Used International 824 for sale (9,601)

Condition: excellent (used), Indramat (24474 internal) Mod.1X1X113-008 Dceb Epofg Uu Ho D Txjg Contr.TDM 1.2-50-300-W1

Condition: used, Year of construction: 2013, Serial number: YG9511307D303xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20105   Dcjb Ep Dowdvkmo Txeg 3 axles Lift on axle 1 Swing on axle 3 Good condition with tires, see pictures Air suspension Standard height inside 410-450 cm in height Interior length 1347 cm Internal width 247 cm Total length 1385 cm Wheelbase 136/255 cm Width 255 cm Ready for delivery Technical approved: Yes EU-approved until: 19.09.2025 Own weight: 9900 Total Weight: 45000 Payload: 35100 Width: 255 Length: 1385

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Dsb Ep D Touyialoxocg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE Dsb Ejwgan Uop D Txecg 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: new, Year of construction: 2025, NEW Mobile loading and unloading ramp with a load capacity of 10T. Technical parameters: 1.) Load capacity 10T 2.) Internal width 2.0m - external width 2,1m 3.) Length 11.3m Dsb Ep D Tsrqfq Esxscg 4.) Total weight 2.9T 5.) Height adjustment 1.1-1.8 m 5.) Fork holder for the ramp transport truck 6.) Transport wheels 7.) Plumbing The ramp floor is made of BRIDGING GRILLE, which is GALVANIZED!!!. the grating is a great advantage of this ramp, unlike ramps that have a floor made of sheet metal and steel mesh or bars placed on it. the wheels of the forklift do not slip on the ramp, and they clean themselves during the drive, which means that the floor of the loaded container or truck is not contaminated with mud or snow. ​

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Dceb Ep Dewgch Do Txjg Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Dobowf Dzvs Ep D Txecg Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, Serial number: WKESD0000068xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 16407 Specifications: - 2016 model - Air suspension - Tires (see pictures) - Inside length: approx. 1,340 cm - Internal width: approx. 251 cm - Internal height: approx. 275 cm - Net weight: 9,500 kg - 2 temp Carrier unit - Ready for delivery Description: 2016 Krone cool liner cabinet semi with 2 temp unit. Ready for delivery. Dob Ep Devgxvxo Txecg Technical approved: no EU-approved until: 24.01.2024 Own weight: 9500 Total Weight: 43500 Payload: 34000 Width: 260 Length: 1404

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Dcob Esqhkkzep D Txjg

Condition: used, mileage: 1,558,580 km, power: 385 kW (523.45 HP), first registration: 04/2000, fuel type: diesel, number of seats: 72, gearing type: automatic, emission class: euro2, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, +++Engine and transmission v. 200,000-300,000km new+++ +++very clean condition+++ Engine: Mercedes-Benz Emission class: Euro 2 Gearbox: AutomaticSeats: 70+1+1 sleeping seats with lap belts _____ Safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Sausage cooker * Central toilet * Leather head inserts * Driver microphone * Tour guide microphone Exterior * Trailer hitch prepared * Raising/lowering system * Power steering * Tachograph with window * Sun visor * Electric exterior mirrors * Driver door Dcobewg Np Is Ep D Txog * Ski case eyelets * Central locking * Roof hatches Audio & communication * Radio / cassette * Video Other * Hubcaps * Twin tires * Tires: front: 50%, rear: 50%, rear: 40% * Vehicle dimensions: 2.55 m wide, 4.00 m high * Our internal vehicle number: 11383 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: new, Brand-New Machining Center HEIDENHAIN TNC 7 HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 450 mm Y-axis: 460 mm Z-axis: 500 mm Table diameter: 320 mm Maximum workpiece diameter: 400 mm Max. spindle speed: 12,000 rpm (oil-cooled) Spindle mount: SK 40-BIG PLUS (BVD 40) Max. spindle motor power: 17 kW Internal coolant supply - 20 bar Rapid traverse rates X, Y, and Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Dual gripper tool changer: 30-station (expandable up to 80 tools) Dcsb Ep Doh Ekqye Txsg Hinged belt chip conveyor Full enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: ready for operation (used), total height: 2,865 mm, total length: 4,200 mm, throat depth: 400 mm, operating speed: 22 mm/s, table width: 120 mm, retraction speed: 200 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman Touch, power: 27 kW (36.71 HP), net weight: 11,000 kg, opening height: 400 mm, passage width: 2,600 mm, total depth: 2,725 mm, 2 buighulpmiddelen Turbo-versie Eenvoudig vorm lasermeetsysteem Lasersafe-beveiliging Dob Epev S Anij D Txjcg Capacity: 135 ton x 3100 mm Backgauge: CNC Locking speed: 180 mm/sec

