used), roller conveyor, conveyor track, roller conveyor belt, roller conveyor, pallet roller conveyor -Roller conveyor: 45 sections, 39 x 2.39 m / 6 x 2.79 m Cebev I Rc Tevpp Nkjrb -Brake roller: Distance every approx. 1.3 m -Total length: approx. 110 m -Roll width: 855 mm -Rollers: Ø 60 mm -Roller spacing: 150 mm, see photos -Dimensions: 2390/955/H90 mm / 2790/955/H90 mm -Price/Delivery: complete -Base: various heights in stock, see ID 35351 to 35358 -Transport dimensions: mm (4 pallets) -Total weight: 3357 kg

Condition: new, Year of construction: 2025, NEW Mobile loading and unloading ramp with a load capacity of 10T. Technical parameters: 1.) Load capacity 10T 2.) Internal width 2.0m - external width 2,1m 3.) Length 11.3m 4.) Total weight 2.9T 5.) Height adjustment 1.1-1.8 m 5.) Fork holder for the ramp transport truck 6.) Transport wheels 7.) Plumbing The ramp floor is made of BRIDGING GRILLE, which is GALVANIZED!!!. the grating is a great advantage of this ramp, unlike ramps that have a floor made of sheet metal and steel mesh or bars placed on it. the wheels of the forklift do not slip on the ramp, and they clean themselves during the drive, which means that the floor of the loaded container or truck is not contaminated with mud or snow. ​ Crjbjrqfq Esvpp Nksb

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet Crsbvpjwgch Djp Nksb All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Crebvpp Neqhkkzekob

Condition: used, Year of construction: 2013, Serial number: YG9511307D303xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20105   3 axles Lift on axle 1 Swing on axle 3 Good condition with tires, see pictures Air suspension Standard height inside 410-450 cm in height Interior length 1347 cm Internal width 247 cm Total length 1385 cm Wheelbase 136/255 cm Width 255 cm Ready for delivery Csbvpp Newdvkmokjrb Technical approved: Yes EU-approved until: 19.09.2025 Own weight: 9900 Total Weight: 45000 Payload: 35100 Width: 255 Length: 1385

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Crebvppjwf Dzvj Nksb Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Cebsqhkktovpp Nkjrb

Condition: used, mileage: 475,000 km, Year of construction: 2004, Serial number: YS2P6X2000200xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19577 Specifications: - 2004 model - Mileage: 475,000 - Wheelbase: 450 cm - Spring: air - Engine brake - Tires (see pictures) - Automatic - Radio - AC/climate - Video available - Ready for delivery Inc tipperbox Description: 2004 Scania P114 crane lift. The truck has covered around 475,000 km. Video exists. Ready for delivery. Km: 475000 HK: 380 Technical approved: Yes Crebov Nqnfovpp Nkeb EU-approved until: 04.06.2025 Own weight: 9900 Total Weight: 28500 Payload: 18525 Width: 255 Length: 955 Euro: 3

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Crebvpencdx Nsp Nkjb

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Csbsncdx Eevpp Nksrb