Used International 633 for sale (9,582)

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 7000 mm Measurements depth 6000 mm Measurements height 4000 mm Machine weight 15000 kg Control Unit Model TYPE 3 OSA Brand BOSCH Main Drive Spindle speed range 12,000 min/-1 Spindle motor power 30 kW Number of axis 3+2 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 1100 mm Z-Axis Rapid Traverse 30 m/min Tools Type of tool holder HSK 63 A Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant system: Internal coolant supply 70 bar // Cooling unit for switch cabinet Paper belt filter Flushing gun Chip conveyor: Ejection height 1200mm Fohx A Rewc Ev Neq Degb 3D radio measuring probe Direct measuring systems x-y-z This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time. Application Types Milling

Condition: used, - Dimensions (LxWxH): 560x925x1430mm Fshxswgdxwe A Rq Degb - Model: Hercules 15 - Output: 100L per hour - Minimum output per cycle: 12kg - Maximum output per cycle: 20/24kg - Condensation: Water - Large-capacity production cylinder, internal diameter 30cm x depth 43cm - Power: 7kW - Voltage: 400V - Weight: 210kg

Condition: used, mileage: 24,400 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 09/2019, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 85527A The vehicle is located at our location 34497 Korbach, Frankenberger Landstraße 7.   Equipment lines and packages * ES5 charging package instrument panel * Z30 scope of delivery Bundeswehr (BW) Exterior * IT4 3.5 tonner * GD8 6-speed manual transmission ECO Gear * Towing eye at the rear * K53 AdBlue filler cap lockable * Display for washer fluid level * W73 rear door step * Electric outside mirror. adjustable and heated - both * F64 exterior mirrors, electrically foldable * F68 exterior mirrors, heated and electrically adjustable * FU5 exterior mirrors without indicators * RG8 tires 225/75 R16 C * L44 indicators on the front side * roof paneling in the driver's cab * third brake light * E57 electrics for trailer socket * M49 generator 14 V / 180 A * 6-speed gearbox - TSG (Eco Gear) * T77 grab handle for loading area sliding door on partition * KB7 main tank 93 liters * W54 rear doors, two-wing, opening to the side wall * Body/structure: box * ZM0 panel van * Fuel tank: main tank 71 liters * CN2 radiator grille frame in vehicle color * RM1 M+S tires * Wheelbase 3665 mm * RF1 tire brand Continental (10) * RM9 tire brand special request * R87 spare wheel * R65 spare wheel holder under frame end * Sliding door loading/passenger compartment right * T16 sliding door right * SCR system (AdBlue technology) * LB1 side marker lights * RS3 steel wheels 6.5 J x 16 * E46 socket in driver's cab * Daytime running lights * Fleece battery 70 Ah * ED1 Fleece battery 12 V/70 Ah * H20 heat-insulating glass all around * Perm. Total weight 3.50 t Interior * Storage compartment above the windshield * FJ4 Storage compartment under the cockpit * Storage compartment below the dashboard on the passenger side * FF5 Storage compartment above the windshield * S22 Armrest for driver's seat * F3F Passenger-optimized gearshift console * S23 Two-seater passenger seat * L65 Ceiling light(s) LD/FG area with door contact * T86 Entry handle on the corner pillar at the rear right * 2-way electric window lifter Fgehxsvw Hgmj A Rq Djb * T75 Grab handles for driver and passenger entry * V43 Wooden floor * VA2 Interior paneling for the cargo area up to roof height (wood) * EK1 Terminal block for electrical connection * SB1 Comfort driver's seat * Continuous cargo area partition wall * LC2 LED light strip in the cargo area * VF6 Artico black man-made leather * V94 Cable duct on the side wall * SE5 Lumbar support for the driver's seat * V35 Wheel arch paneling * Seat cover / Upholstery: fabric * Seats in the driver's cab: passenger seat with armrest * Seats in the driver's cab: adjustable passenger seat * Seats in the driver's cab: driver's seat with armrest * J10 speedometer km/h * D50 continuous partition wall Multimedia * E1D digital radio (DAB) * Communication module (LTE) for digital services * E1A MBConnect * E3M MBUX multimedia system with 7 inch touchscreen * Mercedes-Benz emergency call system * Radio preparation * Assyst maintenance interval display * Two-way loudspeaker at the front Comfort and environment * ZG3 all-wheel drive can be switched on with gear reduction * Drive type: all-wheel drive * Outside temperature display * E07 hill start assist * Automatic switch-on for headlights * Electronic brake force distribution * LA2 headlight assistant * Y43 hydraulic jack * Keyless start * Steering wheel (steering column mech. adjustable) * CL1 steering wheel adjustable in inclination and height * MP6 engine version Euro VI * C6L multifunction steering wheel * Pa