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Dcob Eowf Dh Nsp D Txjg Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, mileage: 483,000 km, Year of construction: 2005, Serial number: WMAN13ZZX6Y15xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20114 Specifications: Model year: 2005 Mileage: approx. 483,000 km Transmission: Manual Tires: Good tires (see pictures) Internal length: approx. 447 cm Internal height: approx. 220 cm Curb weight: 5890 kg Max payload: 1525 kg Cargo lift Engine: 205 hp Tool cabinet Side opening 2x rotor lamps Bed Radio/CD Air conditioning (AC) Description: MAN TGL 8.210 box truck from 2005 with Cargolift and 205 hp engine. The truck has good tires , side opening , 2 rotor lamps and tool cabinet . It had EU approval , but this recently expired with comments on exhaust , brakes and chassis bolt . Sold as is, so some costs will be calculated. Ready for delivery . See video for more information. Km: 483000 HK: 205 Djbewdvlkj Ep D Txocg Technical approved: no EU-approved until: 19.03.2025 Own weight: 5890 Total Weight: 7490 Payload: 1525 Width: 230 Length: 700 Euro: 4 Gearbox: Manual

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Dcsb Epsqhkkte D Txog

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2910 mm Measurements depth 4888 mm Measurements height 2981 mm Machine weight 12000 kg Control Unit Brand FANUC Model 310iS-A Main Drive Number of spindles 1 Spindle speed range 14000 Spindle motor power 22 kW Tool taper HSK-A 63 Number of axis 4 Movement X-Axis Movement 730 mm Y-Axis Movement 730 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 500 kg Tools Max weight 12 kg Max tool diameter 70 mm Max tool length 510 mm Media Chip conveyor Yes Internal cooling Yes Cooling pressure 30 bar Additional Equipment Direct path measuring systems in XYZ-axis Core cooling of the ball screw spindles and bearings with circulating oil // Jacket cooling on spindle nose and motor High-speed blanking function Linear guides in heavy-duty design: 55 mm Renishaw OMP60 touch probe // Renishaw Inspection Plus Automatic override of the corners: G62 Restart after programme interruption User macro with 600 variables Flow monitor for coolant through the spindle General Data Measurements width 2910 mm Measurements depth 4888 mm Measurements height 2981 mm Machine weight 12000 kg Control Unit Brand FANUC Model 310iS-A Main Drive Number of spindles 1 Spindle speed range 14000 Spindle motor power 22 kW Tool taper HSK-A 63 Number of axis 4 Movement X-Axis Movement 730 mm Y-Axis Movement 730 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 500 kg Tools Max weight 12 kg Max tool diameter 70 mm Max tool length 510 mm Media Chip conveyor Yes Internal cooling Yes Cooling pressure 30 bar Additional Equipment Direct path measuring systems in XYZ-axis Core cooling of the ball screw spindles and bearings with circulating oil // Jacket cooling on spindle nose and motor High-speed blanking function Linear guides in heavy-duty design: 55 mm Renishaw OMP60 touch probe // Renishaw Inspection Plus Automatic override of the corners: G62 Restart after programme interruption User macro with 600 variables Flow monitor for coolant through the spindle Dcobowg Icys Ep D Txsg This 4-axis Makino A61nx horizontal machining center was manufactured in 2015. It features a robust spindle with speeds up to 14,000 min-¹, a torque of 240 Nm, and a power of 30 kW. The machine includes a high-capacity tool magazine with storage for 60 tools and rapid tool change times. Ideal for heavy-duty machining with a pallet size of 500 × 500 mm and maximum workpiece weight of 700 kg. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: new, Brand New Machining Center HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN Package (Motors, Encoders, and Handwheel) X-Axis: 1,430 mm Y-Axis: 670 mm Z-Axis: 640 mm Table Size: 1,500 x 620 mm Table Load Capacity: 1,200 kg Spindle Speed: 10,000 rpm (Oil-Cooled) Spindle Mount: SK 40-BIG PLUS (BVD 40) Maximum Spindle Motor Power: 32 kW Internal Coolant Supply - 20 bar Rapid Traverse: 30,000 mm/min Deb Epjhy Atfe D Txecg Positioning Accuracy: ± 0.005 mm Repeat Accuracy: ± 0.003 mm Tool Changer: 30-station Hinged belt chip conveyor 4th axis preparation (rotary table) Fully enclosed Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, net weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slak: 950 mm Maximale verticale slak: 700 mm Horizontale schuifmaat Maximale horizontale slak: 630 mm Maximale verticale slak: 1000 mm Dwarsbalk maximale slak: 660 mm Deb Ep D Tsv Sftzjxecg Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long: 3170 mm Wide: 3030 mm

