Used Ford 6610 Mark Ii for sale (24)

Condition: good (used), Year of construction: 2006, Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm Belrhod R N H Tjadcowl -Weight: 23.5 kg

Year of construction: 2004, Condition: excellent (used), MARK MSC37 37kw Wave Compressor!!! Screw compressor MARK MSC37 IVR (ATLAS COPCO screw stage) machine with inverter Technical data: capacity: 6,08 m3/min; 37KW motor; pressure 8 bar; mileage 12942h!!! 2004; compressor fully operational. net price: 18500zł Bwslrsh Ngc Eohadcsl gross price: 22755zł

Condition: good (used), Year of construction: 2014, operating hours: 18,624 h, Functionality: fully functional, machine/vehicle number: CAI770008, total length: 1,935 mm, total width: 620 mm, total height: 1,463 mm, motor manufacturer: AtlasCopco, power: 7.5 kW (10.20 HP), pressure (max.): 10 bar, Output: 60m3/hour at 8Bar (1000lit/min) Max. Pressure: 10 bar, Motor: power 7.5kW, voltage 400V Noise level: 66 dB(A) Weight: 335 kg Beloum I E Eorhadcowl 500 liter pressure vessel Dimensions: 1935×620×1463mm (LxWxD) The compressor includes a 500l pressure vessel, an air dryer. The compressor comes with a control unit, filters (basic and microfilter) and electronic de-sludging of the container and filters. Parts a are used on all compressors mainly screw blocks from Atlas Copco. MARK is a subsidiary of Atlas Copco

Condition: excellent (used), Year of construction: 2017, nominal heat output: 436 kW (592.79 HP), fuel: domestic gas H, Hot Air Generator Workshop Heater Hall Heater GAS heating system Bslrhadev Tqu Tocjwl

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Bwolrhstx Aknoadcel Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Year of construction: 2007, Condition: good (used), max. compressed air: 13 bar Bjlrhsd E S H Eoadcewl capacity: 390 m³/h max. inside temperature: 55°C max. outside temperature: 43°C electr. drive: 220 V, 1,64 kW weight: 80 kg space requirement: 600 x 600 x 1000 mm

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) Bwjlrhadov A U I Aocsl 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor

Condition: like new (used), MARK MSA15 15kw VALUABLE COMPRESSOR COMPLETE Screw compressor MARK MSA15/8 IVR machine with inverter,air dryer on 500L tank after service Technical data: capacity: 2200 L/min; Bwslrhadeq D A Swocel 15KW motor; 8 bar pressure; mileage 11113h!!! 2005; compressor fully operational. net price: 14500zł gross price: 17835 zł

Condition: good (used), Year of construction: 2009, MARK ANDY LP 3000 - 10" We present this Mark Andy LP 3000, Flexopress max format 254 mm / 10', year of manufacture 2009. Machine details:  Year of construction: 2009  Printing process: 6 x flexo printing  Roll width: 254mm / 10' Bolrhsumbl Esadcjwl  2 x Die-Cutting  Unwinder  Rewinder  VESTRA TURRET REWINDER  Max. Material web width: 260.35mm / 10.25'  Min. print length: 177.8mm / 7'  Max. Print length: 609.6mm / 24'  Max. Speed: 230 m/min  Drying system: 6 x UV Dryer  Web monitoring: BST Power Scope 3000 mot.  With analog screen on one side  Web break control  Turnbar  Machine dimension: 10,4m x 2,0m The machine is equipped with  Printingcylinder: 6x 68", 74", 80", 88", 100", 120", 124", 132"  Printingcylinder: 3x 90", 104", 2x 110", 112", 7 x 96"  10 x Anilox  Magnetic Cylinder: 80", 88", 96", 100", 102", 104", 108", 110", 112", 120", 124", 132", 134", 136", 148" Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: excellent (used), Year of construction: 2017, power: 271 kW (368.46 HP), Hot Air Generator Workshop Heater Hall Heater Bwolrev Tqu Hehadcjl

Condition: ready for operation (used), Year of construction: 2013, Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible. Belsrl Rbrerhadcewl

