Used International 554 for sale (9,590)

Condition: used, mileage: 86,000 km, Year of construction: 2018, Serial number: ZCFA775F80267xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19351 Specifications: - Km: Approx. 86,000 - Gear: Automatic - Euro 6 - Engine brake (replaced) - 4x2 - Side door - Good tires - 15 pallet cabinets - Norka box - Inside length: Approx. 6.05 m - Internal width: 2.47 m Croln Uguevg Aazj Njb - Internal height: 2.34 m - Zepro liftlimb - 1500 kg - 207 Hp - 3 seats - Radio/CD - Climate/AC - Reversing camera - Ready for delivery Description: Iveco 75E Cabinet van from 2018. The truck has only traveled 86,000 km! Ready for delivery. Km: 86000 HK: 207 Technical approved: Yes EU-approved until: 31.10.2025 Own weight: 4850 Total Weight: 7500 Payload: 2575 Width: 255 Length: 790 Euro: 6 Gearbox: Automatic

Condition: reconditioned (used), machine/vehicle number: 28139, Year of construction: 2021, operating hours: 9 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION Coln Uewhlv Hjgu Nerb WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Li 119-250 DT - Pedestrian pallet stacker Drive type: Electric Capacity: 2,000 kg Lift height: 2,500 mm Load center: 600 mm Year of manufacture: 2017 Operating hours: only 9 hours Mast type: Duplex Fork length: 1,150 mm Height: 1,300 mm Weight: 950 kg Front tires: Polyurethane Rear tires: Polyurethane Charger: Integrated

Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: Cjlnjwhfi Ts Ugu Nsrb - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Crjln Uowgw Tbjgu Neb

Condition: excellent (used), Functionality: fully functional, mileage: 92,926 km, power: 265 kW (360.30 HP), first registration: 08/2017, overall weight: 26,000 kg, axle configuration: 6x2, maximum load weight: 9,950 kg, empty load weight: 16,050 kg, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, hydraulics, Mercedes Benz Antos 2536 Side loader Inch SLF XL 28 - Manufacturer: Mercedes-Benz - Type: Antos 2536 - First registration: 08/2017 - Kilometers: 92.926km - Unladen weight: 16.050kg - Payload: 9.950kg - Gross vehicle weight: 26,000kg - Power: 265kw/360PS - Lane keeping assistant - Right-hand drive - Automatic air conditioning - Adblue - 6x2 - Inch side loader (right) - Type: SLF XL 28 - Operating hours: 9764h - With integrated dumping - Type: Zöller FLEX 1100 - Tiltable emptying container - Telescopic emptying mechanism - Vertically and horizontally adjustable - Internal and external operation - Euro 6 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - Cjlsvdc Uyjn Ugu Njrb - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: excellent (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MT1212_2025_1, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Cjlnowhmtgs Ugu Njrb Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: used, Year of construction: 2010, Serial number: YF904UPPRA300xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18631 Specifications: - 2010 model - 3 axle - Disc brakes - Lift on 1 axle - Turn on 3 axles - Internal width in cabinet: 2,502 m - Internal Length in cabinet: 13,462 m - Internal height in cabinet: 2,799 m - Heating in box - Ready for delivery Croln Ugovg Atzeu Neb Description: There is lift on 1 axle and turn on 3 axles. There is heat in the box and full side opening. Some repair cost must be taken into account. Ready for delivery Technical approved: no EU-approved until: 20.08.2024 Own weight: 9380 Total Weight: 39000 Payload: 29620 Width: 260 Length: 1386

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2995 mm Measurements depth 5425 mm Measurements height 2955 mm Machine weight 16500 kg Control Unit Model OSP-P300SA Brand OKUMA Main Drive Number of spindles 1 Spindle speed range 4200 rpm Spindle motor power 22 kw Spindle bore ø91 mm Number of axis 6 Movement X-Axis Movement 645 mm Y-Axis Movement 250 mm Z-Axis Movement 1600 mm W-Axis Movement 1594 mm B-Axis Movement 240° C-Axis Movement 360° 1-AXIS Movement -30 - 210 2-AXIS Movement 360 Workpiece Workpiece drm 650 mm Workpiece X 1500 mm Turret Number of turrets 1 Rotating tools Yes Media Internal cooling Yes Additional Equipment Capto C6 tool system for H1 turret Internal coolant supply for rotating tools, pump with pressure max 20 bar including bag filter, external cooling of tool spindle, pump with pressure max 3 bar Tool magazine with 80 pockets External air supply and through the tool spindle for turning holders and rotating tools Hinge belt tensioner Interlit ISF Drum trough filter TMF 300 with clean tank 980 Workpiece gripper programmable, for workpiece size ø 70 x 150 mm 80 tool positions Spindle front bearing diameter 140mm / Spindle bore diameter 91mm Counter spindle 420 Nm; 5000 1/minSpindle front bearing diameter 120mm Crsljwhgt Tjn Ugu Nob This 6-axis Okuma Multus U3000 1SW 1500 was manufactured in 2023. A vertical machining center featuring a swing over saddle of ø650 mm, it can handle a maximum machining diameter and length of 650mm and 1500mm, respectively. It boasts extensive travels with X: 645m, Z: 1600mm, Y: 250mm, W: 1594mm, and a C-axis of 360 degrees. Ideal for complex machining tasks, the Okuma Multus U3000 1SW 1500 machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2014, Functionality: fully functional, power: 7.5 kW (10.20 HP), ABB Motor 7,5 kw Stainlesssteel housing Type : ETACHROM BC 32-200/752 C11 Diameter 196 MM Cjln Ugjwg Alveu Nsrb Q 31.5 M3/hour H 51.2 M 2930 RPM Weight appr 50 kg We have 6 pumps of this type available but different YOM’s : 2014 - 2002 -2008 Pumps are new from a surplus stock and have never been used.