Condition: excellent (used), Year of construction: 2007, operating hours: 21,000 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC530, operating hours of spindle: 21,000 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a Hermle C20U 5-axis simultaneous machining center, built in 2007, in excellent condition! The machine has been regularly serviced by Hermle and is in immediate operating condition. Travels: X: 600 mm Y: 450 mm Z: 450 mm C: 360 degrees A: +/-115 degrees Equipment: Control: Heidenhain iTNC 530 Spindle speed: 18,000 rpm Spindle mount: HSK-A63 Tool changer: 30 positions NC swivel rotary table, 280 mm diameter with modification: zero-point clamping system directly in the machine table (larger clamping travel in the Z-axis) 6-position rotary feedthrough Automatic cabin door Manual cabin roof 80 bar internal coolant supply with variable valve and paper belt filter M&H 3D measuring probe Blum A2 tool measurement system Handling interface + interface extension Scraper belt conveyor Laminated glass safety windows Proportional valve Kinematic software option Event Messenger Electrical Heat compensation Bed purge Air seal for glass scales Chip purge gun Status light Accessories: 3D measuring probe M&H Approx. 30 tool holders Control cabinet cooling Machine feet Complete documentation Machine will be available in week 28! Machine can be inspected live after prior appointment! Fgehx A Rqev H N R Te Dsb Machine will be disassembled and loaded by Hermle! Transportation can be arranged upon request! Machine is still in production, so hours are subject to change! We are happy to provide videos upon request!

Condition: ready for operation (used), net weight: 57,000 kg, with digital readout upper and lower roll are synchronized mechanically driven Number of rolls: 4 rolls Roll capacity cold: 3100 x 50 mm Fgjhxewbwx Te A Rq Deb Roll dia upside: 500 mm Dia under roll - side rolls: 400 mm

Condition: new, Year of construction: 2025, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Fgjhjhzbq Tsx A Rq Deb Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: new, Rexroth PGH5-21 / 063RE11VE4 internal gear pump MNR: R900086551FD: 59207, serial number as per photo, unused, 100% functional, scope of delivery as per photos Fgehxei Ec Adj A Rq Dob

Condition: excellent (used), Functionality: fully functional, Set of 2 polishing machines and many accessories 1 x Buehler Metaserv polishing machine + various interchangeable pads + diamond pastes + many new polishing cloths Fgshxjurb S Ns A Rq Dsb 1 x Buehler Metaserv double polishing machine + 14 packs of Bühler sandpaper (approx. 50 pieces per pack) > 700 pieces of high-quality wet/dry sandpaper

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control © -6 x tool temperature control © -12 zone tool heating circuits © -Kistler internal pressure sensors (2x) © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. Fehx A Reuuf Iajq Dogb - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: used, overall weight: 39,000 kg, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, axle configuration: 3 axles, loading space volume: 54 m³, first registration: 06/2020, suspension: air, tire size: -, Year of construction: 2020, * Volume: 54.7 m3 * Walkway * Side cover * 2 hatches * On-board wash * Grain chute * Side release * Manual AWD * Automatic lowering suspension * Aluminum rims * Disc brakes * Spare tire carrier Fohx A Rqewg Hyqo Dogb * 8mm floor / 6mm sides * Internal dimensions 10.60 x 2.45 x 2.10m Tire information: 385/65R22.5 Grain tipper Body: Aluminum

