Used International 744 for sale (9,738)

Condition: used, mileage: 780,000 km, Year of construction: 2010, Serial number: YV2J1D1A8AA69xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18367 Specifications: - 2010 model - Km: approx. 780,000 - Gear: ishift - Tires (see pictures) - Inside length: approx. 760 cm - Internal width: approx. 245 cm - Internal height: approx. 270 cm Bsbvqevgx U Ue Aq Towl - Two sets of tires - Full side opening - 2000 kg Zepro lift - Euro 5 - Length: 1,030 cm - Width: 255 cm - Wheelbase: 560 cm - Net weight: 10,150 kg - 4x2 - 337 hp - Tool box - Extra lights - Damage to mirror, see pictures - Rust, shown in pictures - Bed - Radio/cd - Climate/ac Description: 2010 Volvo FM 330 cabinet truck with full side opening and lift. The truck comes with two sets of tires. It has recently had a 2-year check on the printer. Can be delivered within a short time. Km: 780000 HK: 337 Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 10150 Total Weight: 10225 Payload: 9275 Width: 255 Length: 1030 Euro: 5

Year of construction: 2008, Condition: excellent (used), Drying Oven Cefla Typ:Aquadry LA/6 TT 10000 Serie no:10063/04 Serie no:10063/05 Year:2010 Aquadry LA is the best in-line system for drying water-based paints Description This combined in-line system associates the effectiveness of high speed hot air and high radiation capacity IR lamps. It is the most efficient system for drying water-based paints, because it cuts the times needed to evaporate any water contained in the finishes. The hot air ventilation creates a high flow-rate area. The optional infrared lamps can have differential wavelengths and penetration depths. Features flexible choice of hold times thanks to oven's modularity; short flash-off or total drying times; user-friendly operation and low maintenance; low initial investment costs; no emissions and/or radiation in the working environment. Application Fields -Panels Bwsbvqeiwuq He Aq Tol -Flat panerls - Raised or curved panels -Internal matchboard -Flat doors - Raised doors - Indoor furniture -Corrugated roof panels and sheets -Furniture components - Packaging -Interior components Materials - Fiber cement and composite -Metal - Plastic - Wood and wood-based materials Inlet fans capacity 12000m3/h Inlet fans power 11kw Exhaust fans capacity 5000m3/h Exhaust fans power 1,5kw Heating units output 135,000 Cal/tim NIR lamps power 4,2/8,5 kw IRM lamps power 1,2/2,5/3,5 kw IRCK lamps power 3/6kw TL lamps power 40/140 w Maximum sound level 74,5db Compressed air 4-5 bar Length 10500 + 10500mm Width Hight Weight 1700+1700 Kg Stock no:2001395BXAHED NOTE: The above specifications may vary depending on the machine version

Condition: new, Functionality: fully functional, machine/vehicle number: 6SE01001AC237AA7, overall weight: 30 kg, total length: 800 mm, total width: 400 mm, total height: 450 mm, protection type (IP code): IP20, Frequenty converter / AC Drive Sinamics G180 6SE01001AC237AA7-Z Year 2015 Nw/unused Bwjbvq Aswhbtueq Tel

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Bobvq Aqowhdhzs Towl Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Bwebvqev D R A Ss Aq Tjl Application Types Milling

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwobvq Aqowhf Ngs Tel Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2002, Field of application: Internal logistics Serial number: 3FD35-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19534 Specifications: - 2002 model - Services taken by owner - Lifting height of 5200 mm - Weight 5740 kg - Lifting capacity of 2600 kg - Diesel - 120 cm forks - Ready for delivery Description: Toyota truck with lifting capacity of 2600 kg Lifting height is 5200 mm. A little engine oil is dripping from the engine. Otherwise, it functions as it should, according to the owner. Video included. Delivery by appointment Total Weight: 5740 Bebvqjvyftqe Aq Tswl

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Bwobeq Ehpasvq Aq Tjl Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: new, Year of construction: 2024, fuel type: electric, lifting capacity: 2,000 kg, net weight: 109 kg, This new electric pallet truck from mer WELDON has a capacity of 2,000 kg;Forks 1150 mm;Super compact, weighs only 109 kg;Equipped with a 48v 10Ah Lithium battery and INTERNAL charger;Pick up yourself or delivery for an additional charge;Order in our webshop or visit us for a test drive. Bobvq Aqjv E H Hij Tewl

Condition: used, mileage: 130,000 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2011, emission class: euro5, color: silver, number of seats: 3, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Quickly and easily contact our sales advisor Internal ID number: [ 2585 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * 19% VAT deductible * German vehicle * 1st owner * Accident-free * Regularly serviced * Euro 5 standard * Glass van (removable upon request) * Special features: Windows in the cargo/vehicle compartment: - fixed, 1st row right, rear wing doors with glass, high cargo partition behind driver and passenger, with window (deformed for driver's seat backrest), metallic paint, Visibility Package 1. Additional features: Driver's side airbag, 6000 audio system (Radio/CD player), turn signal integrated into exterior mirror, dual locking system, tachometer, electronic differential lock (EDL), driver assistance system: hill start assist, rear wing doors (opening angle 180 degrees), heating with recirculation, body variant: high roof, headlight range control, engine: 2.2 liter - 85 kW TDCi CAT, production facility: Otosan, wheelbase 3750 mm, full wheel covers, sliding door for the right-hand cargo/passenger compartment, mud flaps front and rear, side protection strips, Seat Package 22: driver's seat (3-way adjustable) - passenger seat, tinted glass, hardboard trim in the cargo/engine compartment. ---- Looking for leasing or financing? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Bwobjwg S Erjvq Aq Tol Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Bsbvq Aqevg At Ue Tswl Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Bebeq H Spvjvq Aq Towl Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: good (used), operating hours: 1,109 h, fuel type: electric, mileage: 1,109 km, lifting capacity: 1,300 kg, net weight: 200 kg, Electric pallet truck from the Jungheinrich brand is in good condition1,109 hours on the counter;Very compact and weighs only 200 kg;Forks 1150 mm Euro pallet size;Capacity is 1,300 kg;Equipped with a LION battery with INTERNAL charger;Order the pallet truck in our webshop or make an appointment for a test drive. Bebvq Ajv Imh Seq Tewl

Condition: used, mileage: 75,000 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2020, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat now via WhatsApp: Contact our sales advisor quickly and easily Internal ID number: [ 2565 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Special features: Trailer hitch, air conditioning, rear view camera, multimedia display, rear parking aid with rear view camera, wooden flooring in the cargo area, Clear View package, Mobile Office package 1, full wheel covers, trim in the cargo/passenger compartment. Additional features: Driver's side airbag, anti-skid control (ASR), electric exterior mirrors. Adjustable and heated, 85 Ah battery, on-board computer, tachometer, automatic headlight activation, no keyless entry, glove compartment with cooling function, rear wing doors without glass, interior filter: pollen filter, body/structure: van, fuel tank: 80 liters, adjustable steering column (steering wheel), facelift, 2.0-liter - 88 kW dCi Diesel Energy engine, rear fog light, radio preparation, wheelbase 3098 mm, tire repair kit, low emissions according to Euro 6d-TEMP emissions standard, full-LED headlights with LED signature C, sliding door for cargo/passenger compartment on the right, seat cover/upholstery: fabric, seats in the cab: 3-way adjustable comfort driver's seat, engine start/stop system, LED daytime running lights, lashing eyes in the cargo area on the side, lashing eyes on the cargo area floor, preparation for electrical system on the body, heat-insulating glazing. ---- Would you like leasing or financing? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening Hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ---Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are subject to change. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers. Bsbswg S E Sjvq Aq Tewl

Condition: used, mileage: 332,670 km, Year of construction: 2015, Serial number: VF6MFF5VR5352xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17322 Specifications: - 2015 model - 332,670 km - Eu approved to 08.11.2025 - Euro 5 - 150 Hp - 2 seats - Automatic transmission - Cruise control - Rear view camera - Internal width: 1,741 m - Internal length: 3,602 m - Internal height: 1,867 m - 1970 kg Net weight - Service history - Climate/ac - Light - Radio - Video - Delivery by agreement Description: All services taken at brand dealer. Everything works says the owner. Bobvqjvg R Dns Aq Tewl Delivery by agreement Km: 332670 HK: 149 Technical approved: Yes EU-approved until: 08.11.2025 Own weight: 1970 Total Weight: 3500 Payload: 1455 Width: 207 Length: 619,8 Inside width: 1741 Inside lenght: 3602 Inside hight: 1867 Kw: 110 Euro: 5 Gearbox: Automatic

Condition: like new (used), Year of construction: 2015, operating hours: 7 h, fuel type: electric, mileage: 7 km, lifting capacity: 1,800 kg, This electric pallet truck from the GERMAN brand STILL comes from 2015;The pallet truck has a capacity of 1,800 kg;The pallet truck has a battery from 2015 with an automatic filling system Equipped with an INTERNAL charger ONLY 7 hours on the counter;Spoons 1,000 mm, suitable for small spaces and in the truck Make an appointment for a test drive or order the pallet truck in our webshop. Bwebvjvm A S Djq Aq Tel

Condition: used, Year of construction: 2013, Serial number: WSJTKS324DTJ2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19134 Specifications: - 3 axle - Lift on 1 - Suspension: Air - 33 pallets - Inside length: Approx. 13.3 m - Internal width: Approx. 2.5 m - Internal height: Approx. 2.85 m Bwsbvqsvgz Ano Aq Tel - Carrier cooling/freezer unit - Good tires Description: Krone Cool Liner with cooling/freezer unit. Good tires and 33 pallets. Ready for delivery. Technical approved: no EU-approved until: 20.06.2024 Own weight: 9550 Total Weight: 45000 Payload: 35450 Width: 260 Length: 1379

Condition: used, mileage: 180,000 km, Year of construction: 2021, Serial number: W1T9630201051xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17610 Specifications: Bwebvq Asvgy Enoq Tjl - 2021 model - Km: approx. 180,000 (will ke) - Suspension: Air - Automatic - Tires (see pictures) - Retarder - Carrier cooling/freezer unit - Zepro lift - Side door - Inside length: approx. 825 cm - Internal height: approx. 250 cm - Net weight: 13,320 kg - Euro 6 - Reversing camera - Extra lights - Compressor horn - Tool box - Radio/cd - Climate/ac - Service history Description: 2021 Mercedes Actros 4x2 box truck. Tarfurgo cabinet with Carrier fridge/freezer unit. The truxk has a service agreement and is ready to be put into operation. Delivery by agreement. Km: 180000 HK: 428 Technical approved: Yes EU-approved until: 06.08.2025 Own weight: 13320 Total Weight: 27000 Payload: 13605 Width: 260 Length: 1086,5 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2022, Serial number: WKVDAF3030011xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19622 Specifications: - 2022 model - Air suspension - Tires (see pictures) - Lift on row 1. - Turn on 3. - Liftable roof - Internal length: approx. 1,367 cm - Internal height: approx. 278 cm - Wheelbase: 131/181 cm - Weight: 7,880 kg - Tool cabinet Description: 2022 Kaessbohrer Curtainsider with liftable roof. It is lift on 1st and turn on 3rd. It is ready to be put into operation. Can be delivered within a short time. Bebvq Aqsvyfhnj Tswl Technical approved: Yes EU-approved until: 20.04.2026 Own weight: 7880 Total Weight: 45000 Payload: 37120 Width: 255 Length: 1385

Condition: used, mileage: 200,000 km, Year of construction: 2021, Serial number: ZCFA875F40271xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18743 Specifications: - 2021 model - Km: approx. 200,000 - 4x2 - 2021 Hiab Zepro lift - Tires (see pictures) - Suspension: Steel front, air rear - Retarder - Side door on box - Norwegian cabinet - Internal width: Approx. 2,470 m - Internal length: approx. 6 m - Internal height: approx. 2,353 m - External height: approx. 3,459 m - Wheelbase: 418.5 cm - Automatic - Tool cabinet - 3 seats - Climate/ac - Radio - Service history is available Bebvq Aqjvgzw So Tswl - Ready for delivery Description: 2021 Iveco box truck with zepro lift. The truck has been kept in good condition and has been serviced at a specialist workshop. The box is very good (see pictures). Ready for delivery. Km: 200000 HK: 207 Technical approved: Yes EU-approved until: 27.09.2025 Own weight: 4990 Total Weight: 7500 Payload: 2435 Width: 255 Length: 810 Inside width: 2470 Inside lenght: 5997 Inside hight: 2353 Outer total height: 3459 Kw: 152 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 248,000 km, Year of construction: 2016, Serial number: YV2V001A4GZ10xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18307 Specifications: - 2016 model - Km: approx. 248,000 Bebvq Aqevgziue Towl - Transmission: automatic - Fresh air - Tires (see pictures) - Full page opening - 2500 kg Zepro lift - 20 pallets cabinets - Internal length: approx. 806 cm - Internal height: approx. 260 cm - Internal width: approx. 251 cm - Euro 6 - Length: 1,181 cm - Width: 260 cm - Wheelbase: 610 cm - Net weight: 10,300 kg - 4x2 - 326 hp - Bed - Radio/cd Description: 2016 volvo FE 320 with 20 pallet cabinets. It has full side opening and a 2500 kg Zepro lift. Can be delivered within a short time. Km: 248000 HK: 326 Technical approved: Yes EU-approved until: 23.09.2025 Own weight: 10300 Total Weight: 19500 Payload: 9125 Width: 260 Length: 1181 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 388,000 km, Year of construction: 2008, Serial number: VF629AHA00000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18445 Specifications: - 2008 model - Km: approx. 388,000 (want anything) - Suspension: Air - Gear: manual - Tires (see pictures) - Full side opening - 2000 kg Zepro lift - Inside length: approx. 762 cm - Internal height: approx. 261 cm - Internal width: approx. 245 cm - Net weight: 9,650 kg - 4x2 - 320 hp - Reversing camera - Extra lights - Tool box - Bed - Radio/cd - Climate/ac - Services taken by owner Description: Bjbvq Aqevgxwcs Tewl Renault premium cabinet truck from 2008. It has full side opening and a 2 tonne lift. Gearbox and clutch were changed around 200,000km. Can be delivered within a short time. Km: 388000 HK: 319 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 9650 Total Weight: 19000 Payload: 9275 Width: 255 Length: 1005 Euro: 4 Gearbox: Manual

Condition: used, mileage: 334,062 km, Year of construction: 2001, Serial number: YV2E4CBA31B29xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18503 Specifications: - 2001 model - 334,062 km - Eu-approved until 16.08.25 - Euro 2 - Engine brake - Manual transmission - Century superconstruction - Ramsey winch - Cradles - Internal width plan: 2,200 m - Internal length plan: 5,664 m - Climate Bwsbvovgx E Tjq Aq Tsl - Light - Radio - Delivery by agreement Description: Volvo FL6 is sold with cradle and winch. Everything works as it should according to the previous owner. The truck starts very easily, and there is a service history. Delivery by agreement. Km: 334062 Technical approved: Yes EU-approved until: 16.08.2025 Own weight: 6300 Total Weight: 7490 Payload: 1115 Width: 250 Length: 790 Euro: 2 Gearbox: Manual

Condition: used, Year of construction: 2010, Serial number: XL9KRAKER1006xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18431 Specifications: - 2010 model - Air suspension - Tires (see pictures) - Length: 1,401 cm - Width: 255 cm - Wheelbase: 131/181 cm - Net weight: 10,500 kg - Inside length: approx. 1,349 cm Bobvqjvgywde Aq Tjwl - Internal height: approx. 270 cm - Tool box - Can be delivered within a short time. Description: Kraker walking floor from 2010. Delivery by agreement. Technical approved: no EU-approved until: 10.04.2025 Own weight: 10500 Total Weight: 45000 Payload: 34500 Width: 255 Length: 1401

Condition: used, Year of construction: 2019, Serial number: YF2T36SFGKKN3xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18721 Specifications: - 2019 model - EU-approved until 02.06.2025 - 3 axle - Full side opening - Wheelbase: 132/132 cm - Payload: 33,020 kg Internal measurement: Height: 3.03m Bwsbvq Asvg Aguoq Tsl Width: 2.50m Length: 13.40m Outside measurement: Length: 13.80m Height: 4.30m Width: 2.60m Description: 2019 Ekeri cupboard hanger with full side opening. The cupboard hanger is Eu-approved. Delivery by agreement. Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 8980 Total Weight: 42000 Payload: 33020 Width: 260 Length: 1380 Inside lenght: 1340