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Creln Uswg E Hpegu Nob Operating hours: 33,703

Condition: good (used), Year of construction: 2006, 2006 Doosan Mynx-750 Vertical CNC Machining Center with Fanuc Series 21i-MB Control Table Dimension 1,600 x 750mm (6 x 17mm T Slots at 125mm Centre). Maximum Table Load 1,500kg. Axis Travel 'X'=1,500mm, 'Y'=760mm, 'Z'=650mm. Rapid Feed 'X/Y' Axis 30 m/min, 'Z' Axis 24 m/min. Maximum Spindle Speed 12,000 RPM (Motor 10.0kW). Spindle Nose BT40. 30 Station ATC. S/No. MYNX750065. Moxa Wireless File Transfer System. Renishaw Machine Probe With Renishaw OMP60 Spindle Probe Included. Remote Axis Control. 300 Ltr Coolant Tank To Supply Through Spindle Coolant And Flood. Twin Screw Auger To LNS Turbo Plate Type Swarf Conveyor. Internal LED Lighting. Machine Status Tower. No Tooling Included. Machine Dimensions (W)4,800 x (D)3,300 x (H)3,500mm. Cjlswhv Dzsn Ugu Nsrb

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm Csln Uswfdzcsgu Nsrb - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: used, Year of construction: 2014, Serial number: WKESZ0000061xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19001 Specifications: - 2014 model - Air suspension Cslovgy D Dsn Ugu Nerb - Tires (see pictures) - Internal length: approx. 1,361 cm - Internal height: approx. 261 cm - Internal width: approx. 247 cm - Net weight: 8,500 kg - 2000 kg Zepro lift Description: 2-axle krone cabinet semi from 2014. It is equipped with a Zepro lift with a capacity of 2000 kg. Eu-approved and ready to be put into operation. can be delivered within a short time. Technical approved: Yes EU-approved until: 28.06.2025 Own weight: 8500 Total Weight: 32000 Payload: 23500 Width: 255 Length: 1386

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3102 mm Measurements depth 1496 mm Measurements height 2538 mm Machine weight 2780 kg Control Unit Model CNC-B00 Brand BROTHER Main Drive Spindle speed range 16 - 16000 rpm Spindle motor power 6.0/11 KW (continuous/10 min) Tool taper ISO 30 Number of axis 5 Movement X-Axis Movement 700 Y-Axis Movement 450 Z-Axis Movement 410 Table Outer length 650 mm Outer width 850 mm Table load 200 kg Additional Equipment Internal Cooling: Yes (70 bar Through-Spindle Coolant) Cooling Pressure: 70 bar Air Supply: 0.4-0.6 MPa, 180 l/min Crjln Ugowgqbfju Neb Coolant Tank Capacity: 250 L This 5-axis Brother TC-22B-O vertical machining center was manufactured in 2007. It features a high-speed spindle capable of 16,000 rpm and a robust 70 bar through-spindle coolant system. The machine includes an automatic tool changer with 27+1 tool capacity, enhancing productivity and efficiency. The Brother CNC-B00 control unit ensures precise 5-axis control, table is 1 axis. For more information about this vertical machining center, please reach out to us. Application Types Milling

Condition: good (used), Year of construction: 2018, operating hours: 15,257 h, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Operating hours: 15,257, Spindle hours read: 6,887, Travel paths (XYZ): 650 x 520 x 475 mm, Max. spindle speed: 22,000 rpm, 60-station SK40 tool changer, Control: SIEMENS 840D, 1 chip conveyor, 1 belt filter system / internal cooling Creln Uguewhwm Re Njb 3D measuring probe

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 21 mm/s, table width: 120 mm, retraction speed: 200 mm/s, controller manufacturer: Cadman-B Touch, power: 42 kW (57.10 HP), net weight: 15,000 kg, passage width: 2,600 mm, additional equipment features: yes, 9 assen: Y1 / Y2 / X / R / X#39; / Z1 / Z2 / T1 / V Easy Form lasermeetsysteem Vergrote opening en vergrote slag CNC gestuurde buighulp Wila boven- en onder hydraulische klemming Wila gereedschapsstation Lasersafe-beveiliging Capacity: 220 ton x 3100 mm Backgauge: CNC Max stroke: 400 mm - option Max distance between table -- ram: 600 mm - option Colov Rwbzjn Ugu Nerb Locking speed: 120 mm/sec

Year of construction: 2022, Condition: excellent (used), 2022 Prosaw Mega Machine Co. Ltd BS-330GA Horizontal Automatic Feed Vice Power Saw Maximum Capacity Ø330mm. □ 350 x 250mm. Bundle 250 x 165mm. Blade Speed 20 - 72m/min. Feed Stroke Maximum 400mm. Blade Size 3,820 x 34 x 1.1mm. Bed Height 593mm. Dimensions (W)2,250 x (D)2,000 x (H)1,800mm. Weight 1,410kg. S/No. 220315. Coljwhvvwen Ugu Norb Blade Guide with Internal Coolant Feed. Hydraulic Screwed Auger Swarf Feed. Hydraulic Bundling Clamps Included. Includes Roller Conveyor. (W)550 x (D)1,950 x (H)630mm

Condition: used, Year of construction: 2017, Serial number: VFKFKSRS4GBXXxxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18959 Crolnevgy Szs Ugu Njb Specifications: - 1 axle - Forced control - Lift - Good tires - Air suspension - Internal length: 11.2 m - Internal width: 2.5 m - Internal height: 2.7 m - 27 podium places - Ready for delivery Description: 1 axle Citysemi from 2017. Coercive control from the kingpin. Ready for delivery. Technical approved: Yes EU-approved until: 01.09.2025 Own weight: 6700 Total Weight: 27000 Payload: 20300 Width: 255 Length: 1137,9

Condition: ready for operation (used), Panelen voor thermische isolatie van industriële gebouwen Panelen voor sectionaaldeuren (huidige configuratie) Panelen voor residentiële dakisolatie Manni trolleypers 2+2 De hydraulische gesloten matrijzenpers (2+2) is de optimale oplossing qua productiviteit en fabrieksindeling. Onafhankelijk gemotoriseerde tafels maken het mogelijk om één sandwichpaneel te prepareren terwijl een ander paneel in de pers uithardt, waardoor de productiestoptijden aanzienlijk worden verkort. - 4 tafels - tafelafmetingen: 9500 x 1600 mm - maximale opening: 150 mm - elke cyclus produceert 4 sandwichpanelen Manni-manipulator voor automatisch laden en lossen + stapelen van afgewerkte panelen Maximaal werkstukgewicht: 700 kg Polyurethaan doseerunit Cannon A-Compact HF De injectie wordt aan beide zijden van de Manni-pers gedaan Ontworpen voor de verwerking van polyolmengsels met vaste vulstoffen (RRIM) Ommantelde en geïsoleerde tanks met niveauregeling en automatisch bijvullen met speciale roerder voor vaste vulstoffen Recycle stroomverdelers Digitale lage/hoge drukmeters Hybride doseersysteem: zuigerpomp voor isocyanaat, hydraulische cilinder speciaal ontworpen door Cannon voor gevulde polyol Automatische output- en ratio-aanpassing en -regeling in gesloten lus Touchscreen bedieningspaneel Kalibratie van elk onderdeel direct via de mengkop Celn Ugov Sfmnsu Norb 400V – 50Hz – 118 ampère – 66 kW Benodigde ruimte : 25 meter x 16 meter x 4,16 meter CBM-rolvormlijn voor het maken van sandwichpanelen voor sectionaaldeuren klik hier Manni / Cannon PU pers klik hier Rolvormlijn voor het maken van verschillende profielen voor de installatie van sectionaaldeuren klik hier Bonnamy tubebender klik hier

Condition: used, mileage: 196,000 km, Year of construction: 2018, Serial number: YS2G4X2000215xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19596 Specifications: - Mileage: 196,000 - Transmission: Automatic - Suspension: Full air - Engine brake - Euro 6 - Okay tires - Full Side Opening - Bus Building Cabinet - Zepro lift, 2000 kg - Remote control - Internal length: 7.6 m - Internal width: 2.5 m - Internal height: Approx. 2.69 m - 320 HP - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Services taken at Team Verksted Description: Scania G320 Box truck from 2018. Bus building cabinet with full side opening. EU approved and ready for delivery. Inverter in the cabinet is not working. Km: 196000 HK: 319 Technical approved: Yes EU-approved until: 27.09.2025 Coln Ugovyd U Teu Nsrb Own weight: 10790 Total Weight: 21000 Payload: 10135 Width: 260 Length: 1010 Euro: 6 Gearbox: Automatic

Condition: ready for operation (used), laser power: 4,000 W, controller manufacturer: Siemens, FL 600 3D tube laser cutting machine 4000 Watt Trumpf CO2 4 self-centring mobile mandrels tube length control 5 axis 3D laser cutting system Siemens 840D Crjlnjwgfyvo Ugu Nob tube diameter: from 100 to 610 mm tube length: from 4000 to 14 000 mm square section: from 100 x 100 to 400 x 400 mm max rectangular section: 500 x 300 mm max oval section: 500 x 300 mm max C-profile: 500 x 300 mm max L-profile: 400 x 400 mm max IPE profile: 550 mm max HEA profile: 400 mm With loading unloading stations X: 3500 mm Y: 1500 mm Z: 1000 mm Type of Laser: Trumpf TLF 4000

Condition: used, mileage: 345,000 km, Year of construction: 2015, Serial number: WDB9630201L92xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17172 Specifications: - Km: Approx. 345,000 - Gear: Automatic - Full air suspension - Retarder - Euro 6 - 6x2 - Good tires - Zepro lift, 2500 kg - Remote control - Cabinet: Chereau - Carrier cooling/freezer unit - Partition wall all the way - Inside length: Approx. 8.62 m - Internal height: Approx. 2.69 m - Internal width: Approx. 2.5 m - Booms Cslevg Rcksn Ugu Nerb - Partition can be attached so that there is room for 6 pallets - Tool cabinet - Bed - Refrigerator - Radio/CD - Climate/AC - Service agreement until 2022 - Services have been taken at the workshop after this - Ready for delivery Description: 2015 Mercedes truck with full side opening. Partition wall all the way and barriers. Space for 6 pallets in front. The unit has recently been serviced added a lot of costs. The truck is Eu-approved and ready for delivery. Chiller/freezer unit. Km: 345000 HK: 509 Technical approved: Yes EU-approved until: 14.08.2025 Own weight: 15020 Total Weight: 27000 Payload: 11905 Width: 260 Length: 1102 Kw: 375 Euro: 6 Gearbox: Automatic

Condition: used, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 19266 Specifications: - Weight: approx. 1390 kg - Model: P-12SS - Max lift height: 450 cm - Lifting capacity: approx. 1200 kg - Ready for delivery. Description: Colevg Ah Sjn Ugu Njrb Owner says it works. Some repair cost must be taken into account. It has a height of 4.5 meters. Can be delivered within a short time. Total Weight: 1390

Condition: used, mileage: 393,000 km, Year of construction: 2019, Serial number: YS2R6X2000216xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18911 Specifications truck: - 2019 model - Km: approx. 393,000 - Gear: Automatic - Tires (see pictures) - Retarder - Back tip - Hydraulic side and roof - Vang superconstruction - Euro 6 - Length: 904 cm - Width: 255 cm - Wheelbase: 435/135 cm - Net weight: 12,680 kg - Inside length: approx. 649 cm - Internal height: approx. 278 cm - Internal width: approx. 249 cm - 6x2 - 500 hp - Trailer hitch - Extra lights - Tool box - Radio/cd - Climate/ac Specifications trailer: - 2007 model - Tires (see pictures - Length: 1,121 cm - Width: 254 cm - Wheelbase: 131/419 cm - Net weight: 8500 kg Cjljvg Aauen Ugu Nerb - Tool box Description: 2019 Scania R500 chip truck for sale with Vang trailer from 2007. The Vang trailer needs some maintenance. Services are followed at Scania. Ready for delivery. Km: 393000 HK: 500 Technical approved: Yes EU-approved until: 23.10.2025 Own weight: 12680 Total Weight: 28000 Payload: 15245 Width: 255 Length: 904 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2017, Serial number: W09STTM3NHEN1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18975 Specifications: - 2017 model - 3 axle - Turn on 3 axles - Hydraulic kj rebruer - Extraction at 5.5 metres - Internal length on 1 stage: 4,413 m - Internal length p 2 stage: 8,887 m - Total internal length: 13,281 m - Internal width: 2,511 m - Tires (see pictures) - Light Coln Uguovgyfze Norb - Cupboard space - Ready for delivery Description: 2017 HRD 3 axle machine trailer for sale. Everything works as it should according to the previous owner. There is a turn on 3 axles and an extension of 5.5 metres. Ready for delivery Technical approved: Yes EU-approved until: 08.01.2026 Own weight: 11940 Total Weight: 52900 Payload: 40960 Width: 255 Length: 1375