Condition: ready for operation (used), total height: 3,010 mm, total length: 5,150 mm, throat depth: 250 mm, operating speed: 6 mm/s, table width: 180 mm, retraction speed: 60 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: 2D Touch, power: 14 kW (19.03 HP), net weight: 12,500 kg, opening height: 400 mm, passage width: 3,680 mm, total depth: 2,320 mm, 8 axes CNC: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 Duo backgauge Hydraulic clamping LVD tools Hydraulic bombation 2 front plate supports Capacity: 170 ton x 4200 mm Fgohjwbwxyox A Rq Dob Backgauge: CNC Locking speed: 100 mm/sec

Condition: new, Year of construction: 2025, Internal dimensions LxWxH 4300x1700x2200mm, Temperature max. 220°C, oil, gas or electrical heated possible, Tracks for hordes waggons possible, Manual or automatic transport usable, flap or sliding doors producable. Fshx A Rqeizw E Uo Degb

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 7400 mm Measurements depth 5000 mm Measurements height 3300 mm Machine weight 6600 kg Control Unit Brand SIEMENS Model SINUMERIK 840 D Movement X-Axis Movement 520 mm X-Axis Working Feed 1 – 10000 mm/min X-Axis Feed Force 4000 N X-Axis Rapid Traverse 60 m/min Y-Axis Movement 400 mm Y-Axis Working Feed 1 – 10000 mm/min Y-Axis Feed Force 4000 N Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 360 mm Z-Axis Working Feed 1 – 10000 mm/min Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60 m/min Tools Slots in storage 42 Max tool diameter 125 mm Max tool length 250 mm Clamping Unit Clamping force 8000 N Media Chip conveyor Yes Additional Equipment Bar Loader Magazine IRCO RBK 8008 Short Bar Loader Feheu Ha Dzox A Rq Dogb Coolant System with Belt Filter for IKZ Internal Tool Cooling Hornbeam Feed Various Tool Holders Machine Manuals This 7-axis STAMA MC 526/M was manufactured in 2005, featuring a Siemens Sinumerik 840 D control system. It includes a milling spindle with a speed of 10,500 rpm and a turning spindle speed of 5,000 rpm. The machine offers a tool magazine with 132 tools capacity and rapid traverse rates up to 60 m/min. Ideal for complex milling and turning tasks. If you are looking to get high-quality milling and turning capabilities consider the STAMA MC 526/M machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Fehx Aoflz Ins Rq Dogb Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Year of construction: 1996, operating hours: 32,750 h, Condition: good (used), full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Fgohocud Nhjx A Rq Deb Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: used, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2018, Year of construction: 2018, total width: 2,460 mm, total height: 2,650 mm, ID: 3872-816844 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets Fohswd Dqbsx A Rq Degb

Condition: like new (used), Functionality: fully functional, Very nice Shoei folder type Mach Eight for sale. Fjhowglf Eex A Rq Djgb with 2 pockets and electric knife 35000 p/h. This machine has not been running for about 10 years. As a result, the rubber on the rollers has become soft and damaged. We replaced the rollers on 29-4-2025. This machine has been fully checked on mechanical parts and electrical parts and adjusted. This machine has no defects or damage. And functions 100% and complete with all accessories. Can be taken into production for a long time. Of course you are welcome to test this machine with us. We can arrange the transport/packaging for you and load it into a truck or container. Ask for a price including transport (location the Netherlands). Regards Henk Hoos.

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm Fshx A Retqf Sqoq Dogb chip width 650 mm largest grindable workpiece diameter 360 mm max load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm Fjhx A Rjdpcfleq Degb max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 full equipment The cylindrical grinding machine was completely overhauled at PS-Karstens. Fohx Aoh Riwdo Rq Dsgb The machine is inspected and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 1000 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Digital displays for grinding spindle B axis ,workpiece spindle, X, Z axis from HEIDENHAIN Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Fgjhx A Rqjh Rftls Dsb Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock Fshx A Rqsiv Aude Djgb for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm Fehx A Rqjiv Au Ej Dsgb quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. spindle. New infeed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: refurbished (used), Year of construction: 1988, Karstens K11 650 The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is checked and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Fgjhxsh Rixxs A Rq Dob Technical data: Center width: 650 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm Fgjhxoh Rimme A Rq Djb quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat