Used Maho Mh500W Cnc for sale (8,690)

Condition: good (used), Year of construction: 2005, Gildemeister CTX 210 V3 Year of manufacture 2005 Machine number 0145000132A Fanuc control Maximum turning length: 300 mm Max. turning diameter: 200 mm Spindle bore: 45 mm Turning diameter over bed: 380 mm Main spindle speed range 6000 rpm Main electronic connection: 400 V / 50 Hz Total power requirement: 21 kVA Dimensions LxWxH 2885 x 1720 x 1670 mm Weight approx. 4200 kg Travel paths: Dceb Eovt S H Dsq Uqhsg X-axis 165 mm Z-axis 340 mm Equipment: - Driven tools - Tool holder VDI30 - Part catcher - Tailstock - Chip conveyor - 12 Turret positions The machine was in operation until recently and is fully functional. Price net, free loading from warehouse

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t In our opinion, the machine is in very good condition and can be viewed under power by appointment. The chuck on the 4th axis and on the table are not included in delivery. Technical features: - incl. 4th axis Deb Eq Uswf D Atsqhscg - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1999, turning diameter 400 mm turning length 600 mm Dsb Eswgkcpeq Uqhjcg control Turn Plus CNC Pilot 3190 total power requirement 44 kVA weight of the machine ca. 5 t dimensions of the machine ca. 6 * 2,5 * 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Dcobowgkt Uo Eq Uqhsg Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12

Condition: excellent (used), Year of construction: 1999, Sheet metal press brake MECOS Mod SYNCHRO 30/125. Useful bending length 1350 mm. Bending pressure 30 Ton. N 4 axes Y1-Y2-X-R. Piston stroke 110 mm. Lateral recess 220 mm. Updated ESA CNC control. Passage between uprights 1250 mm. Dcob Eov S Arzoq Uqheg Distance between ram table 250 mm. Motorized back gauge. Upper locking type Promecam. Motor power 7.5 kw. Machine weight 2900 Kg.

Condition: used, Year of construction: 1996, x-travel 800 mm y-travel 550 mm Dcob Eq Uewgi Hmeqhjg z-travel 500 mm

Condition: ready for operation (used), controller model: Siemens Sinumerik 810D, total length: 3,650 mm, total width: 1,738 mm, total height: 1,900 mm, net weight: 5,250 kg, swing diameter over cross slide: 750 mm, C-as lineaire meting in X-as 12 grondstoffen - VDI - max 4000 tpm Inclusief spaantransportband RS232 Swing over bed: 630 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-8 Djb Eov Sfq Heq Uqhscg Dia of spindle bore: 92 mm Power on the spindle: 18,5/22 kW Number of speeds: 2 > 3000 rpm Total power needed: 52 kVa Chuck: Rohm dia 254 mm Toolchanger: yes, Sauter Number of tools: 12 driven positions

Condition: used, Year of construction: 2013, x-axis 330 mm z-axis 1.050 mm control Heidenhain Djb Eqovy Ipho Uqhocg spindle tunring speed 3.200 U/min drive capacity - main spindle 33 kW turning diameter 465 mm turning length 1.050 mm swing diameter 680 mm chucking diameter 305 mm spindle bearing diameter 100 mm spindle bore 76 mm max. rod diameter 72 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1987, operating hours: 53,861 h, Functionality: fully functional, CNC lathe Djb Eq Uqsua I A Ajhocg Make: TRAUB Type: TNA 480 L with TX8D control Rotation diameter longitudinal slide: 660mm Rotation diameter cross slide: 445mm Turning length: 2000mm Chuck diameter: 250/315mm Spindle clearance: 80/100mm Total weight: 9500 kg With 2 steady rests.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AL1/004666, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,018 mm, travel distance Z-axis: 200 mm, controller model: Windows XP, overall weight: 2,800 kg, Machine will be loaded free of charge! TECHNICAL DETAILS Operating system: Windows XP with 15" CRT color screen & Intel Celeron 2 GHz Travel paths and working areas X-axis Travel path: 2,650 mm Electric mandrel working area: 2,903 mm Horizontal drilling heads: 2 (64 mm spacing) Disc milling unit (X-direction): integrated, 4,000 rpm, 2.2 kW, Ø 120 mm Y-axis Travel path (vertical drilling area): 1,018 mm Electric mandrel working area: 1,240 mm Horizontal drilling heads: 1 Z-axis Travel path: 200 mm Panels Max. panel size (double-station machining): 1,180 mm Max. panel thickness: 180 mm Speeds X/Y travel speed: 54 m/min Dcsb Eq Uqewh Syxjhsg Travel speed Z: 11.5 m/min Milling unit (electric mandrel) Spindle type: HSK 63 Power: 7.5 kW Speed range: 1,500 – 24,000 rpm Tool holder: HSK 63, straight tool holder Tool magazine (type R8L): 8 positions Max. tool diameter: Ø 120 mm Max. tool weight per holder: 4.5 kg Max. total weight (tools + holder): 22 kg Horizontal milling unit (2 outputs) Speed range: 9,000 – 18,000 rpm Motor power: 3 kW (4 HP) Front tool: Ø 20 mm, length 110 mm Rear tool: Ø 12 mm, length 80 mm Circular saw blade: Ø 100 mm Drives and power Main spindle power: 2.2 kW (3 HP) Main spindle speed: 4,000 rpm Spindle mount: M10 EQUIPMENT - 12 vertical drilling spindles (7 in X, 5 in Y) - 4 panel support tables, each 1,000 mm long - 2 additional universal supports, 25 mm high - 8 automatic round vacuum cups with aluminum bodies (2 per table) - 4 vacuum cup holders for contour machining - Vacuum pump with 100 m³/h capacity - Vacuum conveyor - Automatic central lubrication for X and Y axes - Pneumatic loading aids for 1,000 mm tables

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Dcobewhn Swj Eq Uqhjg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 10,682 h, General Data Measurements width 2.21 m Measurements depth 2.7 m Measurements height 2.93m Machine weight 7500kg Control Unit Brand SIEMENS Dceb Eqjwgf A Ds Uqhsg Main Drive Spindle speed range 20-8000 min-1 Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 800 Y-Axis Movement 600 Z-Axis Movement 500 Tools Type of tool holder SK 40 Additional Equipment Extended tool magazine 30 tool positions not included in delivery: fixture shown in pictures is not for sale This 5-axis HERMLE C800 U was manufactured in 1998 and features a Siemens control system and an extended tool magazine. With a SK 40 tool holder, it has driven 91886 hours and the spindle has operated for 10682 hours. If you are looking to get high quality milling capabilities consider the HERMLE C800 U machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. Djb Eswf Aftsq Uqhocg 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: EH0720 CNC, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness (max.): 20 mm, roller (top) diameter: 220 mm, roller diameter: 220 mm, overall weight: 2,200 kg, total length: 1,650 mm, total height: 1,280 mm, total width: 1,230 mm, roller (bottom) diameter: 200 mm, bending length: 750 mm, type of input current: three-phase, working length: 750 mm, roller length: 760 mm, sheet width: 750 mm, working width: 750 mm, side roll diameter: 180 mm, working height: 750 mm, type of motor: three-phase motor, power: 7.35 kW (9.99 HP), Equipment: USB port, documentation/manual, emergency stop, 4 roll plate bending machine capacity 700 x 20 mm Brand MG model EH0720 CNC year of make 2001 Dceb Eqjwhrkwj Uqhsg width on the rolls 750 mm upper roll 220 mm pinch roll 200 mm side rolls 180 mm + 1 extra upper roll smaller size 175 mm interchangeable CAPACITY : Plate width 700 mm plate thickness 20 mm prebend 16 mm Configuration installed: Dual initial pre-pinch fully programmable CNC 4 axis Hardened surface of the 4 rolls,very high resistance against wear. Rolls rotation powered driven  with  gearboxes and hydraulic motors. Drop-end opening to unload the cylinders closed. hydraulic overload safety protect Centralized commands console electric joysticks on screen position readout of the 4 rolls for manual use. Digital programmable 4 axis automatic rolling 10" screen with input foil keyboard CNC-WIN Programming system teach-in steps input Virtual infinite programs memory on HDD and USB stick Safety and emergency systems installed

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101197, Used CNC vertical lathe Make: EMAG Type: VTC 250 Dcsb Eqjv Hp Dmj Uqhjg Year of manufacture: 2008

Condition: excellent (used), Year of construction: 2014, operating hours: 10,000 h, Fanuc α-D21MiA5 CNC Machining Center Spindle speed: 24,000 rpm (High Power Version) X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm 4th and 5th axes: Yes Rapid traverse: X-axis: 54 m/min Y-axis: 54 m/min Z-axis: 54 m/min Worktable load capacity: 300 kg Tool changer load capacity: 23 kg Max. tool weight: 2 kg Tool diameter: 150 – 12,000 rpm: 80 mm 12,000 – 15,000 rpm: 60 mm 15,000 – 20,000 rpm: 45 mm Dsb Eq Uewgn Hlsqhscg 20,000 – 24,000 rpm 40 mm SCOPE OF OFFER INCLUDES (list is not exhaustive): Fanuc α-D21MiA5 CNC machining center Lehmann dividing head 4th and 5th axis Tool holder set Renishaw touch probe Fire extinguishing system Coolant tank / high-pressure pump Absolent oil mist separator Operating documentation Exact scope of offer as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 2007, Hurco TM8 CNC Lathe. S/No. TM8-01111057AAA (2007) with Winmax Control, Collet Chuck, Tooleye, Parts Catcher, 12 Station Turret, Tailstock, Swarf Conveyor, Multi-feed, Bar Feed Deb Eq Uqswhn Npohjcg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), In good technical condition and fully functional. Dsbewhbwgs Eq Uqhocg CNC DRAGON 100 x 100 mm.

Condition: used, Year of construction: 2007, Price: On request - Year: 2007 - Documentation available: Yes - CE mark available: Yes - Serial number: 789 Financial information VAT: The price shown is exclusive of VAT Dcsb Eqewfph Uo Uqhjg VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: excellent (used), Year of construction: 1980, Functionality: fully functional, Used CNC cylindrical grinding machine Make: FORTUNA Djbov Eyr Se Eq Uqhecg Type: T23 S1000 ASW 45 CNC Year of manufacture: 1980

Condition: used, Year of construction: 2017, Hurco TM6i CNC Lathe. S/No. ST6-16101AZEAAAH (2017) with Minmax Lathe Control, 200mm Diameter 3 Jaw Chuck, Tooleye, Parts Catcher, 12 Station Turret, Hydraulic Tailstock, Swarf Conveyor, Hydrafeed Multi-feed 35 Barfeed Dcjb Eq Uowhn Hujqheg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2000, Condition: used, Functionality: fully functional, Internal broaching machine Deb Eotpmnrjq Uqhocg Make: Arthur Klink Type: RISH 10x1000x400 Year of construction: 2000

Year of construction: 2000, Condition: excellent (used), machine/vehicle number: 03.2456, CNC Ibroching machine Arthur Klink RISH 6.3X1000X400 Dceb Eq Uqsirwiqjhsg Renewed in 2016

Year of construction: 1999, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 20, Used CNC internal broaching machine Dcsb Eq Usv Htlueqhjg Make: FORST Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: excellent (used), Year of construction: 2004, CNC Gear Hobbing Machine Horizontal Deb Eqjqaf U Ts Uqhjcg . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm . max module: 3