Condition: new, Year of construction: 2023, machine/vehicle number: ITJ781231, pressure: 10 bar, PRODUCT - MARK TYPE - MSM15D TM500 S/N - ITJ781231 YEAR - 2023 POWER (kW) - 15 OUTPUT. (m3/min) - 1.68 m3/min CIS (bar) - 10 BUILT. DRYER - yes Belrhaoqiz Acjdcowl ON TANK - 500L DOCUMENTS - YES

Condition: good (used), Year of construction: 2014, operating hours: 15,792 h, Functionality: fully functional, machine/vehicle number: DRY(C55)A3 5015, overall weight: 310 kg, total length: 1,535 mm, total width: 665 mm, total height: 1,550 mm, power: 7.5 kW (10.20 HP), fuel type: electric, fuel tank capacity: 270 l, operating pressure: 13 bar, pressure (min.): 13 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: refrigerant dryer, Very good compressor with refrigeration dryer Bslrhajvtn Azodcswl

Condition: ready for operation (used), Stainless steel vessel, Used machine Bwslrhadju Hkrcecsl Overall dimensions: 760 x 770 x 930 mm Weight: 119 kg Electrical data: 400V; 8 kW Material: Corrosion-resistant stainless steel Year of manufacture: 2000 Vessel capacity: 60 liters Temperature range: 0-120 °C.

Year of construction: 2018, Condition: refurbished (used), Digital hybrid press with 4 color digital + one Flexo UV LED Station + die cutting station + laminate + Cold Stamping Width: 330mm 4x charge corona unit 4x drums 2x fuser belt 1x belt cleaning blade 3x 2nd transfer upper roll 1x fusing roll 2x setting toner No 2 Bjlreh Ug U Eohadcowl 1x set of steal gears for Konica Minolta printing unit 1x sheet one assy 1x suction dustproof filter 1x 2nd transfer earth plate 1x set of fuser heat insulting sleeves 2x waste toner 3x Teknek cleaning rolls (web cleaning system) 1x FUSER UNIT (used working well spare part) + Magnetic Cylinders from Rotometal company • Die Cutting – 9,10,11,12,13,14,15 Inch • Printingcylinder– 12,13,11 Inch

Condition: excellent (used), Year of construction: 2017, Hot Air Generator Workshop Heater Hall Heater Bwjljv Tquyerhadcjl

Year of construction: 2015, Condition: like new (used), I sell the screw compressor: MARK MSB 30/10 Motor - 30kW, Beleiu Icvorhadcjwl Power - 3540 l/min., 212 m3/hr. Pressed air max.10 bar Year 2015. All working, like new.

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 315 kg, volume flow: 85.2 m³/h, pressure (max.): 10 bar, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK Bwslrhadevrfdtocol TYPE MSM11 D TM500 S/N ITJ874644 YEAR 2024 CAPACITY (kW) 11 OUTPUT (m3/min) 1.42m3/min CIS (bar) 10 HRS (DOC/GENERAL) 0 INVERTER NO BUILT-IN DEHUMIDIFIER YES ON TANK YES 500L DOCUMENTS YES

Year of construction: 2022, Condition: excellent (used), Screw compressor Elmag / Mark MSM 4 D-270 AD 2000 m. ES 4000 Basic, year of manufacture 2022, 127 operating hours, 7489 standby switch-on hours, max. Operating pressure 10 bar, Effective delivery 516 l/min, with refrigerant dryer, Bolrhadjma Hv Sscswl

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING Bwslrhajtubz Aodcjl  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 Bolrjvrcucohadcjwl BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER Belrhjtubz Usadcewl  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 Belrhaevrcnvodcjwl S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: ITJ874642, overall weight: 292 kg, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD.- MARK TYPE - MSM5.5D TM500 S/N - ITJ874642 YEAR - 2024 CAPACITY (kW) - 5.5 OUTPUT (m3/min) - 0.7 m3/min Bwslrhajvrcctodcel CIS (bar) - 10 BUILT-IN DEHUMIDIFIER - YES ON TANK - 500L DOCUMENTS - YES