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg Dcob Eovw Dwvsp D Txjg -Tool charger -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Condition: used, Year of construction: 2018, operating hours: 2,824 h, Field of application: Construction Serial number: 4xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20146 Djbjwdvice Ep D Txscg Specifications: - 2018 model - 2824 hours - 46.5kW - 8315 kg - Central lubrication - Extra hydraulics - S50 attachment - Machine width: 220 cm - Track width: 43 cm - Rubber scrapers - Oil leak - Cleaning bucket - ​​Cleaning bucket - ​​Rototilt - Air conditioning/ac - Lights - Radio - Ready for delivery Description: We have a 2018 Kubota KX080-4 excavator w/ cutter, rototilt, cleaning bucket, cleaning bucket for sale. The machine has a crack on the tilt of the rototilt. This will be fixed before sale according to the owner. Services have been performed by the owner himself. Ready for delivery Hours: 2824 Total Weight: 8315 Width: 220 Kw: 46.5

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Deb Eoncdx Nop D Txecg

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Maximum workpiece weight: 6,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Dcsb Eeq I Ncqsp D Txjg Internal coolant supply - 36 bar Rapid traverse X, Y & Z: 30 m/min Positioning accuracy: 0.015 mm Repeatability: 0.010 mm 40-station tool changer 2 x longitudinal hinged chip conveyors Perimetric cover Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Dcob Eencdx Ejp D Txog

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis / Cross-arm: 1,500 mm V-axis / Cross-column: 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse speeds X, Y, V & Z: 30 m/min Positioning accuracy: 0.020 mm Dsb Ejq I Nlysp D Txecg Repeatability: 0.010 mm Tool changer: 60-station Double-hinge chip conveyor (longitudinal) Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: new, Brand new bed-type milling machine with integrated rotary table HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Table size: 3,100 x 1,100 mm (including integrated rotary table Ø 1,100 mm) Automatic universal swivel head 1° x 1° Spindle mount: SK 50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 38 kW Internal coolant supply - 36 bar Rapid traverse X, Y & Z: 30 m/min Debom Tv Iio Ep D Txscg Positioning accuracy: 0.030 mm Repeatability: 0.010 mm Tool changer: 40-station (optional up to 150 tools) 2 x longitudinal hinged chip conveyors Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed